Tricolor TV: setup, installation and proper use

Today, satellite digital television Tricolor TV has become very popular. To save on the total cost of Tricolor TV, tuning and installation can be performed independently.

In order to start installing, assembling and tuning this antenna, you need to have at hand: a wrench, a drill, a pencil, a cross screwdriver, a compass and a protractor. First of all, fasten the support to the transponder bracket. Pull the cable from the antenna into the house and connect it to the LNB IN jack. Then, according to the instructions, prepare the antenna cable. Satellite receiver and cable connect to the TV.

Now proceed to orient the antenna by pointing the dish to the satellite. Once you turn on the receiver, it will be in the setup mode. In the Tricolor TV setting starts from the moment that two bars appear at the bottom of the screen. In satellite television, Tricolor TV tuning channels will depend on the quality and strength of the signals. Now you need to focus on the azimuth and the calculated angles, which are specified in the instructions and refer to your city, they are available in the table. You can orientate the satellite and tilt the dish on a satellite dish of a neighbor. With the help of a compass, you should measure the azimuth or memorize the degree of direction of your satellite dish in this azimuth.

The correct Tricolor TV tuning will give the receiver a green bar. If this strip is not present, put an assistant on the TV that will correct your actions, or install a mirror that you can watch by adjusting the antenna. It is quite enough if the signal is within 70%.

Accurate Tricolor TV tuning will begin as soon as the receiver is turned on. At this point you will be offered to download the update of the channel list of Tricolor TV. After that, you need to register your receiver by entering your passport data, home address, serial number of the receiver and the secret code from the card.

It is better to do this on a special site Tricolor TV. Write all the data without abbreviations. Once the registration is completed, you will be notified of the contract number, and you will be able to activate the card.

Now let's take a closer look at how channels are configured in Tricolor TV.

Once you enter the "Menu", select the "Search Channels" button. On the warning screen, select "Yes" and click "OK." At this point, the process of searching for the desired programs will start, and you will need to save them. Click "Yes" and "OK" again. After that, the setup of the programs that are included in the satellite TV package will begin.

Now proceed to the next step, which will result in the instantaneous setting of additional channels in Tricolor TV. To do this, select "Settings" in the menu and click "OK". A window will immediately appear where you need to enter your secret password: "0000" - press this button 0 four times. Then select "Manual search" and press "OK". In the "Frequency" item, position the cursor and activate the value "12111", click "OK". Start by clicking "Start Search", confirm with the "OK" button.

The receivers of the new generation should have more than 100 channels.