To help housewives: how to sew trousers

Each hostess should know how to sew trousers, because it is much quicker and cheaper to do it at home than to wear long pants for seamstresses. In addition, it is not necessary for this to have a sewing machine!

Method 1

There are several ways of sewing trousers. Do it with a sewing machine is easy. But here you can also do different things. So, the first method is the simplest. To do this, you need a centimeter tape to measure everything well, a remnant to mark the fold and cut points, scissors, and a sewing machine. First you need to correctly measure the length of the trousers, which should remain after cutting. It is very important to do everything correctly so that the lengths of both trousers are equal. After that, the unnecessary part must be cut off. From the fold line it is important to leave approximately one-half to two centimeters of cloth per fold, along which a line is laid. To the edge of the trousers does not crumble, it must be overtaken. To do this, you can use both a real overlock, and an overlock foot-attachment, which simulates the desired seam. But if such a paw is not there, it does not matter, you can always use a thick zigzag! Next, it remains only to lay a line, which will podoit pants.

Method 2

This version of how to sew trousers, somewhat similar to the previous one, but until the moment the mistress is ready to process the edge. In order not to do this, you can make a double fold, that is, first turn and twist the edge of the trousers, and then turn and stitch a line about 1 cm from the edge. The result will be no less beautiful and reliable.

Method 3

The first two ways, described above, professional seamstresses would call "lazy." But you also need to know how to properly sew the men's trousers . To do this, you also need to use extra tape. Before sewing to trousers, it must be decanted. After all, if this is not done, after washing, it will shrink and pull off the trouser fabric. How to prepare the braid: it must either be ironed well with a hot iron with steamer, or simply hold a certain time in hot water. Next, the braid is attached to the trousers. Some experts advise doing this solely on the back of the trousers, some - around the circle. Here, the hostess decides for herself. It should be noted that the denser side of the ribbon must be sewn to the bottom of the trousers. Next trousers are sewn with a secret seam "goat". Pants are ready, and the seam is not even visible!

Method 4

It is also worth mentioning how to sew the trousers with a ribbon, which is glued. For this, you do not need to use sewing machines or even needles. It is necessary only in the store to purchase a special tape-sizing for trousers. Further, having measured the necessary length, the trousers are simply glued from the inside. For this it will be necessary to use only the iron, using a pair of glue, which is applied to the tape, melts and glues the fabric. It is worth noting that it is possible in this version of the pants to shorten both with the help of trimming, and simply bending the pant leg. All the pants have acquired the necessary length, and you know how to sew trousers. But it is worth noting that this method is the least reliable, since over time the tape has a property of being peeled off, and it needs to be re-glued.