Scheme connecting the car stereo. The scheme of connection of a subwoofer to an autoradio tape recorder. Advice of specialists

Radio receivers for cars are sold with detailed instructions for connection. However, it is quite easy to get lost in them. In this case, you must consider the type of adapter that is installed in the machine. Many experts recommend strictly adhere to the connection scheme. Otherwise, the car stereo can be irrevocably ruined. First of all you should familiarize yourself with the main types of devices.

Connecting DVD Models

The scheme of connection of the radio tape recorders of the specified type assumes use of pass-through adapters on two sockets. As a rule, manufacturers do not use an extension cable for the subwoofer. In this case, you must start the device installation by connecting the stereo unit. To do this, you must carefully inspect the adapter. Many models are manufactured with linear outputs. In this case, the connection is made via a contact conductor. However, it is important to note that there are devices with coaxial outputs on the market.

For them, an adapter with a receiver is selected. The front speakers are connected via blue wires. Rear speakers can be connected via an adapter or a double adapter. Various subwoofers are used to connect the subwoofer. In some cases, they can be installed with insulators. A fuse is used to protect the stereo system unit. The output to the battery is usually indicated in red.

The scheme of installation of devices CD / MP3

Connection scheme car receiver of the specified type has two adapters. If we consider the standard model, then it is sold with two-way adapters. Each of them has several line outputs. A stereo receiver is used to connect the stereo unit. Contacts to it come with blue connectors.

Front speakers can be connected via an adapter or a contactor. In this case, much depends on the manufacturer. The rear speakers use a standard two-way adapter. Extensions for models are rarely used. The scheme of connection of a subwoofer to the radio tape recorder assumes use of the controller. As a rule, it has a blue connector.

Connection with retractable display

Scheme connecting car receiver with retractable displays involves the use of adapters for three contacts. In this case, the stereo unit is connected directly to the adapter. Adapters in devices are used with fuses. In some cases, the adapters are installed with insulators. A receiver is required to connect the stereo unit. The adapter is used in this case with a linear output. A two-way adapter is used to power the system. Some models have dual contactors. They are connected to the system via an extension cable.

Installing the recorder Pioneer MVH-07UB

Scheme connecting the car stereo Pioneer can not do without an adapter and adapters. The controller in this case is applied modular type. If we consider a circuit with a single-channel adapter, then the adapter can be connected via a fuse. To do this, the panel has a blue connector.

In some cases, the adapter for connecting the car radio is used with a fuse. For such vehicles, a contactor is required. First of all, a blue conductor is used to connect the speakers. The amplifier is used only under the subwoofer. In some cases, the Pioneer head unit with rear speakers is connected via a dual adapter.

Connecting the model Pioneer MVH-12UB to the subwoofer and speakers

Connection scheme receiver "Pioneer" assumes the presence of an adapter and two adapters of the contact type. To connect a stereo unit, you must use a controller. In this case, the fuse is installed last. The front speakers are connected via the line output. In this model it is painted red.

In order for the Pioneer car receiver not to fail, you need to check the insulators. The rear speakers can only be connected after the subwoofer. For this, a blue adapter is used. It has connectors of coaxial type. Red wires are fed to the rear speakers.

Connection diagram for Pioneer MVH-15UB

Scheme connecting the car radio "Pioneer" involves the use of a one-way adapter. The stereo unit in this case is connected quite simply. The adapter is used for this purpose on two connectors. To connect the front speakers there are green wires. The subwoofer of the model can only be connected via an adapter. In this case, the fuse is used without the receiver. In order for the system to function smoothly, it is very important to check the condition of the insulators. The connection to the battery connector is done last.

Installing the car radio Sony XAV-601

Connection scheme Sony car stereo involves using a simple adapter adapter. In total, the model has three outputs. In this case, the stereo unit is equipped with three line connectors. A fuse is used to protect the device. An extension cable is required to connect it. In some cases, an insulator is additionally installed.

