TechnologiesElectronics

Mobile air conditioning: self-installation

Now in the domestic market there is a lot of equipment that provides the necessary climatic conditions in the room. This can be both wall-mounted devices and more modern elements. One of these devices is a mobile air conditioner, the installation of which does not take much time and effort. Let's consider in detail all advantages and disadvantages, as well as technical characteristics and installation features.

general information

Such a climate system has appeared relatively recently, but has already managed to earn a lot of positive feedback. The mobile air conditioner, which installation is simple, differs high reliability and profitability. To understand how it functions, it is necessary to consider its construction. Compared to other devices, it has several advantages. First of all, it can be installed independently. Do not need to call specialists who will require an impressive amount of money from the owner. However, for self-installation it is necessary to have certain skills. For help, see the instructions for installing a mobile air conditioner. Therefore, installation of this equipment is possible at home. Especially it is possible to save money.

What is a mobile air conditioner?

Before installing this equipment, it is necessary to become acquainted with its design and other features. This climate device can still be called a monoblock. It serves to heat the air and feed it into the room. All components are located in the housing, so there is no outdoor unit. To make it convenient to move the device around the room, wheels were fixed on its body. That is why most users choose it.

The mobile air conditioner, which is installed indoors, has a compressor. It is not carried out on the street, as with conventional analogs, but remains in the room. This design has positive feedback.

Standard mobile air conditioner performs the following functions:

  • Heating or cooling the air to a certain temperature;
  • Drying it;
  • Heating of the room;
  • ventilation.

Principle of operation

During operation of the engine, excess heat is generated, which must be removed. For this, the standard mobile air conditioner is equipped with a corrugated pipe. It is output through a window or door to the street. This process, namely the removal of warm air, should be carefully considered. If this is not done, then the efficiency will be low for a device such as a mobile air conditioner. Installation of this type has a drainage system. It is necessary to collect the condensate produced. The process is carried out in two ways:

  • Condensate is collected in a special container, it must be periodically emptied;
  • The condensate is collected in a special tube, which is in a special container, the filling of which must also be monitored.

We can say that the candy bar is similar in its structure and the principle of working with conventional air conditioners. But there are significant differences, which will be discussed below.

Installing a mobile air conditioner with your own hands

Most people believe that this equipment is mounted very easily. Of course, the installation of a mobile air conditioner in an apartment is different from the works that are performed for standard split-system air conditioners. But even for these purposes certain skills and knowledge are still needed.

The main feature of the monoblock is that when you purchase the device, certain services of installation specialists are offered. First of all, it is necessary to remove the warm air produced by the compressor to the street. Therefore, they make a special window insert.

To install a monoblock in the room you should purchase some materials and equipment:

  • A sheet of dense plastics having a thickness of more than 9 mm. This material serves to isolate cold air from warm, located inside the room.
  • The device for sawing a hard material, namely a sheet of plastic.
  • Adhesive tape or paint tape, capable of withstanding a piece of plastic on the window.
  • Mounting foam, which provides protection against the penetration of water and air.

How to get started?

Before starting the installation work, you should think about a clear plan of action. If there are special skills, you can draw a mini-project. As a rule, the installation of a mobile air conditioner is made next to the window. At the same time, the air resistance decreases several times. It is also necessary to monitor the hose. It should not have fractures or other mechanical damage.

Making a window insert

As stated earlier, the installation of a mobile air conditioner in the window is carried out using a plastic insert. So, the process begins with the measurement of the window's dimensions. Further, the diameter of the air duct is known. With the aid of a pre-prepared tool (saw or scissors), the window insert is cut to fit certain dimensions. The result is a rectangle of plastic. In the center a hole is cut, which corresponds to the diameter of the corrugated pipe. The air duct should fit snugly against the walls of the opening.

Ensuring airtightness is an extremely important process. Installation of a mobile air conditioner starts with a window insert. It is the only obstacle to the cold air and moisture coming from the street. To ensure reliable sealing, use silicone sealant or mounting foam. Any of them can be purchased at the building store.

