Home and familyAccessories

Plasma lamp - how to make it

Cunning inventions always interest ordinary people. Whether it's a complicated mechanism, or something unusual, you can still look at their work with enthusiasm. Sometimes there is an idea about creating your project. It's so interesting! Today, a popular device can be considered a so-called ball with lightning, in another - a plasma lamp. It looks very impressive. Therefore it is no wonder that many self-delinquents try to build a plasma lamp on their own. In theory there is nothing difficult, but how to do it in practice?

Components

The first question to be solved is: "What will be needed to create this unit?" After all, the plasma lamp does not roll in the garage!

For a ball of lightning will need several important components. The first one is a conventional incandescent lamp. The more it is in size, the longer you can observe discharges. About the voltage: here he does not play a special role. Well, if you find fault, the one hundred-watt lamp will do just fine. The second part is a board called the limit transformer. This component is one of the main components in this scheme. Everything will depend on him. Where can I find such a fee? You do not need to go far for this. Any old lamp monitor from a computer or a "thick" TV is equipped with this board. The third component is the case. It is not worth taking care of it, since the shell does not affect the operation of the plasma lamp. But for safety, and for the sake of aesthetics, a cardboard, wooden or plastic case does not interfere. Also worth knowing about tools. The main assistant for the creation will be a soldering iron. Thanks to him, the circuit of the plasma lamp will be able to connect.

Safety regulations

Observance of simple rules will help to protect yourself and others from unforeseen injuries. It should be remembered that an electric current is not a toy. The first rule is very simple: do not touch bare wires with bare hands. Contact made only with insulated tools. The second rule also applies to wires.

Only now it is necessary to take care of the viability of the scheme. You need to place bare wires so that they do not touch each other on occasion. Otherwise, a short circuit can occur, which will lead to unpleasant consequences. And one more important rule, which relates more to lovers of drinking coffee or tea while working. It is highly recommended that liquids are not present in the workplace.

Plasma lamp with your own hands

So, it's time for practice, because the plasma lamp is already waiting. To begin with it is necessary to get from the old monitor the necessary payment for the project. To do this, remove the back cover of the monitor. From the turn-off button, a thick, in most cases white post, should depart. If you follow it further, it will lead to the desired board. With the help of conventional wire cutters, it is worth cutting off the wires that prevent the converter from getting. They are not needed, so you can work rudely. If everything turned out, then you can move to the next, more responsible level. The soldering iron enters the case, because now the number one task is to solder the power wires. If you flip the board upside down, you can see two black wires on the side. They need to be cleared of isolation and prepared for further process.

The power cord should be soldered very carefully, as the wires coming from the board are very thin. One awkward movement, and you can ruin all the work. After finishing the place of the spike, it is necessary to wrap it up with an insulating tape. But early to leave the soldering iron. This tool will help in another important matter.

The lamp itself is not yet connected to the circuit. For her was the last, the thickest wire. It also needs to be soldered, only now to a light bulb. That's almost all the preparations are over. In the prepared case it is necessary to place all devices so that from above there is one lamp. An alarming moment is the time of verification. The power cord is inserted into the socket, the finger on the glass. If there were lightning inside, then it's done right.

Project

How to make a plasma lamp? Now this question will not lead to confusion. Anyone who is fond of engineering, simply must make this device. He not only will not miss, but will also become a trophy, which will decorate an honorable number of inventions.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.