As with the 10 "Winds" go to 7: the basic methods

Many users who installed the tenth version of Windows over the seventh, after some time of using the system, often wonder how to move from 10 to 7 "Windu". The reasons for such a decision can be quite a lot. Perhaps the user just did not like the system or was too difficult to master. Maybe the minimal hardware configuration does not allow to use all the features of Windows 10 in full. Yes, you never know what can be. Then there is an urgent need to solve the problem of how to switch to the "Vinda" with 7. To do this, there are several ways that allow such a return, but not all of them are equivalent.

Basic methods of returning to the previous system

In principle, in comparison with previous versions of the operating systems of the Windows family, the developers took care that the user could return to the previous version of the OS, if the new system does not suit him for some reason. True, there are not so many options.

In the simplest case, the question of how to move from 10 to 7 "Windu" within a 30-day period is solved quite simply. In the system itself there is, so to speak, a "sewn-in" tool for return. On the other hand, after a month this tool is deactivated, and you have to use other methods (recovery from a previously created image, if any, or a "clean" installation). For some models of laptops, the problem of how to switch from 10 to 7 "Windu" on a laptop (if the "seven" was installed initially, and the "top ten" the user installed himself), is solved using special sections of the boot menu in which you can reset the parameters to Factory condition. But next, we will consider common methods that can be used for all types of computer devices.

How with 10 "Windows" to pass on 7 method of standard rollback?

First of all, until a month has passed since the installation or upgrade of the system to the tenth modification, the simplest method of transition to the previous version will be the rollback of the system itself.

In order to solve the problem of how to switch to 7 with 10 "Windows" in this case, you need to go into the settings of the settings, select the update and security section there, then go to the recovery item in the menu located in the panel on the left. In the right part of the screen there will be a line of return to the previous system, under which you need to press the start button of the rollback process. After some time, the user will receive a "seven" with all the settings that were installed in it before switching to the tenth version.

How to switch from 10 to 7 "Windu", if more than a month has passed: recovery from the image

If rollback by the standard method is impossible due to the expiration of the 30-day period, you can do otherwise.

But there is one main condition here: in order to get a workable OS with all previously installed parameters, it is necessary that an image of the system stored in a logical partition or on a removable medium be created in advance. Here the question of how to move from 10 to 7 "Windu" after a month of using "tens" is solved quite simply.

If you save the image on the hard drive, you can roll back the system. If you use a removable drive, you need to boot from it.

"Clean" installation of the system

If none of the above options gives results, you will have to perform a "clean" installation of Windows 7 from scratch. To do this, you need a distribution, written to optical or USB-media.

But here it is important to pay attention to one nuance. Install the 32-bit "seven", if you installed the "ten" with the architecture of 64 bits, without formatting the system partition will not work. If Windows 10 had an architecture of 32 bits (x86), the installation of a similar seventh modification of the complexities should not be called.

Creating a Bootable Media

In order to install Windows 7 without problems, you can use not only the official distributions.

For example, the official utility from Microsoft called Windows 7 Software Recovery proved quite successful. Among other things, the main difficulty in installing the system is that for the "seven" in this case you will need a license key. But it's quite easy to get around this point. To activate, you will need to use a small program KMSAuto Net, although, by and large, it is against the law. However, for many users, this utility is a panacea that "cures" any Windows-system.

Conclusion

In conclusion, it remains to add that the problem of how to switch to 7 with 10 "Windows" is solved quite simply. But in order to use the official rollback tool available in Windows 10, you just need not miss the expiration date of its active state. Otherwise, you will have to use the other methods described above. At that, there can not be any saving of parameters and previously installed programs or user files and speech (unless, of course, the system is restored from the previously created image).

In all other cases ("clean" installation and reset to factory settings), the user will get at least a workable, but, so to speak, "naked" system, and user programs and applications will have to be installed again. If it is a question of files and documents, it is desirable to copy them first to either a logical partition other than the system partition or to a removable media. In any other way. No, even super-modern program for recovering deleted files, in most cases can not help.