Stove pipe: views

The chimneys are designed to create traction inside the furnace, as well as to remove gases and raise them as high as possible above the ground. But it must be taken into account that the higher the design, the stronger the thrust. And this, in turn, leads to heat losses. Therefore, the chimney must be designed with the selection of the optimum height, which provides favorable conditions for the use of the heating system.

The best version of the chimney is the use of chimneys made of stainless steel. Such products are characterized by the maximum set of positive qualities in relation to the minimum shortcomings. The following properties can be attributed to the merits of the stainless steel chimney:

- Simplicity and high speed of installation of the chimney ;

- the material is refractory, which allows it to withstand very high temperatures;

- the chimney from stainless steel can be laid and through wooden floors, not being afraid for their safety;

- long service life;

- a special way of connection, a wide range of shaped parts allows you to simulate the chimney systems directly at the installation site;

- aesthetic appearance, which does not require additional finishing;

- the optimal ratio of product quality and price.

Also, the chimneys of steel are lightweight, which makes it easy to transport and install them. This does not require a strong basis for their installation.

A variety of steel products is a heated chimney. It is a multi-layered construction that provides high thermal insulation properties. As a rule, such a product consists of the following layers: inner tube of stainless steel, then there is a heater made of basalt fiber (withstands temperatures up to 1000 degrees), CPVS mesh (excludes sliding of thermal insulation material), mineral wool insulation (withstands temperatures up to 300 degrees) , Outer tube. Welding flanges are provided to secure the product.

Also, the furnace pipes can be made directly from bricks. This method also differs in its merits and demerits. The structure of brick is distinguished by its reliability and durability, especially if you use a red stone, cemented with lime mortar. Also, such a chimney can give the interior a special look, especially if the design of the room is created in a similar style. However, the installation of such a structure is more difficult, it is necessary to constantly check the accuracy and evenness of the masonry. Also it is necessary to strictly observe the proportions of the components of the solution, because under the influence of hot temperatures it can quickly come into disrepair, the chimney collapses. When installing, you need a powerful and reliable base.

The choice of the chimney, the material from which it will be made, depends on the operating conditions, the requirements for it, as well as the personal preferences and abilities of the owner of the house. It is also recommended to consult with experts who will help to come to the right decision, take into account all the nuances and design features.