HomelinessRepairs

Mounting foam "Penosil": types, characteristics, application features

Today, when performing many types of construction work, it is rather difficult to do without mounting foam. Improving sound and waterproofing, sealing seams without the use of this substance is sometimes even impossible. But the result depends on the quality of the foam-forming mixture, therefore, its choice should be approached very seriously.

There are many brands and types of foam mixtures for installation, but not all of them can guarantee a quality result. Among the materials that have proved themselves from the best side - the mounting foam "Penosil", produced by the company "Crimelte" (Estonia). This substance is white or cream colored, completely odorless.

Features

With the help of this brand sealant, it is possible to fill cavities of various types and sizes, to fix building structures. Despite the fact that the material is not widely advertised in the media, it is outperformed by many more well-known brands in terms of the volume released from the can.

Professional builders note the following features of the foam agent:

  1. Use all-season marks is best indoors, because at negative temperatures, manipulation with them is somewhat difficult.
  2. When using mixtures of winter variants, a small primary expansion is observed in the rooms. But in the cold, the material behaves perfectly.
  3. Foam mounting "Penosil Gold Gan" is characterized by an increased yield of the material.
  4. If the temperature of the surfaces to be treated is higher than 30-35 ° C, the material does not foam well or flows off at all. To eliminate the problem, it is necessary to obscure the area with the designed structure.
  5. In wet areas, the mass begins to bubble.

Properties of sealant

It is the characteristics of the material that ensure its high performance. These are:

  1. Atoxicity. After the polymerization process is completed, the material does not emit any harmful substances.
  2. Heat resistance. Its original properties sealant retains temperatures from -45 to +90 ° C.
  3. Excellent moisture resistance.
  4. Low percentage of heat.
  5. Fast setting. Mounting foam "Penosil" completely hardens for 10 minutes - 24 hours (the exact figure depends on the type of foam).
  6. High adhesion to the surfaces of materials of many kinds. It can be wood, plastic, polymer compositions, stone, metal.
  7. The combination of elasticity and plasticity. Due to this, it is possible to fill all the gaps as much as possible and subsequently avoid tears.

Types of material

The company produces three lines of materials of this kind:

  1. Gold Series. Foam mounting "Penosil Gold" is intended for professional use. Used for capital works. This is the construction or repair work in residential buildings, installation manipulation at production facilities.
  2. A series of Standart. Sealant, intended for professional and domestic use. Available in several versions - all-season, summer and winter.
  3. Premium Series. Means are universal, they work well in all weather conditions.

Application of foam

If professionals know how to handle foamy substances, home masters who have not yet had to deal with this material may not know some of the features of its use. To make the procedure not difficult, you need to consider the following rules:

  1. Connectable or sealed surfaces must be pre-cleaned, while removing dust and dirt.
  2. Hands should be protected with gloves - foam "Penosil" is poorly washed off, and sensitive people can cause allergic reactions.
  3. Before working it is necessary to study the manufacturer's recommendations, which are indicated on the can.
  4. Connect the can to the gun.
  5. Place it so that the jet is directed to the desired area. The space must be filled by one third.
  6. To accelerate the process, it is possible to sprinkle the top of the mass with water, so that the polymerization will occur faster.
  7. Wait about half an hour and make sure that the mass has completely expanded. If it is not enough to fill the seam, you need to add a little more mixture.
  8. After completely freezing (after 24 hours) cut the excess with a sharp knife and straighten the seams.

Consumer opinion

Most often the material has to work exactly the builders. What do professional workers think about Penosil? Foam assembly reviews have only positive. They emphasize that:

  • The material always has an excellent quality;
  • The structure of the mixture is uniform;
  • If there is a secondary expansion, its indicators are very low - 6-10%;
  • Shrinkage is absent;
  • Work with material easily.

Volume and cost of foam

Mounting foam is available in several standard forms. One of the differences - the volume, so you can buy the amount of foam needed to solve a particular problem. What is the volume of mounting foam "Penosil" in standard cylinders?

Several options are available:

  1. 300 ml. From a container of this capacity, an output of approximately 30 liters is obtained at the outlet.
  2. 500 ml. The tank provides almost 40 liters of ready-to-use foam material.
  3. 750 ml. The output is 50 liters.
  4. 1000 ml. As cylinders of this capacity give about 90-100 liters of mounting foam, they are used where it is necessary to solve large-scale tasks.

It is depending on the volume and is chosen for work foam mounting "Penosil". The price again depends on the capacity of the cylinder, and also on the type of substance. For example, a mixture of the Premium Foam 500 ml will cost 210-250 rubles, 350 ml - 180-190 rubles.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.