Telephone socket, connection methods

Connecting an additional telephone socket will save you from interfering wire skeletons and greatly simplify the connection of the phone. This problem is quite urgent, although many people already do not use stationary devices. The fact is that it is almost impossible to find a specialist who will come to you only because of connecting a telephone socket, and if it is real, it will not be cheap. Therefore, it is better to make the connection yourself. To do this, you need the following set of tools :

· Telephone socket.

· Device for removing insulated wires or side cutters.

· Tester.

Screwdriver.

The standard among telephone sockets is RTSK-4. It was used even in the times of the USSR, but it still remained the most popular. The telephone socket is connected using a two-wire cable with a cross section of 0.3-0.5 mm.

In the telephone wires, the voltage is small, and there is no need to be afraid of electric shock , although the current can reach a hundred volts during a call, so it is better to turn off the device.

To add phone jacks, you need to do the following:

· The cable can have four, three or two wires. A telephone cable with four wires has the ability to service two lines, and a cable with three wires - only one.

· Modular jacks are used to attach telephone wires to the telephone home network. In general, they are labeled with the labels "B", "Y", "G", "R", according to the initial letters of the insulation colors.

· Connectors are divided into two sizes - large and small. Large ones are used to connect a dedicated line to the Internet, while small ones connect telephone sets with telephone handsets and wall wires to telephones.

· In electronic shops there is an opportunity to buy a lot of accessories. For example, a splitter will help you to connect two telephones separately to a wire on two lines.

· In order to wiring the telephone wires, you will need a 45.7 cm drill bit for the drill, which will allow you to make through holes anywhere.

· In order for the telephone socket to work, it is necessary to attach the wire to the input box in the place where it enters the house. With the help of special insulated fasteners you can attach the telephone cable to the wall.

· For connection, it is necessary to connect, according to the markings, the colored wires that are on the inner surface. If you have a standard telephone system and a telephone socket, it will be simple to make connections, and if not, you need to call the telephone master.

All described actions will lead to that the telephone socket worked. Connection, as you can see, is quite simple. It does not require much effort. In addition to private houses and apartments, the telephone socket is actively used to connect faxes to different companies.

It is very important to understand that the telephone network is the property of the station, and any work on its growth or change should be made precisely by the employees of this station. A violation of these rules can lead to great trouble. Therefore, you can make repairs yourself, only neatly, but the connection of new telephone sets is better coordinated with the telephone exchange.