Homeliness, Repairs
How to glue linoleum back to back at home: methods, tools, technology
Despite the development of technology and materials, linoleum has been and remains the most popular floor covering. This material for many years has proven itself as an excellent floor covering for commercial premises and offices, as well as for ordinary apartments or houses.
This material can be quickly and efficiently laid, capturing a large area in a minimal amount of time. If the room is repaired, the linoleum is also quickly removed. This coating is easy to clean, withstand heavy wear and does not lose its beautiful appearance. Today you can buy types of linoleum, imitating different textures. Also offered a wide range of colors.
During the Soviet Union, this material was produced in fixed sizes with a width of 1.5 m. Today, the choice of measurements is more - you can purchase a cover with a width of 3 and even 5 meters. Despite this, it is often necessary to glue together two pieces of material. Many would like to know how to glue the linoleum back to back at home. Let's consider several technologies.
Why, when and why is it necessary to glue the joints of linoleum?
This floor covering is very hygienic and mobile enough in the question of replacement. Often it is used for finishing floors in kitchens and corridors - these are the places where it is required to clean up very often. Also these rooms are places with a high level of humidity and differ sharp temperature changes. The interiors of the apartments in the houses of the old building and the layout of the rooms make it necessary to glue the joints of the linoleum.
Technologies for bonding linoleum
There are two options. So, you can apply cold welding, which is applied with the help of special glue compositions, or hot option - here a special cord with a hairdryer solder joints between each other. In addition, there are additional subspecies. For example, there is nothing easier, how to glue linoleum on the floor on a double-sided scotch.
Hot way
With this technology, linoleum joints are glued in commercial premises. There is a need for special equipment for welding. Also you need a special cord. Instead of welding equipment, you can apply thermofan.
So, in the place of joints lay the cord. The width of the laying should be 2-3 mm. Then using a hair dryer, which was preheated to 500 degrees, the wires are simply soldered to the surface of the linoleum. It should be borne in mind that one cord should not be longer than half of the soldered part. The second piece of cord is put on soldered with a small margin of 2-3 cm.
High temperatures allow maximum quality and hermetic soldering of the cord material into linoleum. To remove it, experts prefer to use a special tool for gluing linoleum.
Cold welding
This is a great way to perform the operation of gluing the joints with your own hands. Cold welding is often used in everyday life and is considered very popular for such tasks. Why is the process called cold welding? It is carried out by gluing the floor covering with an inexpensive adhesive for linoleum without the need for "violence" over the material with high temperatures.
How to glue a linoleum to butt by cold welding
Its edges should be cut as accurately as possible and evenly. Then they are superimposed on each other so that one joint covers the other about 3 cm. It is important that they are clean and dry. Before you glue the linoleum on the floor, you need to apply a paper tape on the material - it will reliably protect the decorative surface from the aggressive effects of the adhesive. It also serves as a label for the gluing zone. Scotch tape is applied not only to the upper, but also to the lower part.
Then, the lower and upper strip of the floor material is simultaneously cut off. Remain the remaining trimming. Then both are rolled together with a special roller at the junction point so as to align in one level.
Cold welding faults
Cold welding is a very effective adhesive, but it should not be used on linoleums that have a soft base or a heater. In this case, the glue will not help to achieve the most accurate docking. The stitches will be very noticeable, and their appearance will become unaesthetic.
Selection of glue
In the process of using cold welding, everything depends on the materials that are glued together. There are several types for different situations:
- The glue "A" has a liquid form and is suitable for working with hard linoleum.
- Glue "C". It creates a special layer on the weld surface and is used for bonding joints up to 4 mm thick.
- Glue "T" can be glued polyester materials.
Required Tools
Let's look at what tools you might need. Selection is based on the type of linoleum. To work on hot technology, you will need scissors and a trowel for smooth cutting. Next, to apply the material, it is necessary to prepare a spatula, brush or roller.
Advised by professionals
The needle from the container with adhesive during cold welding should be fed as deep as possible into the seam.
Apparently, the procedure is simple and accessible for everyone. As a result, the flooring will take on a beautiful aesthetic appearance. There's nothing better than a well-laid linoleum. Gluing joints will give the floor covering an even more aesthetic look.
Similar articles
Trending Now