The process of replacing the salon filter, you can say, overgrew incredible rumors. The procedure is very laborious and it is necessary to clearly understand everything in order to get to the filter. Oxygen comes through the heating and air conditioning system into the air purification system itself. A very important detail on the "Ford Focus 2" is the salon filter. Replacement is made regularly every 20,000 thousand kilometers. Regardless of the mileage, replace the deformed or damaged filter. Note that the cover of the component is located in the cabin, directly under the instrument panel. The process of replacing the part is somewhat simplified, if you put the original filter in the car - reviews of the owners of this car indicate specifically at this time. The fact is that the original filter is easily twisted, it is elastic, which makes it easy to bend. This greatly simplifies the installation process. And most importantly, after the release, it immediately takes the initial form. This all gives the owner the opportunity not to remove the gas pedal. If, however, the pedal is removed, then it is best to change the crimped staff nuts.
Filter replacement reports in the Ford showroom
To ensure that the air in the car's interior has become more qualitative and cleaner, it is necessary to regularly replace the salon filter. Also, at the time of another replacement, insert the carbon filter. How to change the salon filter to the "Ford Focus 2" ? The replacement is as follows. Initially, unscrew the three nuts, and remove the gas pedal. Thanks to this simple procedure, lift it up and try to slip the saddle for the steering shaft. The filter is here and hides. Then follows an absolutely simple procedure. We unscrew the screws, pull the far side of the lid in the direction of the pedals and remove it. We take out the old, out of order filter and install a new element of air purification. Now put the filter cover in place. Due to the inconvenient arrangement of the upper self-tapping screw, it will be difficult to screw it. On this at the time of installation, you have to spend a little strength and nerves.
How to facilitate the process of installing the filter cover?
You can resort to improvisation. Try not to screw the upper screw at all. Limit yourself to just the bottom two. Then gently place the gas pedal on its rightful place. How long does the replacement filter require a salon filter on the "Ford Focus 2"? The replacement of this part will take about forty minutes. We can say that the cost is a penny, but the air in the cabin has become much fresh and better. Repair "Ford Focus 2" is a laborious task, but the result will be excellent, as the freshness in the cabin is always pleasing to the driver and passengers.
How to replace the filter and do not remove the gas pedal?
How to update the "Ford Focus 2" salon filter? The replacement is made without removing the gas pedal. To do this, you need to "arm" with a 7/10 key (a plan), a litter and a flashlight. The gas pedal is attached to three nuts. With a little effort, you can reach the attachment nuts on the filter cover. In this situation, it will be difficult to twist the key, but "art" requires sacrifice. To simplify the task, it is necessary to unscrew the screws. Then remove the lid and easily remove the salon filter "Ford Focus 2". The new filter put in place is not so simple. Most importantly, try to squeeze it harder and shove it into the intended place. After that, the new salon filter for "Ford Focus 2" is ready. The cabin filter, as the name implies, cleans the air coming from the air conditioning and ventilation system. If to compare with other machines, repair "Ford Focus 2" is quite complex, time-consuming and not very simple process. However, the car has its advantages, namely the fact that the salon filter for "Ford Focus 2" is not at all expensive and is a practical and universal part. It is easy to find in any car supermarket.
Removing and replacing lamps in front vehicle PDDs
Repair of a vehicle such as Ford Focus 2 is quite a serious matter. What should I do if I need to replace only the PTF lamps? To do this, you need a Phillips screwdriver. We open the hood and unscrew the bolt on the front headlight, squeeze the latches. After carrying out of this procedure it is possible to remove a headlight and to remove wires in the parties. This will provide access to the headlight. Turn the light element towards the wing, you can remove it. Push the terminal and easily remove the lamp. We make its replacement and collect everything back. This procedure will take about twenty minutes.
Removal and replacement procedure for anti-fog lights
To replace the fog lamps, you will need a flat screwdriver and a ТОРХ Т25 key. First, you should use a screwdriver to screw off these headlights. Then they must be removed and unscrewed the two bolts, using the key. We take out the old fog lamps and turn off the terminal from the lamp. We make a replacement and install everything in its place.