The gate is rolled. Their features and operation

Currently, the roller shutters are considered one of the most reliable means of protection against penetration by unauthorized persons into the garage, warehouse, hangar, production premises.

The roller shutters got their name due to the fact that they roll up into a roll. Their main purpose is to protect the door and gate openings from unauthorized entry into the premises. In fact, they are a kind of blinds - shutters. The roller shutters consist of lamellas that roll into a roll and wind on the shaft, which is located in the protective box.

This type of gate for comfort and usability has no competitors. They can cover the openings, which are quite large - 5 m and even more in width and height.

Main Features

Roller shutters are movable lamellas, which are wound when opened on a roll by a roll. The shaft itself is located in a special protective box. Installation is carried out in two ways:

1. Outside the room.
2. Inside the room. This type of installation allows for maximum security, since it does not have access from the outside.

Automatic rolling shutters are usually used in private garages, shopping pavilions, warehouses, to protect showcases.

The main advantages of the gate rolling

• The gates do not take up space. The canvas is folded into a box that is located at the top of the door opening.
• Gate rolls - good protection of the premises from unnecessary eyes, sunlight and such external factors as precipitation and wind. In addition, they save space because they do not need a place to open (they are opened vertically upwards). Such gates have a relatively low cost and a long operating life.
• Fire-prevention gate rolls can easily tolerate temperature fluctuations, various precipitations and even significant mechanical impacts.

However, the most important advantage of rolling shutters is their profitability, due to the simplicity of the design, the minimum number of elements, easy installation and reliable warranty.

disadvantages

Rolling shutters for garage have a disadvantage - the passage is limited in height. However, if the installation of the waybill, then the height and width of the restriction of travel is not.

Decoration

The color of the rolling gate can be very different. If desired, they can be painted in one of the available colors, which will allow the gate to fit into any interior or exterior.

Rolling gate control

Rolling shutters are most often equipped with an electric drive. For remote control, you can use a special console.

How are the roller shutters

The rolling shutters work in a simple but quite practical system. Their cloth consists of rather narrow plates. This design allows the gate to be both strong and flexible at the same time. The movement of the web occurs along the guides located on both sides of the aperture. Above the opening is a shaft, which is driven by a special electric motor. Rolling shutters for garage open and close automatically. You can control them using the remote control, the size of which is the same as that of key fobs from car alarms. You can open and close such gates without leaving the car, having done just one click. In emergency cases (for example, if electricity is turned off or the automation fails), they can be opened manually.

Door leaf is made of steel or aluminum profile. Inside it there can be a special polymeric thermo- and sound-insulating filler. Therefore, noise does not penetrate outside and external sounds can not be heard inside the garage. The use of heat-insulating properties in general is difficult to overestimate. Profile height can vary. It depends on the size of the rolling shutters, taking into account that they are very durable and easy to operate.

The steel rolling shutters have a galvanized surface. In comparison with aluminum, they are even more durable.

For registration of an input in the shop which is inside of the shopping center, as a rule, establish a lattice rolling gate. Profile of this kind of cloth - with perforation.

Opening of the rolling gate with electric drive takes 10-15 seconds.

Installation

Installation of rolling gates with the possession of certain skills can be done on their own, but mistakes here are unacceptable. The presence of any distortions will necessarily affect the functioning and reliability of this design. Despite its outwardly seeming fragility, the compact roll-up gate is actually quite strong and durable. Their installation even in an unguarded garage will allow you to be calm for your car. In addition, rolling gates, the price of which pleases (from 20 thousand rubles), will save not only space, but also time.

Rules of operation

To avoid breakage of the gate and accidents, it is strictly prohibited:

1. Create any obstacles or stand in the way of movement of the canvas.
2. Use automatic rolling shutters that have malfunctioned or improperly adjusted equipment.
3. Exert excessive efforts to tear off the gate, and also hit them, accelerate their opening or move the jerks.
4. Open the gate with a remote control without visual control.
5. Make attempts to open the gate with a closed bolt or lock.
6. Install and clean equipment and accessories, replace certain parts of it without first de-energizing.
7. To clean the equipment use a variety of chemically aggressive agents.
8. Use the gate is not for its intended purpose.