Makita chainsaw DCS4610-40: description, technical specifications, instructions, reviews

Before choosing a chainsaw, you must decide for what purpose you acquire this tool. It is very important for such equipment, what loads will be on it. A semi-professional or professional unit is suitable for frequent operation, but if you intend to get the tool only from time to time, you can purchase a household model. The modern market today presents a huge variety of chainsaws, among others, one should pay attention to the products of Makita.

Until recently, such equipment could be found only in the arsenal of specialists, already today it can be purchased by every consumer. If you have a goal to save, you should pay special attention to household models. However, you should be prepared for the fact that they do not have all the options that professional models have.

If we are talking about household models, they are designed for 20 hours of operation per month, this is about 40 minutes a day. Semi-professional options are able to cope with almost any work, with their help it will be possible to cut down trees and carry out repair and construction work. Professional chainsaws are suitable for harvesting wood on an industrial scale. As one of the options described equipment can consider the chainsaw Makita DCS4610-40, which will be discussed in the article.

Description of Makita DCS4610-40

This chainsaw is an aggregate for long-term work in the garden and on the site. With the help of equipment, you can saw logs and harvest wood. The manufacturer supplied the device with a vibration reduction system , which makes operation more comfortable and less tedious. The model is equipped with an inertial brake circuit, complete with a 40-cm bus.

Specifications

The Makita DCS4610-40 chainsaw has an engine whose volume is 45.1 cm ³ . This household model is equipped with an oil tank of 0.25 liters. The power of the device is 2.3 liters. S, in kilowatts this value is 1.7. The device weighs 4.75 kg.

The width of the groove is 1.3 mm. In the device 56 links. The design is equipped with a spark plug Bosch WSR 6F. The length of the tire is 16 inches, the chain pitch is 3/8 inches. The equipment operates with noise within 101.2 dB. The fuel tank holds 0.37 liters.

Reviews about the model

Makita saws DCS4610-40, according to consumers, has many positive features, among them it should be noted:

• Reliable control;
• High level of security;
• Effective sawing.

As for reliability, it is provided with an additional handle, which not only improves the control during sawing, but also reduces the level of vibration. Safety is maintained at a high level, this is facilitated by a plastic guard and automatic circuit stopping system. The operator will be protected during operation if the chain is broken and the saw bounces.

It is important to remember also about effective sawing. This is facilitated by a 40-cm tire, which provides rapid opening of fairly large tree trunks. Chainsaw Makita DCS4610-40, according to consumers, is easy to maintain. It has an inertial brake circuit. Consumers like the lubrication of the chain automatically. Fuel is pumped for easy starting of the engine, which even a beginner will be able to handle.

User's manual

The Makita chain saw must be operated in accordance with the instructions that come with the kit. Having become acquainted with it, you can understand what safety measures can not be neglected. For example, equipment can be used to cut wood exclusively outside the premises. As for the amateur class, such devices can be used for cutting fine wood, felling trees, caring for fruit trees, shortening the length of trunks and pruning of branches.

Working with a saw requires great care. You can start the operation of the equipment if you are in a normal physical condition. The fire extinguisher must be in the workplace, which is especially true if you work around flammable plants. The operator should wear personal protective equipment, wear special clothes and shoes, as well as gloves. In the process of forestry work it is necessary to wear a protective helmet. Chain saw Makita works at a high noise level. Therefore, it is especially important to protect the hearing system from damage. To do this, it is recommended to use muffler or headphones.

Features of filling

Before filling the machine, it is necessary to switch off the engine. Use of open fire and smoking near is prohibited. Before refueling, the tool must be cooled. Fuel may contain substances that resemble solvents. Skin and eyes should be protected from exposure to such products. Spill oil and fuel can not. If this still happens, it is important to clean the saw. It is recommended to avoid contact of clothing with fuel. If this can not be avoided, then you need to immediately change clothes.

Do not refuel in the room. Fuel vapors may collect and constitute an explosive atmosphere. For oil and fuel, the necks after refueling must be tightly closed. Before turning on the saw, it is necessary to move away from the filling point for a minimum of 3 m. It is forbidden to store fuel unlimited time. It should be purchased in such quantity, which will be enough for use under the plan.

Recommendations for launching

Chainsaw Makita chainsaw should not be used if there is no one at a distance. It is important to make sure that someone is nearby. Before starting the equipment it is important to make sure that it works perfectly. The device must be operated in good condition. It is important to pay special attention to the operation of the brake, the reliability of attaching the brake lid, the correctness of the chain sharpening and the locking of the throttle lever. Handles should be clean and dry, which corresponds to safety regulations.

The saw must be started after its complete assembly and inspection. Makita DCS4610-40 chainsaw, the price of which is 12 460 rubles, must be held with both hands during operation. The right hand should hold on to the rear handle, while the left hand should be on the arc handle. After the gas lever has been released, the cutting chain still moves for some time, following the force of inertia. The saw must be held in such a way that the operator does not inhale the exhaust gases. In closed rooms, work with the device is prohibited, since there is a possibility of poisoning. If you notice any interruptions in the operation of the unit, it should be switched off immediately.

Cost of spare parts

No matter how good the equipment, it may need spare parts. Chainsaw Makita DCS4610-40 is no exception. You can buy a piston group for it for 3200 rubles. The piston pin will cost the consumer 1400 rubles, while the piston ring - at 732 rubles. The retaining ring is offered for sale at a price of 139 rubles., Bearing ball costs 1065 rubles.

Conclusion

Chain saw Makita DCS4610-40, reviews of which were presented above, can become a model of equipment that will suit you more than others. This device is a household appliance, therefore it is not so expensive and is affordable for most consumers. If you need a chainsaw, you should consider this model, evaluate its technical characteristics and capabilities.