How to make a poncho with your own hands? The two easiest options

Do you consider yourself to be a fashionista and want to look extravagant? Then you need to have in your wardrobe unusual toilet items. For example, make yourself an original poncho with your own hands. This article offers two simple ways to tailor this product.

Preliminary calculations for the manufacture of a rectangular cape on the shoulders

The work is very simple. In order to make a poncho with your own hands, you must first make calculations to obtain a drawing pattern. Take a centimeter tape and any object of your clothes with a long sleeve, for example, a jumper or a wide blouson. Spread the sample on a flat surface, pointing the sleeves to the sides as much as possible perpendicular to the shelves. Then, note the places where the sleeve should last "three quarters" long. Arrange the ribbon between two points, as close as possible to the shoulder level. The resulting figure will be equal to the width of the future cape. If you want to make a poncho with your own hands not too wide, then reduce this figure to the desired size. The length can also fluctuate in a wide range. Thin and light products are usually short enough - at or slightly above the waist line. Winter versions of the type of vests, as a rule, cover the hips.

Step-by-step description of knitting a rectangular poncho

Consider the option of making a cape size 48-50 with knitting needles. Its width will be 95-100 cm. For tying out, type 180-200 loops, using the spokes number 3-3,5. It's also very nice to look like a crocheted poncho with your own hands. Patterns prepared in advance will help to more accurately calculate the loops. To do this, usually cut the segment according to the rapport of the figure, and then make the necessary calculations, based on the figures of the drawing. So, after starting work, move straight to the height of the product 50-55 cm. Then, by dividing the total number of loops into two equal parts, begin to lower the loops in the middle, making out a hole for the head. Its width should be in the finished form 22-25 cm. After reaching the desired size, begin the increments on both sides to connect the two canvases into one. Its width will be equal to the original value before the descent to the neck. Continue the work by tying the canvas of the required length. The hole in the product can be trimmed with a high collar or several rows of knitting (spokes, crochets) in a circle. Pass the string, imitating the waist, at the waist level. The Cape is ready!

How to make a triangular poncho with your own hands?

This cape is more versatile. To do this, you do not need to build a pattern and make preliminary calculations. In addition to untying, you can sew a poncho with your own hands from a dense fabric or knitted fabric. To do this, you need to find two identical rectangles. Their width will be equal to the distance from the point of the beginning of the shoulder near the neck to the elbow joint. And the length of the workpiece will be proportional to the narrow part in a double size. Arrange these two canvases according to the proposed scheme. The first stage of the connection is indicated by a large arrow. Beautifully decorate the seam, for example, gently decorating it with finishing tape. The second stage is indicated by two dashed lines. Process the seam in the same way. Connecting the product according to the scheme, you get a two-layered triangular canvas with a hole in the middle for the head. Decoration of the neck and the edges of the poncho can be made with the same braid that has already been used.

Fantasize and get unique products made with your own hands!