"Kaleo" - warm floors: description, characteristics, installation instructions. Customer Reviews

If you are interested in the brand "Kaleo", you can always buy the warm floors of this manufacturer at an affordable price. This system is a universal film suitable for any type of finish coat. If you are faced with the task of quickly installing a heating system, then the described option will be the best solution. It is not necessary for this to begin repair, to make laying of a warm floor it is possible where it is necessary. This can affect the coolest places in the room. A similar system is also suitable for wood coatings, it is able to create a uniform and gentle heating. The thickness of the system is 0.42 millimeters.

Description of the film underfloor heating system

Recently, the brand "Kaleo" has become quite common, the warm floors of this company are a two-layer thermal film, inside of which there are carbon heating elements, as well as a copper bus. It is located along the film. In the process of connecting to the power grid, the coating begins to study anionic particles and infrared rays of the far spectrum of action. Electricity is supplied by copper wires. But the connection of the thermal film to the network is done in a parallel way. The substrate for the warm floor is necessary and used for the purpose that the heating element directs the flow of heat to the floor covering. The substrate has reflective characteristics. That is why when stacking the system you can not worry about the fact that the ceiling will also warm up at the neighbors

Positive characteristics

On sale today you can find products in a wide range of brands "Kaleo", warm floors are no exception. Before buying it is worth considering the main advantages and disadvantages of the described system. Among the first, one can distinguish ease of installation, economy and maximum security, the latter of which is confirmed when compared with other systems. Any home master will be able to perform installation work in just 3 hours. Savings are manifested not only in the process of laying, but also during operation. The installation does not involve the arrangement of screed, as well as the use of all kinds of mastics and glues, which will save money. If you decide to choose a brand of "Caleo" brand, you can buy the warm floors of this manufacturer in the right footage, and then divide the film into a certain number of modules. After the installation, you will be able to save electricity, as when using such systems, the amount of bills is reduced by 20%.

Quite often, modern consumers are especially worried about security. Infra-red heaters in this respect are more suitable variant in comparison with electric warm floors.

Feedback on the durability of the outdoor infrared heating system

The manufacturer uses patented technologies to manufacture the described systems, which allows to ensure almost trouble-free operation for a long time. As a confirmation of the consumer feedback. As practice shows, even with mechanical damage only separate sections and strips go out of order. The rest of the system continues to work properly. Consumers emphasize that the film is not corroded. A manufacturer provides a guarantee for 15 years.

Mounting recommendations

Infrared warm floor "Kaleo" you can install yourself. It can be laid under a parquet or a laminate, however in this case it will be necessary to lay a polyethylene film, it begins to provide protection of system against hit of a moisture. Initially, it is necessary to check how strong the rough surface is, after the master starts laying the reflector, which may be "Izolon". When you stacked the warm floor of the "Caleo", the reviews of which were presented above, in the next step you can proceed to the flooring of the film itself, the next layer will be polyethylene. A laminate or parquet board is laid on top. If you chose linoleum or carpet as the finishing coat, then it is necessary to lay fiberboard or plywood on top of polyethylene, this is done to prevent damage to the thermal film.

The method of laying the warm floor for linoleum or carpet

The film warm floor "Kaleo" will perfectly function under the above-mentioned decorative coatings. Initially, it is necessary to check the quality of the rough coat or screed. The heat-reflecting material should follow, as in the above-described case. Over it comes the film Caleo, and after all the layers are covered with plastic wrap. Then comes the fiberboard or plywood, and the final coating will be decorative: linoleum or carpet.

Nuances of laying tiles

At the first stage, materials are prepared, namely a warm floor kit, as well as a film, an adhesive tape and a fiberboard. Specialists especially emphasize that it is forbidden to use materials based on aluminum foil. It is important to determine the surface area on which the warm floor will be located. After that, you can begin to cover the heat-reflecting material. The thermal film unfolds on top without an air gap.

After that, the thermostat is installed. It is also important to remember the necessity of laying the installation wires, after the master determines the location of the insulation removal. The next step is to connect the wires and thermo film. It is important to isolate the connection points well.

Conclusion

Warm floors "Kaleo", the installation of which you can be carried out independently, must necessarily be connected to the thermostat. The latter is connected to the electrical network. Before you finish the work, the system should be tested, only after it is possible to lay polyethylene film. The final stage will be the laying of the finishing floor covering. It should be remembered that not every coating can be used for this.