Correct dismantling of floors by own hands

Competent and correct repair always begins with dismantling works. If the flooring is to be renewed during the renovation, then the dismantling of the floors is the first operation. But it's important to do it right. The durability and quality of the new flooring depend on this.

We dismantle the concrete foundation - the main points

If the concrete floor is in an unsatisfactory state, then the best way is to dismantle it. This may be necessary if the coupler is stratified or cracked. Dismantling work will cost much less than repairing the base. To remove the old concrete floor, you can apply impact, drilling or cutting.

Screw - what is it?

Concrete screed is an element of the floor, which is the basis for flooring. Screed is used for strengthening, as well as for leveling. Apply this method in a variety of buildings, as well as in apartments. Concrete bases are so popular because of their properties. It is durable, resistant to moisture, non-flammable and very durable coating.

When to dismantle concrete floors

The removal of concrete bases is resorted to for various reasons. So, sometimes under the floor are various communications that need to be repaired or replaced. Also remove the cover if you want to lower the floor level. Dismantling is the best way out if concrete has started to break down.

Dismantling of concrete floor: technology

This process is quite laborious, but having done it yourself, you can save a lot. This service is very expensive for professional builders.

Before starting work, it should be reported that the process will require considerable physical effort. It is necessary to destroy a heavy enough monolithic plate. The process will be accompanied by powerful noise effects, so you should warn the neighbors in advance that the apartment will be dismantling the floors. Also it is necessary to take into account garbage.

Required Tools

For destruction, some tools and materials will be needed. The first thing is worth buying, and it is better to rent a cutter. A special disc will easily cut both concrete and reinforcement, if necessary. It is not superfluous to be a jackhammer or a puncher. For manual work it is better to use a heavy hammer, scrap, hammer.

Do not forget about personal protective equipment. Experts recommend working with gloves, a respirator and earplugs. All this will help to avoid unnecessary injuries. Also it is necessary to prepare in advance consumables - disks for the cutter of seams and nozzles for the perforator.

Let's get to work

Dismantling of floors can be done by different technologies. The choice of a particular method depends only on how the basis was made. For example, dismantling work on cement or concrete can be carried out using shock technology, but its effectiveness will be low if there is an armature in the screed.

To destroy the reinforced base, the best choice is to use a cutter. It's easier and cheaper to remove the dry screed - it's just sorted out into parts. In general, the dismantling of the sexes is the gradual chipping of the pieces of the old floor and picking them up in sacks for later removal.

We destroy floors from a tree

Wood is a popular material for the arrangement of the coating. Wooden floors are safe, however, unfortunately, are far from eternal. If the basis has been established by all rules, then it can be used for more than 50 years. But sometimes you want a major repair, and then you need to dismantle the old floor.

Preparatory work

Dismantling work can be done completely independently. When planning such actions, it is necessary to understand that, as in the case of a concrete floor, the process will turn out to be quite noisy. There will also be a lot of debris and dust. Dust will settle even on the ceiling - that's why you should wear protective clothing.

Required Tools

So, for destructive work it is necessary to prepare a hammer, mites, naildrivers, screwdrivers, as well as an ax and a small scrap. For sawing boards, an electric jigsaw is useful. Let's look at how the wooden floor is dismantled by our own hands.

First of all, the room is completely cleaned of anything that can interfere. Then remove the old plinth, then the ventilation grilles. Next, the upper floor covering is removed, and after - the rough floor. Now the room is cleaned as cleanly as possible. It is best if the cleaning is damp.

The work plan can be different. It depends on whether you need the dismantled materials in the future. If the floor goes into the garbage, then with the help of a nail, an ax and a crowbar, the process can be completed very, very quickly. The skirting board is easily pushed by a nailhead, then comes off. After that, the turn comes to the boards - they are torn off at the attachment points. Do not work too carefully - everything that is removed, then it will be recycled.

So, with some effort, you can remove old floors. In their place, new, made by modern technologies, will arise. And the newest floor coverings decorate any interior.