Installation and the device of slopes from gypsum cardboard

Every good householder tries to make his house more beautiful, warmer and more comfortable. It is almost impossible to achieve this with old windows, in which cracks have already formed, where the cold wind blows out, and they do not add aesthetic beauty. There is only one way out - to change the windows to new ones. But the replacement itself is not the end of the repair work. After installing new windows, you still have to cope with the slopes. As a rule, many owners try to solve this problem independently. Arrangement of slopes from plasterboard Will help to accomplish this task.

Material and technology

Make slopes independently by any man, who once in his life held a hammer in his hands. The method of decoration is quite simple, even amateurs of finishing works will cope with it, and it will not take much time. Slopes of gypsum board, device Which are described in our article, will look neat and stylish at low financial costs.

Previously, they made slopes from simple plaster, applying it in a thick even layer. No matter how hard the experienced masters tried, it was almost impossible to make the angle perfectly smooth, and skill and skill played an important role. In addition, the plaster dried for several days, which created a certain discomfort for the owners of the house. Now the slopes are made of plastic, but this style is more common in offices and public facilities due to the simplicity of treatment and the creation of a business image.

The most common in apartments and houses is the device of slopes from plasterboard. It is quite simple to install and does not require large material costs.

Slopes from gypsum cardboard: device, photo, finishing methods

Wizards for assembling slopes use a variety of techniques to perform such works, which can be seen in the photo in this article:

• Some practice fixing sheets of gypsum board on metal profiles, which are still used for finishing walls and ceilings.
• Others fasten sheets on foam, and sometimes even on shpaklevku.
• Particularly skilled professionals manage to combine the above-described types of fastenings for particularly complex window openings.

At any method of furnish new windows will please with the kind and quality if to adhere to all requirements of technology. Below is considered the device and finishing of slopes from gypsum board in more detail.

Mounting with metal profile

This method is great if the walls are also covered with plasterboard. In this case, you need to cut out from a solid sheet details for measuring slopes. A basic frame is created, which is equipped with additional parts for a more solid connection. The fastening itself is the same as on the walls, and a certain order of actions is strictly maintained:

• The profile needs to be inserted in the vertical and horizontal levels.
• To make the device of slopes from gypsum board passed without problems, it is necessary to make exact measurements of details and cut them out of a single sheet.
• As a heater between the plasterboard and the wall is placed a layer of mineral wool, sometimes using the usual mounting foam, then it is necessary to take into account its ability to expand.
• With a screwdriver, the sheets are fixed.
• Formed cracks are sealed with a sickle, and put on top putty.
• The angle between the wall and the plasterboard is covered by a perforated corner, which is attached with a stapler or sits on the putty.
• Further, the entire slope shpaklyuetsya, mopped to perfectly even condition and painted.

Such installation and the device of slopes from a plasterboard is fast enough and will not bring in a house a lot of dirt, but it is necessary to consider, that the window aperture will be a little bit less. In addition, it is necessary to spend money on a heater between the wall and the sheet.

Slopes glued to the mounting foam

This method of fastening is used only in extreme cases, for example, when there is simply no place to install a metal profile, or the wall structure does not hold the dowel, and the putty does not stick to the surface. Such problems are known to the owners of old houses, in which wooden window blocks stood.

In such cases, with the help of foam, drywall is simply glued to the wall. During the drying of the composition sheets can be screwed with screws with a long bonnet. After the assembly foam polymerizes, the screws can be unscrewed as unnecessary. Arrangement of window slopes from plasterboard This way is done quickly and with minimal effort.

The disadvantage of this method is that the foam can expand and deform the slopes, as a result - making the corners absolutely smooth is almost impossible. But the foam acts as a binding material, and as a heater, performing its functions on any surface.

Preparation for planting on glue or putty

This method is very simple in its technology and, as a consequence, one of the most common. Accurately performing the algorithm of actions, you can get the best quality work in the shortest possible time:

• You need to start by cutting the mounting foam, with which the windows were fixed, and cleaning the surface of construction debris, dust, old wallpaper and putty.
• Further, it is necessary to process the surface, where the slope will be fastened, the primer. Residents of the first floors are recommended to treat the site of the slope also with antifungal impregnation because of the increased sensitivity of materials to dampness.
• The device of slopes from gypsum board requires the use of gypsum putty for gluing the cut strips on the wall. In the construction shops there is a large selection of material, and consultants and instructions in this will help.
• If there are large cracks on the wall where the slope will be fastened, then they need to be sealed with putty or plaster. If the potholes are insignificant, then it is not necessary to repair them, as the putty put on the sheet of plasterboard will fill them themselves.
• Next, you need to carefully measure and transfer them to the drywall, using a construction knife to cut the top layer of the material along the contour.
• Then you need to put some pressure on the base. It will crack clearly along the line, and it remains only to cut the top layer from the other side.

Slopes of plasterboard: device for putty or glue

After the preparatory phase, you can proceed with installation:

• Begin the installation from the topmost panel. It is enough thick layer to apply the mounting glue with a spatula on the side, which will be closest to the window. Over the entire surface that remains, the solution is applied with dots with a distance of 30 centimeters.
• The workpiece lies on the top panel, while a prepared groove is inserted, lubricated with mounting glue. If the glued sheet of plasterboard is to be fixed, then this is done with the help of supports or screws.
• It is necessary to allow time for the adhesive to dry. Detailed instructions can be found on the packaging.
• Further, the perforated corner is attached using the same putty or a conventional construction stapler.

Stage two - finishing

The final stage includes the following steps:

• The device of slopes from gypsum cardboard requires careful processing, therefore it is necessary to seal with filler and serpyank all joints three times, leveling the last layer with a trowel brush.
• The void that appeared between the windowsill and the wall is usually blown with foam. After it dries, excess parts are cut off, and the seam shpaklyuetsya. Do not forget that the mounting foam has the property of increasing in size, so you need to be as careful as possible with its dosage.
• Painting slopes with acrylic paint or oil, you can also paste wallpaper or put a tile. That's all, the device window sills from gypsum board is almost finished.
• At the final stage, you need to remove the protective film from the window and treat the space between the frame and the slope with acrylic sealant . The product will fix the putty and will not allow it to peel for a long time. A surplus sealant is eliminated with a damp cloth.

Helpful Tips

Will help to put in order the newly installed windows slopes of plasterboard. The device and finishing with their own hands will require compliance with certain rules:

• To ensure that no fungus develops under the established slopes, it is necessary to pre-treat them with an antifungal primer. In addition, if all instructions are correct, and the slope with the adhesive is firmly pressed against the wall during installation, the appearance of the fungus will be minimized.
• Drywall is now available in different types, but give preference to moisture resistant material. And we must remember that it is intended only for internal works. After the correct putty and painting of such structures, no moisture is terrible.
• Slopes of plasterboard - this is a fairly sturdy construction, but it can not withstand a strong hammer blow.

Conclusion

Slopes of gypsum board, the device of which is produced correctly, will last for more than one year. As you can see from this article, making them with your own hands is easy enough, you just need to purchase the right material, get some tools, study the instructions and get to work.