How to put the tiles correctly by modern standards

Tiles - this is a good facing material, but the work on its laying is traditionally quite expensive, which many simply can not afford. You can save the precious family budget . And then the question arises: how to put the tile correctly? It is necessary to understand.

Laying tiles is a very laborious work, which requires scrupulousness and maximum accuracy. If at the initial stage to admit at least some inaccuracy, this will greatly affect the result of all work. So, let's figure out how to put the tile correctly.

To work you will need a very specific set of tools: a construction mixer, a hydraulic level, a notched trowel, a tile cutter, a small Bulgarian with a diamond circle. Materials required for work: tile, glue, grout, remote wedges and crosses.

Tiles are laid on a pre-prepared surface, which should be perfectly even. The surface is required to get rid of dust, and then thoroughly primed. If you want to polish both the floor and the walls, you should first treat the walls, as this will protect the tile on the floor from excess contaminants. From the floor surface, it is necessary to retreat a distance that is equal to the thickness of the tile with the glue, and also leave space for the expansion joint. It is best to use for this reike. It will not allow the tile to crawl under the generated load.

If we talk about how to properly lay the tile, then first you need to mix the glue. The solution must be ductile, but not liquid. After that, it should stand for about five minutes to ripen, and then it needs to be stirred again. Next, you need to pick up the tile and determine the direction of its placement. For this, there are arrows on its back side. All of them should be directed in one direction. The smooth surface of the notched trowel is used to apply glue to the surface of each tile, and the gear surface to remove the residue. The spatula should be kept perpendicular to the surface so that the ridges are of equal height.

Talking about how correctly put the tile, it is worth saying that then it must be installed in place, and then pressed against the wall by tapping lightly on its surface. Also all the following tiles are mounted, and the level is used to monitor their position relative to the vertical and horizontal directions, as well as the stay of all the elements in one plane. If there are minor deviations, they can be corrected by simultaneously pressing several fragments at a long level. In the spaces between the tiles, remote crosses must be installed.

The remaining rows are stacked in a similar manner, and all the intersections of the seams are supplied with crosses to obtain the formation of clear, even lines.

If we talk about how to put ceramic tiles correctly, then this is done in a similar way, only with the amendment to the fact that all work is done on the floor. Near the walls of the tiles neatly dive under the already pasted on the walls. This allows you to get a smooth seam around the perimeter.

If we talk about how to properly lay the tile, it is worth noting that a few days after the work is grouting joints. They need to be cleaned of dust and adhesive residues, and then rub the compound with a rubber spatula. The day after this, you can wash the tile.