Laying a laminate on an uneven floor: tips and tricks

The strength and durability of floors made of laminated coatings depend solely on the quality of the substrate preparation, otherwise the material will burst, deform, and creak. Different types of coatings are deformed in different ways, the time can be from four months to a year, and this applies to both glue and chateau variants. Laying the laminate on an uneven floor should be done after the base has been prepared.

First, you need to assess the degree of unevenness of the floors in the room. This is done through an ordinary building level, which will immediately show all the existing defects. The irregularities in the drop should not be more than two millimeters per running meter. In the presence of excesses, it is first necessary to eliminate irregularities. There are several ways, and the choice of one of them depends on the very basis. If the laminate is laid on an uneven floor, which is made of concrete, then everything is quite simple. It will be necessary to get rid of the floor covering, which is already there. The whole floor should be inspected for cracks and other defects. Any shortcomings can easily be eliminated by means of concrete screed or self-leveling mixtures. It is worth saying that the screed is a more troublesome business.

Preparing the floor for laying the laminate

It is worth remembering that this coating is laid exclusively on a dry basis. If the laminate is laid on an uneven floor made of wood, it will be necessary to eliminate the creaking of the floorboards, all kinds of irregularities, and also the crevices between the boards. If the boards are sealed, they can be secured with self-tapping screws or nails. All the slots are required to be puttied. So you can improve the quality of thermal insulation, as well as sound insulation. Between the individual boards, irregularities can be eliminated by means of a hand tool or a grinder. Otherwise, the laminate strip may lie unevenly, which can eventually cause further cracking or breakage. You can use the mixture for wooden floors , which have already been mentioned. Sometimes it is appropriate to apply sheets of drywall or plywood. Experts do not recommend the use of sheets of particleboard, because they are a non-environmentally friendly material and are capable of releasing harmful vapors for humans in the process of operation.

The rules for laying the laminate indicate that it must be staggered in staggered order. It's easy to do, because on each sheet there are all the necessary locks. Laying the laminate on an uneven floor is no different from other options, except that you first need to prepare the base. After the completion of the preparatory work, you should proceed to the main ones.

It is also worth remembering the need to lay a substrate to finally eliminate irregularities. In addition, it will provide a better sound insulation, as well as serve as additional insulation for the premises.