How to match a lace blouse with knitting needles? Secrets of needlewomen

Knitted things are so refined and cozy that they can not be replaced by any other clothing. Confirmation of this is a lace blouse. Spokes she tied or crocheted - it does not matter, in any case it will be very feminine and original. It combines romanticism, and tenderness, and sensuality. And if this is a manual work, then it has a soul and is priceless.

Before you begin to work, you need to decide on the model, threads and spokes. It is especially important that they fit each other in diameter. On the labels of skeins usually write recommendations for choosing spokes. How to fit a lace blouse with knitting needles, which pattern of the pattern will fit the yarn and what is the best choice for the model? Consider everything in order.

Calculation and commencement of work

Such a thing will look good if you choose thin threads, and they can be either with a pile or without it. Before tying the loops for the front panel of the sweater, you need to calculate how many of them are needed. This issue becomes irrelevant only if the openwork blouse knits with a clear instruction with an accurate selection of recommended threads. But if you knit from yarn of a different thickness, then you must make a sample.

So, how does an openwork blouse knit with knitting needles and how to calculate the loops? First of all, we take the pattern outline and unfasten one rapport of the main drawing. Next, we measure it and, based on measurements of the chest and hip circumference (consider for a larger value), we determine what number of loops to dial. For this, the half-miter is divided by the size of the rapport sample and rounded to an integer. Thus we get a number of rapports for the front and back cloths. The openwork blouse knits easily enough, although this process contains some calculations. To create a thing you can use any pattern you like.

A sweater can also be knitted from a thick thread, but it is better for him to give preference to simpler drawings and narrow rapports. Beautiful look "holey" sweaters made of mohair or angora. And despite their loose binding, they come out very warm. An openwork blouse crochet on the same principle: first - a sample and calculation; After - a set of air loops by volume.

The process of knitting

At the bottom of the product is often tied a strip of rubber. However, in a large number of models it is not provided. In this case, the work begins immediately with the basic pattern.

Openwork blouse knitting on the fragments: the front panel, back and two sleeves. The first two parts are knitted separately, each of them - in a straight line to the armhole, then form a cutout for the sleeve on both sides. At the neck, the loops begin to decrease according to the rollout of the selected model.

Above the sleeves work simultaneously to make them as symmetrical as possible. Knitting starts with a small number of loops equal to the volume of the wrist, then make increments along the edges through the same number of rows. When the sleeve "reaches" to the height of the armhole, the decoration of the pellet begins, closing several loops around the edges on both sides.

Modeling in knitting

An openwork blouse can be made only with some fragments of patterns running along or across the front cloth, or it is completely connected by an interesting loose pattern. Ornament can be finished only the neck of the product or only the sleeve. Beautifully look patterned sweaters on the buttons along the entire length or just near the neck. Whatever the model, the main thing is that she likes her mistress and emphasizes all the virtues of the female silhouette.