Nail extensions on forms

Nail extensions on the forms are based on the use of special plastic shapes that mimic the free edge of the nail. They are glued to the tip of a natural nail with the help of professional glue. You can give them any length and shape, make the necessary sip and lay out the material.

Nail extensions on forms have many nuances, so it is better to entrust it to a specialist. If the procedure is not performed correctly, artificial nails will last very briefly. However, you can learn to do the build-up yourself, if you pre-practice a little and do everything very carefully.

Nail extensions on the upper forms take about 40 minutes. Such forms differ from conventional tips. To the upper forms, acrylic is not glued, because they have a perfectly flat surface from the inside. Due to this, the forms are easily separated from the nails and get shine without any special additional treatment.

Forms are placed under the edge of the natural nail and become the basis for the formation of artificial nails. Forms can be paper based on glue (used once) or metal (reusable). Paper forms are easier to fit on their own, they are designed for single use, and metal sterilized after each client.

To build the nails on the forms, you will need acrylic, tweezers, brush, varnish, forms, antiseptic, fine and coarse-grained file, spray disinfector, polishing file.

Before the procedure, hands should be washed and treated with a disinfectant. First, using a coarse-grained file, you need to remove the top glossy coating. The needle must be worked very carefully so as not to damage the cuticle. All movements of the nail file should be directed in one direction - in the direction of nail growth. The surface of the nails after this treatment should be perfectly even.

After that, the cuticle is peeled off. To do this, it is necessary to carefully push it away from the nail. Gel for the cuticle is aged for about a minute. It's better not to make an edging manicure before building up

On the prepared nails can begin to apply a thin layer of primer with a brush, avoiding the composition on the skin. It is necessary to give the nail surface a shine. After this, the procedure begins directly - nail extensions on the forms.

Then the shape is taken, bent at the marked places and put on the finger. You need to place the shape under the corners of the nail and fix it on your finger, gently combining the ends. Another primer layer is applied. Take the acrylic ball and put it on the mold, spread it over the surface with a brush. After this, a brush dipped in liquidation forms a cut line of the nail, its lateral sides and the base of the nail.

When the acrylic is completely dry (the process can be speeded up using a UV lamp), you can take off the shape. Nails should be in the same shape as natural nails. Particular attention in their treatment should be given to the zone of connection of your nail and artificial. To do this, put a little gel on the joint and move from it to the tip of the nail with stretching movements.

The cuticle is covered with a caring agent. Nails can be immediately covered with a clear varnish. You can also make nails with a usual varnish or create a pattern on them.

Important: Before performing the procedure, all used instruments must be disinfected, and the skin of the hands must be treated with an antiseptic.

Nail extensions on the forms can be carried out up to forty times using the same material each time. This material is elastic, high quality and allows you to work professionally. You can buy it in all the specialized stores.