Homeliness, Do it yourself
How to make a frame for a picture with your own hands
A frame for any painting today can easily be purchased at a nearby store. And it does not matter why you are looking for a frame: for a painted picture, embroidery, children's drawing or photo collage. However, some masters believe that a good picture requires a special frame. Therefore, it is best to make it yourself. And the question "how to make a frame for a picture with your own hands" should be approached with all responsibility.
Frame for canvas can be made at home. To produce it you will need the following material: a baguette or interior molding with a width of more than twenty millimeters, wooden bars of the same section, a construction stapler, superglue and a tape measure.
How to make a frame for painting on canvas
First you need to take measurements from the picture and, cutting the ends of the bars at an angle of 45 degrees, cut them into the necessary pieces. Between each other, the bars are fastened with a stapler and a superglue. It is important that the picture entered the stretcher exactly, without any distortions and gaps. Next, you need to make a framing frame. To do this, you need to glue the baguette or molding onto the wooden frame. Finishing material should completely hide the frame and protrude at least one centimeter from the outside.
To install a picture in this frame, you need to attach it to the wooden frame with a construction stapler. If the size of the picture is more than 40 centimeters in one of the sides, it will be necessary to make additional holders. Often they are made from plastic bottles and fastened with a stapler to the inside of the frame's wooden frame. When inserting a canvas, do not forget to attach it to the stretcher.
How to make a picture frame with your own hands from paper
How to make a frame for a painting with your own hands: ideas for finishing
For the manufacture and design of such products, you can use any improvised materials: from pieces of lace to construction moldings. Lace well finish wooden frames, for this, pieces of material are glued in an arbitrary order with PVA glue. After coating with varnish, this composition acquires an exquisite form of colonial style.
Using gypsum ceiling moldings, you can get an equally interesting frame. With this material it is very easy to work, and if you paint the stucco with black paint first, and then add smears of bronze and gold - you will get an excellent frame in antique style.
Similar articles
Trending Now