Industrial sewing machines: overview, description, classes, characteristics and reviews

Industrial sewing machines are very different from household models. First of all it should be noted multifunctionality of shuttles. Depending on the type of construction, the belt and chain stitch devices are distinguished. Also, machines are divided according to the degree of automation.

The market is full of mechanical, and automated mechanisms. In a separate sub-group machine and semiautomatic machines are distinguished. In order to understand the devices in more detail, it is necessary to consider the existing classes of models.

Device classes

Various industrial sewing machines are on the market. Device classes help users know about the purpose of a particular modification. Single-head models are sold with the marking 24. Class 50 indicates that the device is suitable for flat-stitch sewing.

Two-threaded models have the designations 62. Class 70 indicates that the device is manufactured with combined screeds. The number 88 on the machine indicates the universality of the shuttle. These models are great for the atelier. For the purpose of flashing with a secret stitch, cars of class 90 are used. The designation 101 on the model indicates the presence of a vertical shuttle. These devices are suitable not only for hidden lines, but also for flashing lightning. Class 112 is given to machines that are designed for overlock stitches. Also there are models for direct firmware. This is class 130.

Brother B845 review

These industrial sewing machines are manufactured with two threaders. In this case, the user can adjust the stitches along the length. The shuttle in the device is located in a horizontal position. The engine is installed in an asynchronous type and has a power of 80 watts. The power consumption of the model is small. All standard bobbins are included. It is also important to note that the device is used for direct flashing. In total there are six paws for a hidden seam. Still, the model has a quality threader. On these industrial sewing machines prices fluctuate around 35 thousand rubles.

Reviews for Brother B530

This lockstitch industrial sewing machine reviews from buyers gets good. First of all it is important to note the quality of the shuttle mechanism. In total, it is designed to carry out ten programs. For direct flashing, the model can be used. However, its main task is edge winding. The needle threader is used for pumping.

Directly, the thread tensioning device is installed in the upper part of the housing. If we talk about the parameters, the power is at 88 watts. The embroidery speed is about 300 lines per minute. The bobbin in this case is regulated by a special handle. The model weighs a lot and is stable. For the firmware of the skin it does not fit uniquely. It is also important to note that the kit contains only three paws to choose from. Thus, it is difficult to make a secret seam using a typewriter. It is sold at a price of 41 thousand rubles.

Brother B780 Specifications

These industrial sewing machines are distinguished by a quality needle threader with a support. In total, the device uses two coils. If necessary, the bobbins can be changed quickly. A special device is used for thread tension. Suitable machine for decorative construction. In this case, the foot feed mechanism is located next to the needle threader.

The motor is used asynchronous type. A user can set a stitch for a maximum of 3 mm. The bobbin in this case is easily adjustable. This machine is sold in stores at a price of 32 thousand rubles. In various ateliers, it is very in demand.

JACK JK-781D Features

These industrial sewing machines are manufactured with a vertical shuttle. The length of the loop in this case can be changed. It is also important to note that the shuttle device allows you to perform more than six different stitches. Stitch maximum can be set to 4 mm. For direct fabric sewing, the model is poorly suited. First of all, it is important to mention a small set of legs. The bobbin pressure regulator is installed in a mechanical type. However, advantages include compactness and good stability.

If necessary, the presser foot can be changed quickly. The tissue feed rails are segment type. The embroidery speed of the model is quite large. The gasket is used very soft, working for the machine is quite comfortable. If you believe the customers, then problems with a secret seam are rare. It is also important to note that in the kit to the device the user can find a large set of needles that will be needed for work. Sold model at a price of 33 thousand rubles.

JACK JK-900D Reviews

This machine belongs to the class of budget devices. However, the quality of the parts is quite good. The shuttle is located in an upright position, and it fits for an overlay stitch. However, it should be noted shortcomings of the device. First of all, customers complain about a compact needle threader. Sometimes it breaks, because of which the thread has to be unraveled for a long time. Another problem lies in the small set of legs. Quickly change them during work will not work. The presser foot pressure regulator is installed in a mechanical type. With a large amount of work, this crane is uncomfortable. There is a model on the market of about 27 thousand rubles.

Consumer Reviews of JACK JK-210D

For the atelier this model is perfectly suitable, because it is made with replaceable paws. In total there are seven bobbins in the set. If necessary, the user can change the sewing speed of the fabric. The machine works on an induction motor. It is also important to note that the kit contains a large set of needles. A maximum of 4 mm can be set in the device.

