Mangals with their own hands for recreation at the cottage and departure to nature

The mangals produced today are available in such a wide range that the eyes run out: forged, metal, brick, of various sizes and shapes. The choice is really great, but you can do it differently. Under the power of each mangal make their own hands: one stationary and one folding to travel to nature, for example. Manufactured independently the brazier has a number of advantages, essential for some and useless for others. Mangals with their own hands will be manufactured exactly as the owner himself wishes, in addition, it will help to save money.

Building mangal is not difficult, and it will take only a few days. Before the beginning of construction it is necessary to choose a site on which the brazier will stand. Do not install the structure near flammable objects, or near a house or a neighboring fence.

Mangals with their own hands can be made in various designs - brick, metal. So, about everything in order.

Stove-barbecue with own hands made of bricks

If for the construction you have chosen a brick, it is already clear that the brazier will be stationary. Working with bricks involves a laborious process and greater attention to structural features.

Mangals with their own hands made of bricks are reliable, strong and durable. For their construction a special heat-resistant brick is chosen. The casing is usually made of tiles and reinforcing mesh. It should be noted that the building material must be not only thermally stable, but also moisture resistant. Metal parts must be made of stainless steel.

Like any other structure, the brazier is installed on the foundation. It is necessary to dig a hole up to 70 cm deep, the bottom of which is covered with sand. Formwork is established and the reinforcement is laid, after which it is possible to pour concrete. It will take not so much, depending on the size of the brazier.

After the construction of the foundation, you can proceed to install the structure itself. Mangals are installed in different designs, in this case, the construction will include a conventional oven, where you can prepare food. Also popular are barbecues with a small table for kitchen utensils, which allows not to run into the house, but to have everything at hand. By design and shape, they too can vary, and therefore you can fully make your project, if at least a little understand it.

Metal braziers

In addition to the brick, another material is used for the construction of the barbecue - heat-resistant metal. Usually its minimum thickness is 2-3 mm. Having welding skills, you are able to make a simple brazier for making juicy shish kebab for a family holiday. And if there is no such experience, then it is possible to make a design on bolted connections.

With this design, the depth of the brazier plays an important role. If it is too small, then the shish kebab will burn, if large, then the cooking will take quite a long time.

The brazier will be a rectangular box with holes in it on the sides along the entire perimeter. This is a mandatory requirement, due to which the correct air flow is ensured.

With metal, it's easier to work, and therefore you can add some decorative elements that will give the barbecue an unusual look. In the design, you can add a small roof, little help from it, but it looks beautiful.

Among other things, some craftsmen came up with a design for which you only need a cylinder (gas). Mangal with their own hands turns out to be original and unusual. Of course, this is unsafe, and before carrying out the work, it is necessary to remove the remains of gas. Bolon is cut in half, the bottom and the upper part remain, the legs are welded and the brazier is ready!