Resuscitation flash drive. What is the best utility for resuscitation flash drives?

Despite its manufacturability and a number of undeniable advantages over optical media, USB-flash drives are still subject to the risk of failure. When a user is deprived of confidential data, exclusive photos or an electronic key in a single copy, it is time to think about the meaning of the word "catastrophe". However, even under the most unfavorable events, there is always a place of hope. In our case, the role of the latter is the resuscitation of a flash drive. Everyone who is dejected and those who once disdainfully treated the elementary rule of safe removal of the device expects a pleasant miracle. Really working recovery technologies will become available and understandable to you immediately after you have read this saving information. Quiet shiver and get rid of excitement - your flash drive will work again!

Memory that brings people down

In order to resuscitate the flash drive was a successful recovery process, it is necessary to understand what exactly caused the occurred digital tampering, and also it is necessary to know the model of the memory device (it is often enough to have information about the manufacturer). It may help you to remove some guilt from the fact that the manufacturer's promised reliability and security of storing data on storage devices such as the USB Flash driver are rather relative concepts than the proven truth. This can be confirmed by a number of reasons that significantly affect the efficiency and long-term use of the specified storage devices.

Main technological limitations

• The average period of data storage varies from 5 to 10 years (meaning "conservation" of information).
• Rescan flash can be impossible if it is exposed to radioactive radiation or high temperatures.
• The number of recording cycles is limited. Usually, the resource of use is exhausted when the value reaches 10,000 cycles for MLC devices and 100,000 for SLC (principle of operation).

There are a few more specific limitations. However, in the context of this article, the mention of them will simply be excessive information - we will miss the terminology that is difficult to understand ...

Under what conditions is resuscitation inevitable?

In the process of using the Flash-drive, often an unlucky user allows a fairly common mistake for a beginner-he extracts the storage device, so to speak, on the go, forgetting that it needs to be disconnected beforehand with the help of the OS software. This ultimately leads to full or partial inoperability of the flash drive, which is expressed in the following:

• The storage device is recognized by the OS as unknown.
• The file system of the Flash-drive is changed to RAW.
• When you open the USB flash drive, the folder is empty.

In other respects, there is a certain tendency to standardize risk factors, since mechanical damage or critical water impact will negatively affect absolutely any electronics.

Resuscitation USB-flash drive, or ways of its restoration

Depending on the above "symptoms of the electronic ailment" there are several algorithms for action. It is worth noting that some recovery methods can either not work at all, or give a positive result only after a certain time. However, if you follow the recommendations described, your chances of success are incredibly high. Believe in luck, and she will surely smile at you!

Method number 1. Resolution of the situation

A single copy of the archive information is an important reason to try to extract the data hidden in the digital depths. The main rule in this situation is that you do not do anything with the flash drive until the immediate recovery process starts (meaning attempts at rash experiments: formatting, recording, etc.).

• You will need a special program. Resuscitation flash drive (the process of data recovery on it) will be carried out using the software R-Studio. Why this program? It is free of charge and, despite the simplicity, it effectively returns lost (even formatted!) Information from digital non-existence. Among the "free" software - this is the best tool for data recovery.

• After you have downloaded and installed R-Studio, it is recommended to close all active applications before starting the software.

• On the left, in the main window of the program, select your USB-drive.

• Then activate the "Scan" tab.

• In the next window of the program, in the block where the size of the flash drive is written, specify the initial value "0" in the check-box "Start", and in the area below "Size" - the nominal capacity of the flash memory to be restored.
• Make sure that the item "Known Files" is checked.
• Then safely click the "Scan" button.
• After a while, the program for resuscitation flash drive R-Studio will complete the recovery process and require the user to perform some actions.
• In particular, you need to specify your USB-drive in the right area and right-click the context menu.
• In the list, select "Show content ...". The list of the reanimated files appears to the right, among which you will surely find the lost data.
• Right click and select "Restore" is the penultimate stage of digital reincarnation.
• The final is to select the directory to save.

Typically, this program for resuscitation flash drive is used once, because after some stress the user becomes prudent and in the future always duplicates valuable information on the hard disk of the computer.

Method number 2. Software failure

When the Flash-drive is incorrectly detected by the OS or the operating system refuses to work with the device, a specialized utility for resuscitation of a flash drive can help. Depending on the version of the controller used in the memory device, an individual firmware is used, which works with the specific control chip identifiers specified. Due to the specificity of this method, a step-by-step plan of action is proposed for your attention.

Step # 1. Determining the VID and PID controller

• Go to the Start menu.
• Hover the marker on the "Computer" section and right-click with the right mouse button to open the context menu - select "Device Manager".
• In the list of displayed components of the system, select "Universal Serial Controllers ...".

To the note: absolutely without a difference, when reanimation of a flash drive is performed, Transcend USB-drive or other kind of modification of the storage device requires identification of identifiers. Literally for all kinds of Flash-memory the described scenario will be identical.

• So, the next step is to open the branch of the section "Universal Controllers ...".
• Among the displayed devices, select "Memories ...", which, in general, is the designation of your flash drive.
• With the help of the same manipulation (right button + long pressing), call the pop-up menu, in which activate the "Properties" item.

• In the window that opens, go to the "Details" tab, where you need to set the "Equipment ID" parameter in the check-box.
• As a result, in the area below you will see the information you are interested in as numerical and symbolic values, which is the required component for determining the corresponding utility.

Step # 2: Finding the best firmware

The Kingston flash is being implemented with the help of the same low-level utility, because there is simply no more effective and safer option for today! The algorithm for finding the required program corrector is quite simple: you enter the identifiers copied to the Vendor ID (VID) and Product ID (PID) into the search string and download the found utility. But the most acceptable option is to contact the official website of the manufacturer in the technical support section.

Nevertheless, there are a lot of various Internet resources, the specialization of which is precisely related to this kind of recovery issues. Incredibly popular service iFlash has a truly amazing base of low-level utilities. The best software solutions, most of which from the manufacturers of flash drives - and all this in completely free access! Spending just a few minutes of your time, you will certainly get a positive result in the form of the necessary software.

Method number 3. Effective resuscitation

Flash drives, like many other types of Flash-drives, can be returned to electronic life by using the universal Flash Memory Toolkit or an equally functional HP USB Disk Storage Format Tool. To date, these are the best digital resuscitators. However, we make a reservation: such software solutions are aimed at total recovery of storage devices of a certain type, that is, directly through the inevitable process of formatting. So if all your attempts to get lost data from the digital abyss proved to be futile, and the price of information is not so significant to contact a specialized center, then it's likely that the performance of the flash drive for you will be a consolation prize.

Conclusion

As you understand, an incredibly multifaceted process of recovering flash drives was presented in a fairly capacious version. However, the question of which utility is better can be unequivocally answered with a short phrase: "The one that works!" However, relying on the material of the article, you definitely will achieve the desired result. Good luck and absolute reliability in data storage!