However, it is important to note that it is not included in the standard package. The front speakers in the device can only be connected via gray conductors. In this case, the subwoofer is connected without an extension cord. In order to avoid short circuits, insulators are used. The rear speakers of the car are connected to the system last. The left speaker is connected to the blue wire of the second adapter. A red connector is provided for the right column.

Connect the Sony XAV-603 to a subwoofer and speakers

The scheme of connection of the radio receiver of this type assumes the presence of two adapters and one adapter. For a high-quality installation of the device, it is first of all important to deal with the stereo unit. In total, it has two line outputs. They are needed to connect the adapters. The adapter is only connected to the system via an extension cord. In this case, the fuse is normally used with a contactor. After connecting the stereo unit, you should practice the subwoofer.

To do everything qualitatively, you need two insulators. The wires to the subwoofer come in blue. In this case, an extension cable is not required. To solve problems with high humidity, pads are used. All connectors must be clean. After connecting the subwoofer, you can proceed to connect the front speakers. It is quite easy to do this. The adapter is required in this case with a coaxial output. A yellow wire is fed to the left speaker.

The right column has a blue exit. In this case, the wire is used in the corresponding color. The rear speakers, according to the standard scheme, are connected via the second adapter. The connectors must be colored green. The left speaker is connected via a red wire. On the right column you can see the blue connector. In this case, the wire is selected from the adapter of the corresponding color.

Connection diagram Sony XAV-605

The connection circuit of the radio receiver has two adapters. In this case, they must be of a contact type. The stereo unit of the car stereo is made with coaxial connectors. To properly install the device, you must first take the adapter. In total, six wiring depart from it. The controller is used without the receiver.

A blue wire is used to connect the stereo unit. The battery connector can be exited through the red socket, however in this case the wire is used with the insulator. A fuse is required to protect the system. It must be with the stereo unit. After installing the subwoofer, you only need to connect the speakers.

Installing the recorder Digital DCA-115: expert advice

The scheme of connection of the specified model of a radio tape recorder means presence of through adapters and three adapters. The fuse in this case is used with the controller. You can connect the device directly through the stereo unit. Also, the installation is allowed to begin with the connection of the speakers.

If you select the first option, the adapter is used with a linear output. In this case, a red wire is fed to the stereo unit. Front speakers are connected via the controller. Extension does not apply. The red speaker is taken to the left speaker. On the right speaker there is a blue connector. To connect it, use a wire of the appropriate color.

Reviews about the model Digital DCA-122

These car radio can easily be connected via a standard adapter. In the standard kit, it is used with contact type adapters. An extension cable is required to connect the stereo unit. It departs from the line connector. You can learn it by color (blue output). To connect the front speakers, a two-way adapter is used. In total, he has two linear outputs. First of all, it should be noted that the left column is connected via a red wire. The right speaker of the model has a blue connector. A wire of the appropriate color is used for it.

Then the subwoofer will remain connected. The extension cable for this is used from the first adapter. In this case, the wire is moving away from the coaxial output. If you believe the experts, the isolator from the subwoofer is installed in the last place. It is also important to note that the conductor must be led to the fuse. The connection diagram of the amplifier to the car radio has two contactors and only one adapter.

Installation of a radio tape recorder JVC KW-SD70

The connection diagram of the car receiver JVC assumes the use of two-period contactors. In this case, there are three adapters. The fuses on the model are switched on with the receiver. Installation of a radio tape recorder of the specified manufacturer should begin with the block of a stereosystem. First of all, the wired type adapter is taken. It has three small line connectors. They are used to connect speakers. In this case, the adapter must be used with the plug connectors.

If you believe the feedback of experts, then the fuse is more expedient to install in the last place. In some cases, the adapter is fixed with insulators. The stereo unit must be installed near the contactor. A standard adapter with coaxial outputs is used to connect the front speakers. In this case, the wires are gray.

A rear-end adapter is used to connect the rear speakers. Insulators in this case must depart from the line connectors. The left rear column is connected via a red conductor. On the right speaker there is a green output. Therefore, the wire should use the appropriate color.