How to replace the VAZ-2109 fuse block?

Some motorists call the fuse box a "black box" because of the characteristic construction. But despite this name, this part can easily break down. Most often such a trauma is pursued by domestic cars such as "VAZ-2109". Reviews and full information on replacing the fuse block you will learn right now.

Where is he located in the "nine"?

This part is located on the left side just below the steering wheel. The fuse block ("VAZ-2109") performs the function of protecting the electrical part of the machine from sudden mechanical damage.

When this spare part can burn?

This happens quite often in the owners of domestic VAZ. And the main reasons are that the mounting block is not able to withstand the additional load in the form of simultaneously switched headlights and radio tape recorder. Even such an insignificant at first glance condition can provoke a strong overheating of the system, thereby causing a rupture of the entire electrical circuit. Therefore, if an electrician suddenly stops working on your machine, then the problem lies in the fuses.

How to make a replacement?

If the VAZ-2109 fuse block has a property to often break, respectively, each driver should know how to repair and replace it. With the last moment, we'll figure it out now. So, in order to replace the fuse block ("VAZ-2109"), you need to prepare only two tools: a flat and a cross screwdriver.

After preparing the tools, you can safely get down to work. First, you need to disconnect the battery terminal (minus), then remove the cover of the mounting block. In order to do this, you need to rotate 90 degrees 3 locks or simply unscrew the bolts that fasten the cover in the "VAZ-2109". The technical characteristics of this element are very vulnerable to mechanical damage, so you need to do everything very carefully, so as not to break the special clamps. If they are deformed, then you can not avoid buying a new cover.

After this stage, go to the very fuse block. To remove it, you need to unscrew the bolts securing this part to the front panel. Next, you need to carefully move the fuse block "VAZ-2109" from the studs of the bracket. But the process of dismantling does not end there. "Nine" has also an additional relay with fuses, which is also located near the steering wheel, only on the right side. In order to remove it, you need to take the key to 8 and the cross-head screwdriver. Then you must dismantle the floor covering by unplugging the wires from the electronic control unit. Use the key to unscrew all the fasteners and then remove the additional relay. And only after that it is possible to remove the main fuse block. Everything, at this stage, the process of removing the part is complete. Install the new unit in the reverse order.

And finally I would like to note a very important point: when removing the fasteners, it is desirable to mark all the bolts and nuts, so as not to waste time searching for them.