Installing a mobile air conditioner in a plastic window

The installation of the plastic insert is carried out in this order:

  • Open the window and fix it in this position;
  • Apply a self-adhesive tape or sealant to the plastic insert;
  • Attach the insert in the window frame.

Mobile air conditioning, installation (photo of such devices can be seen below), which is described in the article, is able to mount almost every home master.

How to do it yourself? Ways to install mobile air conditioners are very simple. After the completion of the preparatory work, the unit is assembled. First, you need to choose a future installation location. After that, one end of the air duct is inserted into the plastic window insert, and the other end to the exhaust port of the equipment. Mobile air conditioner, photo of which can be viewed in this article, must be turned on after the device has been standing in the vertical position for more than 3 hours. This concludes the process. As you can see, there is nothing complicated in it. With certain skills and a simple metalwork tool, the procedure can be performed in a short time.

Installation Rules

Installing a mobile air conditioner is a relatively easy process, but there are actions that can not be done:

  • To include the system through an extension made by own hands;
  • Arrange a ground connection to the gas pipe;
  • Install air conditioning in the bathroom;
  • Block the space near the apparatus;
  • Connect to a grounded outlet;
  • Give direct access to the mains.

If there is no time and the desire to install the air conditioner with your own hands, you can call specialists. However, you have to spend money on the work.

Any equipment has advantages and disadvantages. The mobile air conditioner was not an exception. Despite the fact that there are more positive sides, we will consider each species in more detail.

Advantages of mobile monoblock

Among the positive qualities of the device are the following:

  1. Mobility. Such devices have small overall dimensions and weight, which allows them to be transported and installed in other rooms. In the winter, the air conditioner can be assembled and delivered before the hotter weather.
  2. Easy installation. Installing a candy bar does not take much time and effort. All you need are tools and initial skills. The installation process is described in the article.
  3. Saving. What can you save on? First of all, on installation. You can do it yourself. When installing a split system, a lot of dust and noise is produced, and all this costs a certain amount of money. This will not happen here. In addition, the device itself is much cheaper. Its price is in the range from 10,000 to 50,000 rubles.

Disadvantages of air conditioners

It is necessary to follow the monoblock constantly. As mentioned earlier, when the compressor is working, condensate is produced, which is collected in a special container. Therefore, it should be periodically emptied. If the container with the capacitor is full, the device will stop functioning.

The next drawback is the noise produced. It is much higher than the operation of the split-system air conditioner. This is due to the fact that the compressor is not in the street, but in the room. According to noise characteristics, they are similar to kitchen hoods. Therefore, you should endure it to maintain a comfortable environment.

When the monoblock is working, a lot of warm air is allocated, so it is necessary to remove it to the street. This is done with a corrugated pipe, which is output through a window or door. As a rule, it comes bundled. Its length is too small, and the increase threatens to lose productivity.

Despite the negative side, many users are satisfied with his work. Its main advantages are ease of installation, mobility, cost, as well as high rates of creating optimal climatic conditions. Different models are widely represented in the domestic market.

Reviews

Many users of mobile air conditioners note their high performance, as well as ease of installation. Basic skills will be required for installation. To ensure comfortable climatic conditions in another room, you just need to move the device. Among the positive qualities are low cost compared to the air conditioners of the split system. Its value is in the range of up to 50,000 rubles. It depends on the performance and other technical characteristics.

The biggest drawback is the noise produced. This is due to the fact that the compressor is located not in the street, but in the room. However, to ensure comfortable climatic conditions will have to suffer.

Conclusion

The mobile air conditioner is an excellent device designed for ventilation of a living room. Despite the negative aspects of the device, it is all equally popular with many users. You can save on installation. To do this, you must have simple tools and basic skills. At a low cost, a high-quality device hides, which will create comfortable conditions in any room.

So, we found out how to install a mobile air conditioner.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.