Oil for terraces: characteristics and application features

If you own a suburban housing or a private house in the city, then be among those who try to make the atmosphere around them as comfortable as possible. To achieve this goal is impossible or rather difficult, if not to use natural wood, because concrete and ceramics are not able to convey such pleasant tactile sensations that arise in contact with natural wood and its natural beauty.

It is often taken as the basis of sex, which for long-term use is covered with protective compounds. And here it is important to take into account also that the material should not lose the ability to breathe, because it is so important to exclude the beginning of the development of moldy formations.

The need for oil

Despite the fact that the beauty of this material is quite fragile, it is gaining popularity, which is understandable, because in terms of the ratio of performance and cost, this option is an ideal choice. However, any wood used outdoors requires protection from fungus, moisture, ultraviolet, rot and wind. Even if you use more dense coniferous wood, they will require proper care, which will be able to extend the life of the products.

Solution

Today, the market presents a variety of ways of protecting and processing wood, which makes it possible to improve the quality of the material. But among such solutions there are not so many options that allow preserving the valuable quality of wood and naturalness. Oils and varnishes used for indoor treatment can not be used outdoors, because they will not provide adequate protection. That is why it is best to choose an oil for terraces, which can prevent deformation and give a special shine, emphasizing the natural structure.

The main varieties of oils for the floor of the terrace

Some consumers are wondering why use oil when it is possible to coat wood with varnish. However, the latter treatment option has a significant drawback, which is expressed in the airtightness of the layer being formed. Over time, the surface of the paint material is abraded, exposing the wood.

But the oil for terraces does not create a strong film, does not violate the air exchange and protects the material, deeply impregnating it from the inside. The construction market today offers a wide range of oils, including:

• Oils with natural wax;
• Oils with antibacterial additives;
• Oils, which include colorants;
• Oil compositions with anti-slip effect.

Characteristics of terra oil Osmo Anti-Rutsch

If you need oil for terraces, then you can choose the above, which is used as a finish coat. In the basis of vegetable oils, namely:

• Soybean;
• Sunflower;
• Linen;
• Ointment.

To the ingredients are added organic water-repellent additives, which have a high density and are evenly distributed in the mixture, preventing slipping after drying. This solution can be used after treatment of wood from rot, mold and blue.

It is quite easy to apply oil, it does not dry out during processing. The coating is silky matt, does not spread during application, and does not peel off after drying and does not exfoliate. This oil for terraces can be used, without previously polishing the surface. The composition is UV resistant, protects the material against temperature and humidity changes and gives it water repellent characteristics, prevents the appearance of rot, blue and mold.

Usage and consumption of Osmo Anti-Rutsch

For effective protection of previously colored wood, it is recommended to apply the oil in two layers, as a finishing coat, the composition is applied in one layer. If the air humidity does not exceed 50% and the ambient temperature is approximately +23 ° C, the drying time will vary from 8 to 10 hours. Consumption will depend on the properties and structure of the wood, as well as on the preparation of the substrate. One liter will be enough to handle 24 m ^{2 of the} surface, if the oil was applied in one layer.

Reviews of Neomid terracotta oil

This oil impregnation is a high-quality wood-protection mixture, which is made on the basis of natural oils. Among the ingredients are fungicidal and technological additives, as well as polymerized oil. There is a UV filter in the mixture, which guarantees protection from solar radiation. The product can be used for the primary treatment of wood, as well as for repairing the surface, on which oil has previously been applied.

This oil for terraces, which is recommended to read before buying the product, according to customers, is resistant to the effects of household detergents and moisture. The service life of wood increases, the appearance of the material remains at its original level.

According to the buyers, as an oil feature is the ease of its application. After drying the layer does not peel off and does not exfoliate. Users are advised to clean the surface before applying, freeing it of wax and dirt, as well as previously applied paint and varnish materials. If you plan to treat hardwoods, they must first be cleaned of tar and natural oils, using rags soaked in organic solution. Consumers argue that before applying the oil, the substrate should be dried well, because the moisture content in the wood should not be more than 18%.

Oil characteristics "Neomid"

Oil for terraces "Neomid" increases the resistance of the material to ultraviolet, prevents the appearance of fungi, blue and mold, gives the surface water repellent characteristics. The application should be carried out with a brush, evenly distributing the composition along the wood fibers. The number of layers can reach two, but sometimes it is required to completely impregnate the material. An hour after application of excess oil can be removed using a dry cloth. Work should be carried out if the thermometer has fallen below +10 ° C.

On the surface, the surface will dry after 6 hours, and the final drying should be expected after 24 hours, if the environmental conditions are met. Thus, the temperature should be above +20 ° C, relative air humidity should be about 65% or lower. Oil for Neomid terraces will be consumed in a volume of 1 liter for every 10 m2 ^of surface. Sometimes the flow rate decreases, and this amount of oil is sufficient for 20 m ² . After completion of work, tools and container should be cleaned with white spirit.

Characteristics of Tikkurila VALTTI

"Tikkurila" - oil for terraces, which is a colorless composition applied to a wooden surface in two layers with a brush or a sponge. In order to give the oil a shade, a colorant must be added to it. The mixture can improve the quality of the adhesion of old surfaces. It can be used for any type of wood. The soaking time is 40 minutes, the mixture will dry after 8 hours, and the working application temperature can vary from +20 to +22 ° C.

Oil "Pinotex"

"Pinotex" - oil for terraces, which is also quite popular today. The application can be carried out not only with a brush and a sponge, but also with a spray gun. The oil is longevous, does not form a crust on the surface after drying. To the ingredients in the manufacturing process, antibacterial components are added. The oil is well suited for softwoods that need deep impregnation. This oil can be decorated by adding a colorant. The soaking time is 40 minutes, you will be able to wait for full drying after 6 hours, but only if the ambient temperature shows from +22 to +23 ° С.

Features of V33 oil application

Oil for V33 terraces should be mixed before application and wood preparation. The surface must be absolutely dry and clean. If you want to work with hard wood, then you need to grind it well, and then remove all the dust. If old wood is to be treated, it must be cleaned first using V33.

When there is a need to impregnate the previously untreated wood, the first layer is applied in such a way that the material can be saturated profusely. After 15 minutes on the wet surface, another layer of oil should be applied, after waiting another 15 minutes. If after that the wood does not absorb oil, you can be sure that the protection is most effective. Applying a lint-free cloth, it is necessary to remove the surface from excess oil and leave to dry completely, which will take 24 hours. If the old coating is to be treated, then it is not necessary to apply the composition to the entire surface area. It will be enough to apply 2 layers on the worn areas.

Features of applying Alpina

Alpina terraces have a silky glossy gloss and can be used both outdoors and indoors. Shades of wood can be tinted by computer technology. Before application, the surface must be free of dirt, resin and dust, using the appropriate tool. The surface is degreased, the oil is applied exclusively to dry wood, which does not have an enamel and lacquer coating.

The product must be mixed before use, the brush should be used when working. It is necessary to achieve saturation of the surface. Do not start the work if the thermometer has dropped below +8 ° C. "Alpina" is an oil for terraces, which should be removed with rags after 15 minutes, this concerns surpluses that are not absorbed. On the end faces and edges, the application should be particularly intensive, if necessary, 2 coats should be applied. The tool is cleaned with soap and water.

Conclusion

If you protect wooden surfaces with special oil, this will significantly prolong the period of their use. It is important to choose the right composition, given the location of the coating. The floor of the open verandah and garden furniture need special protection, because their surface is constantly affected by aggressive humidity, sun and wind. Therefore, it is recommended to choose mixtures in which the content of wax is high.