For straight lines, the model is suitable. If necessary, the thread tension can be adjusted. There is not much pressure on the presser foot. A narrow lining is provided for fastening the thread. The force of the needle puncture is very simple to control. It is also important to note that the device uses a quality shuttle with a loop. The coil is mounted on a special support.

The system of automatic thread winding is provided for the model. If necessary, the user can turn off the reverse. The thread cutter is of a mechanical type. The gasket is applied rather strong, and wears out slowly. If we talk about shortcomings, it is important to note that this machine weighs a lot. The shuttle is set big. The power of the induction motor is 77 W. Sold model at a price of 33 thousand rubles.

JACK JK-133D Overview

This machine is very popular. A distinctive feature of the model is the high speed of the firmware of the fabric. The needle puncture force can be adjusted. For pulling the fabric a special rack is provided. For the purpose of flashing in different directions, the model fits perfectly. The feet for industrial sewing machines in the kit are included in various shapes. In this case, you can change them without problems. The pressure regulator is provided with a mechanical type.

Weigh the specified model exactly 8.5 kg. The gasket is made of rubber. For the finishing stitch the model is suitable. From disadvantages it is important to note a simple tension regulator. Rollers from him can occasionally seize. Also, buyers complain about the awkward handle for feeding the fabric. The machine is for sale at a price of 42 thousand rubles.

Customer Reviews for Typical GC 6150-H

The industrial sewing machine Typical GC 6150-H is manufactured with a horizontal shuttle. The needle threader is of the classical type. The pressure regulator is installed next to the engine. If you believe the feedback of customers, then with straight lines the problems are rare. The gasket on the working area is provided for a large width. All this allows you to sew the fabric in different directions. The needle puncture is easy to adjust. Felt gasket in this case is not provided. A stitch maximum can be set at 5 mm.

For overlock stitches, the model can be used. Also, it is suitable for overprinting. However, before buying, it is important to consider the shortcomings of the model. First of all they are connected with a loop. In this case, the coil is installed without a reverse. Thus, the needle threader sometimes works with scrolls. The power of the induction motor is only 64 W. Paws for hidden stitches are not included. In total there are two bobbins in the set. For reinforced stitching, the model does not fit uniquely. However, you should consider the low price of the goods. On "Avito" industrial sewing machines Typical GC 6150-H are sold for 26 thousand rubles.

Cars of the company "Juki"

Industrial sewing machines "Juki", as a rule, are produced with asynchronous motors. Also on the market are devices with servomotors. Their distinctive feature is the presence of foot pedals. Shuttles in devices are located in a horizontal position. For straight lines, machines are ideal. Also worth noting is the reasonable price for the model. On average, the machine will cost the user around 40 thousand rubles.

Types of machines "Juki"

By degree of automation, mechanical as well as automated devices are manufactured. Reverses are used for rocking and rotary type. Platforms can be flat, cylindrical or U-shaped. Also, the division takes place as intended. In stores are represented loop, combined and differential devices.

Reviews of Juki CP-180D

These industrial Juki sewing machines are very popular due to their wide working platform. The reverse is provided for them with a swinging shuttle. For straight lines, the model fits well. If you believe the customers, then the threader problems are rare. The firmware speed in this case can be adjusted using the knob. The paws in the kit are quite strong, they break only rarely. It is also important to note the quality of bobbins. The tension regulator is used with a roller mechanism. The thread feed rail is of the segment type. Above the motor is a special felt pad.

The model is not very loud. If necessary, the tensioner can be removed. A separate foot is used for the fabric. The loop is suitable for winding work in this case. However, there are shortcomings in the device. According to buyers, the model has an inconvenient quilting stand. The overlap foot is short. Also, the model does not have a free sleeve. To carry the shuttle there is no handle.

Reviews of Juki LBH-780 U

These industrial sewing machines Juki are in demand even in prestigious ateliers. The shuttle in them is used in a combined type. For overlock stitch the model fits perfectly. Also, the wide foot allows you to perform over-lapping work. Problems with the loop in the user are rare. The needle threader is used with a shield.

The lining is installed on the working surface. The tissue feed rails are of the segment type. A separate foot is used for straight flashing. The concealed seam can be made with a bobbin. The machine weighs exactly 8.4 kg. The thread tension regulator is provided with an automated type. The presser foot pressure can be adjusted from the panel.

The thread cutter is of the classical type. The stand itself is made of plastic for it. To configure the loop, a separate rack is used. The bobbin winding is automatic. For sewing in different directions, the model can be applied. Buy this machine user can for 47 thousand rubles.