How to make a garage for your own hands?

The furnace for the garage should be small in size, powerful enough and at the same time economical, and also omnivorous - in order to burn all sorts of garbage in it. And meanwhile before many motorists often there is a question on where to put used oil. It is a product with a rather high combustion temperature. It burns not the oil itself, but the vapors released by it during boiling. There are various options for stoves burning waste oil as a fuel.

The basic design of the waste oil garage

For example, a garage oven, which you can easily make with your own hands, is offered the following design (quite efficient and economical), which can heat the garage, burning waste oil. The essence of this design is that in a sealed container, pairs of boiling oil are burnt. To make a garage for a garage, you need to take a fairly thick metal, a thickness of 4 to 6mm, as the temperature will reach 700 - 900 ° C.

The design is two tanks connected by a pipe. The smoke extraction pipe must be at least 4 m and be made of galvanized steel to withstand a temperature of about 250 ° C. The lower tank should have a volume of no more than 15 liters to provide combustion for 15 hours, since the rate of burning for 1 hour is 0.5 to 1 liter. In the lower part of the tank, a hole is made with a lid for filling the oil and adjusting the air flow. In the upper part, the exhaust pipe will be installed. The upper tank is in this structure both a heating element and a furnace.

An important detail is a thick-walled pipe with a diameter of 360 mm, which connects both tanks. It drills 8 holes in a circle with a 9mm drill. Such holes are made of 6 rows, that is, there must be 48 holes in all. In order to flood this furnace, you need to pour a liter of working through the hole for pouring into the bottom container and set it on fire set on paper or rags. After about 10 minutes, the fire will warm up the workings and the tank itself, and the combustion will pass into the pipe. Such a furnace for the garage on the working-up quickly warms up the room. Almost the same looks like an industrial version, running on waste oil. Another version of the same design is proposed, but with a fan for air pressurization, Which raises the temperature of combustion, and the waste oil burns without soot and soot.

Advantages and disadvantages

In fact, a garage oven made and running on waste oil is the most acceptable option. First, it is easy to operate. Temperature control is performed by moving the cover of the oil and air supply port. Secondly, it is economically advantageous, since as a fuel, what is generally needed is thrown away, it is only incomprehensible - where. Thirdly, it can be considered quite environmentally friendly. Since there is no smoke in the room, there will not be smoke from the exhaust pipe either.

The furnace for the garage also has disadvantages: the chimney must be not less than 4 meters; The chimney should not have horizontal sections; Capacity and chimney must be cleaned weekly.