Simple pattern: a dress with a skirt is the sun - the perfect outfit for the summer

Summer is the time of the year when it's time to fill up your wardrobe with airy bright outfits, which will perfectly emphasize all the dignity and at the same time will be practically weightless, so as not to impede movements on a hot day.

The perfect option, of course, will be a dress: no belt at the waist with a lock or buttons, like on a skirt, or a tight figure of trousers, in which it is terribly hot, but only a lightweight tissue that allows the skin to breathe.

The hit of the season at the moment is a dress with a sun-flared skirt. It is about how to sew this model, and we will go further.

How to start sewing?

Experienced masters will agree that the right material is half the battle. From the quality and texture of the canvas depends both the planting, and the complexity of the processing, and, naturally, the appearance of the product as a whole. To sew a dress with a skirt, the sun is best of flying and flowing fabric, which does not fray and lies down in beautiful folds. This can be crepe-chiffon, knitwear, oil, staple, cotton, cambric. Today, stores offer a huge selection of canvases, so there is something to choose from. As for the coloring, then it is already necessary to rely on personal preferences. The only thing to remember is that ladies with lush forms are more suitable for a fabric with a small print without horizontal stripes.

Material selection

The eternal question: how much tissue do you need to buy, so that a pattern is placed on it ? Dress with a skirt, the sun - the product is quite expensive in terms of material consumption. And to calculate it is not difficult. Four lengths of the skirt + the value of the measurement of the waist circumference, in order to cut a circle of the desired length, on the bottom of the product and one length from the shoulder and just below the waist for the top.

Here it is necessary to take into account the width of the roll. In most cases, it is 140 cm, which is quite enough for a long, and for a short dress. In both cases, the fabric is typed in the same way. If the skirt is less than 70 cm in length, then 2 lengths of the bottom + 1/3 of the waist circumference will suffice. In this case, two semicircles will be placed one below the other.

Selecting accessories

When the required amount of material is counted and the type of canvas and the color is chosen, it's time to think about the hardware. First of all you will need a thread in the tone of the fabric. If the canvas does not stretch, then it will be necessary to buy a secret zipper with a length of 60 cm. If it is planned to make a silhouette not fitted, but on an elastic band, then, of course, you need a piece around the waist. For decorative design, you can take a couple of beautiful buttons and at the cut out a droplet on the back or chest.

Building a template for the skirt

Another important question: how to build a pattern? Dress with a skirt, the sun is made of four parts: the front and back of the top and two skirts of the skirt. To build the templates of these elements of the product, you need to measure the chest girth, waistline, chest height, back width, backrest height and passing from the shoulder to the waist and the breadth of the groove solution. It is very easy to build a skirt with your own hands. On one edge of the material lay the length of the skirt + allowance for processing about 2 cm, then 1/3 of the waist circumference and again the length + allowance. Next, on the middle segment, you need to determine the line of the cutout for the waist. To do this, find the middle and, focusing on it, draw a semicircle with a radius of 1/6 of the "waist circumference" measurement. After this line, the length of the skirt + allowances for the processing of the bottom is laid on the canvas and all the marks are joined in a semicircle. The second panel is cut out similarly. If you need a long dress with a sun skirt, then simply increase the length of the panels of the bottom of the product. The construction can be done directly on the fabric, without using paper patterns.

Building a template for the top

How is the template stamped? What difficulties does the pattern have? Dress with a skirt-the sun - one of the simplest products. And the upper part of it is constructed as simply as the bottom. For this part of the dress you will need a paper template, so you will need several A4 sheets. They are connected so that you can draw a rectangle with sides equal to the length from the shoulder to the waist in the front and the value of the girth of the chest. Immediately determine the line of the chest in accordance with the height of the chest. On one side, half the width of the backrest is marked on it. On the opposite side - half of the solution tuck. Then determine the area of the armhole, which is equal to ¼ of the chest half + 2 cm. Then, from the upper corners of the drawing, mark the throat area and the shoulder seams, which are lowered by 1.5 cm to the edge. On the front half of the mark of the groove solution, a perpendicular is lifted and a tuck is drawn along the shoulder line (several centimeters are retracted, the guard is put down and lowered to the starting point, and the shoulder seam should be extended by the same amount of centimeters. If it's a dress for a child, then you do not need a dart at all.This will be the simplest pattern.The dress with a skirt-sun can be sewn by constructing the bottom of the product straight on And the fabric, and the template of the top made on the T-shirt of a child.

Assembling the product and processing sequence

When all the elements of the cut are ready, you can start sewing. First, close all the darts of the shelves, then connect the shoulder seams. To make the product comfortable to wear, it is made with a zip either on its side or on the back. In the latter version, the details of the backrest and the back of the skirt will need to be cut in half in half. The top and bottom are connected in sequence: first, the top and skirt are completely sewn together , and then they are joined along the waist line. The skirt-sun is sewn by the hands very simply: join lateral seams, and in a back cut insert a zipper.

It is often enough to insert a rubber band into the tack weld. And if you make the top broad enough (it does not spoil the look, if you take a flowing, lightweight cloth into the work), then lightning will not be needed.