How to sew a T-shirt beautiful and fashionable by yourself.

Knitted things took their rightful place in every wardrobe. Special preference for women of all ages give T-shirts. This garment can be bought in any store, market or shopping center. But if you want a truly exclusive thing, you need to know how to sew a T-shirt with your own hands. This activity is very exciting and will require a little imagination and small skills of needlework from you.

How to sew a T-shirt out of jersey with a deflated shoulder line.

To make a simple model, you need a cut of knitted fabric, a thread of a suitable tone, an overlock and a sewing machine. Before you sew a T-shirt, you need to make a pattern on paper. It will take several measurements. We need data on the volume of the chest, waist, hips and the length of the finished product.

On the sheet of paper we draw a rectangle, the sides of which correspond to the length of the article and the girth of the chest. Add on all sides to 4 centimeters for a free fit. If the chest girth is smaller than the thigh, then expand the bottom of the rectangle by the desired amount of centimeters. Slightly weave the pattern, drawing smooth lines at the waist level. Cut out the received pattern of the T-shirt and fold it in half. Draw the desired line of the neck and cut.

The cut of the knitted fabric is folded in half, directing the columns of threads from top to bottom. We impose a ready-made pattern and fix the sewing needles. Cut out the parts, then remove the needles and remove the pattern. Do not forget to add 1.5 centimeters to the seams and 4 centimeters to process the bottom. We measure 20 centimeters on the side cut from the shoulder and put a mark. This will arm arm.

Using overlock we sew shoulder and side seams. If necessary, leave the side cuts below. In this case, we process 10 centimeters of the lower part of the side seams separately. Next, bend the inside in a centimeter of tissue in the neck, side incisions and armholes and baste. The bottom of the product is bent to 2.5-3 centimeters and also fixed.

Now we need a sewing machine with a double needle. Laying T-shirt face up, lay a finishing double stitch on all the bent parts of the product. Our new thing is ready. Ottyuzhivaem ready T-shirt and wear with pleasure.

How to sew a T-shirt with insets of guipure or other elastic material.

The manufacturing process of this model is slightly more complicated than the previous one. In this case, use the ready-made pattern of a simple T-shirt from Burda magazine. On the pattern we put the lines of the supposed inserts and cut the shelf and the backrest along the drawn labels. Remember that for a good fit of the finished product, the joints of the individual elements of the pattern must have straight slices. On each side of all parts of the pattern add 1.5 cm to the seams.

Before sewing a T-shirt, it will be necessary to assemble a separate piece of the shelf and back. All the joints are done on the overlock. After that, iron the assembled parts and only then fold them with the front sides inward and sew the shoulder seams. If your model assumes the presence of sleeves, then first sew them, and only after that we sew off the side seam, simultaneously connecting the sleeve.

We lower the bottom of the product, the sleeves and the neck. We fix the tissue with needles. We sew and finish the finished product well.

To sew a T-shirt that will not be like all the suggested options in the outlets, connect the fantasy. A special combination of several elastic fabrics, decorative decoration with flaps, appliqués, prints, rhinestones, beads or sequins will give your product a special style and personality. Using guipure will help to emphasize the smooth curves of the figure and the special femininity.