Inflatable boat "Frigate 280": models, complete set

The inflatable boat "Frigate 280" is produced in St. Petersburg. Characterized by a U-shaped body with a hardened transom attached to which a small motor with a capacity of up to 5 liters is allowed. from.

The boat "Fregat 280" has undergone modernization and is now produced in models 280 E and 280 E mini. It is worthwhile to consider each of them in more detail in order to make the right choice.

Description of the case of the model of the rubber boat 280E

The case of the model "Frigate 280 E" is divided into two independent compartments. Cylinders are made in a rounded form, which contributes to correct differentiation when using an outboard motor and a small increase in the area of the cockpit (the interior space of the ship for the helmsman and passengers). For cylinders, five-layer PVC material is used - a product manufactured by Mehler Texnologies, a German concern, reinforced, resistant to salt water, oil and ultraviolet rays.

Welding of seams is carried out by hot air and is strengthened by additional PVC-overlays. In many, this technology causes caution. But this process is automatic and there is almost no marriage, unlike the use of rubber glue, after drying, the seams begin to diverge.

Completion of the model "Frigate 280 E"

The swimming device is equipped with a rigid pionol, made in the form of a book of four sections. The surface of the floor is not slippery, so you can safely climb and stand upright. This model of the boat is preferred by lovers of fishing for spinning, since it is more convenient for them to cast in standing position.

"Frigate 280 E" is found in two versions. One - with rigidly fixed banks (seats), which are inserted in the pasted fasteners; The other - with seats, mounted in the luster strips. The second option is more convenient, since the excess seat can be removed even when the product is inflated.

The 280 E model includes oars with pivoting oarlocks. By means of an adjusting collar it is possible to change their position. Instead of glued handles for carrying, which are present in most models, the "Frigate" boat is equipped with special cutouts located in the transom and used for the same purpose.

Necessarily in the complete set there are oars - 2 pieces, a rigid sitting - 2 pieces, a slate-book (differently - the bottom flooring). Additionally, a repair kit, a pump and an instruction manual can be attached to the boat.

Weight and size

The weight of the fully equipped "Frigate 280 E" boat is 24 kg. The product is packed in two bags, it is convenient enough to carry in hands and it is easy to place in the trunk of the car.

The size of the model 280 E is sufficient for the free location of two people, but the maximum carrying capacity of 240 kg is quite enough to transport four. Dimensions of a rubber boat along the length are 280 cm, width - 128 cm, height of the side - 34 cm.

With these parameters it is permitted to install a outboard motor, the power of which is not more than 5 liters. With. That allows you to move comfortably and quickly along rivers and lakes. The standard outboard motor is not included.

Model 280 E mini: description

The PVC boat "Frigate 280 E mini" was developed recently, in 2015. The model is light and reliable in operation, was invented for children who also like to be on the water and do not want to yield to adults.

In the boat "Frigate 280 E mini" the same technology of manufacturing cylinders as in the 280 E model is used. The body consists of strong reinforced PVC fabrics produced by Mehler. The use of this type of material is due to its safety, increased wear resistance and a long service life.

The production of a children's inflatable boat uses a bright color, for example red. This allows you to observe children from a long distance, keeping them constantly in sight. The seams are also welded using hot air technology, which guarantees increased reliability and durability of the swimming device.

Package, weight and size

Inside the body on the sides are fixed cast holders, used for rigid fixation of seats. The 280 E mini comes with an anchor eyebolt attached to the front of the boat, and belt belts placed on its sides.

The children's rubber boat "Frigate 280 E mini" is also equipped with two oars, two hard seats, a sland-book, a pump, a carrying bag and instructions.

The weight of this model is small, only 13 kg. "Frigate 280 E mini" has the following dimensions: length - 204 cm, width - 104 cm, side height - 28 cm. Capacity - 2 people; The maximum weight load is 180 kg. In this model, it is also possible to use an outboard motor with a power of not more than 0.7 liters. from. The motor is not included in the package.

The result

Inflatable boats "Fregat 280 E" and 280 E mini are suitable for any weather, as they are made of durable German PVC material. Model 280 E is suitable for fishing and hunting, it can safely stand in full growth. The model 280 E mini is designed specifically for children and does not imply its use by an adult, although two adults can carry it by weight. It is very convenient for teaching children to operate a mounted outboard motor.