Sports and Fitness, Equipment
Paraffin for snowboard universal: features of use. Which paraffin is better for snowboarding?
In the process of exploitation, the snowboard gradually starts to slip worse. The reason is the abrasion of the previously deposited paraffin layer. Let's figure out which paraffin is better for snowboarding in certain situations.
Universal
It is advisable to resort to the use of universal paraffin in cases when it is necessary to urgently increase the sliding qualities of a snowboard, however, the optimum temperature for the intended arrival is unknown. In other words, such substances are a good tool for all occasions.
Paraffin for snowboard universal is suitable for applying to the sliding surface of the board to prepare for driving in almost any weather, in addition to really extreme conditions. Excellent means of the plan at temperatures in the range from -15 to -4 o C.
Hot paraffin
This snowboard paraffin is familiar to every experienced rider. The advantage of the tool is the possibility of creating a stable sliding layer of one or another thickness. The main disadvantage - the need for a suitable iron, with which, in fact, and is the application of lubricant.
With the extremely limited time allotted for preparation of the inventory, the duration of the process of applying hot paraffin is a whole lot of inconvenience. It is also difficult to remove a stable layer if it needs to be replaced.
Waxed paraffin
The rubbed remedy appears rather soft and frankly short-lived. Despite this, professional athletes consider it an ideal option for self-adjusting the snowboard's level of sliding smoothly.
Paste paraffin
Another paraffin for snowboarding, which can be quickly used between races. The effect from the imposition of such funds is less durable even in comparison with rubbed substances. Usually pasty products are sold in banks. A special applicator is applied to it to cover the sliding surface of the board by hand.
This is the best paraffin for snowboarding for riders, who prefer to lubricate the board periodically during the skiing process. Especially effective means becomes during driving on a spring snow which quickly eats a base layer of the fixed hot paraffin.
"Warm" paraffin
Cold paraffin
Designed specifically for use in the most frosty weather. The application of a substance on the sliding plane of the board reduces the effect of sticking snow. Excellent manifests itself at temperatures in the range from -25 to -7 o C.
Hydrocarbon
Used by athletes when it is necessary to work out complex tricks during quiet skiing. Means of this category are characterized by economical consumption. Therefore, they are often applied to rental boards that are handed over to novice riders. Carbon grease is also an excellent option for processing boards when placing the board for storage.
Paraffin with fluorine content
It is more effective in terms of increasing the speed qualities of the board compared with carbon grease. Often fluorinated paraffin is used by professional riders in preparation for competitions and therefore is distinguished by a rather high cost.
The higher the percentage of fluorine in such a lubricant, the greater the speed the athlete can develop. The only disadvantage of the product is the formation of chemical components harmful to the environment when interacting with the snow cover, in particular, aggressive acids.
Racing
Here, the base lubricant is distinguished, which is used to form the primer layer, as well as the means for forming the top coat. The racing paraffin is used by serious specialists who are responsible for preparing snowboards for responsible competitions.
Paraffin for snowboard storage
Sooner or later the board has to be stored. To avoid damage to the snowboard at the end of the season, it is enough to treat its sliding surface with paraffin for conservation. The substance must be left on the board for the whole summer.
Paraffin for storage is quite low price. If desired, it can be used as an alternative to expensive lubricants when preparing a snowboard for skiing in warm weather.
Cleaning
Preparing the board for lubrication
Before processing the snowboard with paraffin, specialists recommend thoroughly cleaning the surfaces of the old product. For these purposes, special fluids are used. However, an ordinary household solvent can be used as an alternative.
After storing the board, a specific gray coating is usually formed on the surface of the board. It is his contact with snow that is the main reason for the slippage of snowboarding at the beginning of the new season. Remove the plaque can be any convenient tool, for example, a spatula or a metal ruler.
Application of paraffin on a snowboard
After processing, the snowboard should be left alone for about a day. After 24 hours, you can proceed to the cycling of paraffin, which involves a systematic reduction in the thickness of the layer. It is necessary to clean only the lubricant, which is not absorbed in the board. This is how you can achieve the best slip.
Some riders mistakenly believe that the excess paraffin wipes off independently during the skiing process. However, in most cases, the reluctance to make a thorough grinding of the surfaces leads to the formation of tubercles that not only look unaesthetic, but also impair glide.
Similar articles
Trending Now