How to do on the skateboard "Ollie": the trick technique

In the summer, all the teenagers go out into the streets, gathering large companies to have a good time. Certain conversations for a decent rest, of course, will not be enough, so in parks you can see a lot of scooters, rollers, skateboards, through which all sorts of tricks are carried out. Quite a lot of people know how to do the "Ollie" on the skateboard. For beginners in this business there are many difficulties.

A beginner skateboarder must first learn to stand well on the board, and only then start to study various tricks. The article will tell you how to do "ollie" on a skateboard - the basic trick that all skateboard and fingerboard owners should learn to do. Once such a combination is mastered, other tricks will immediately become available, because they are based on the "ollie".

Ollie's trick

Before theoretically learning how to make an "alley" on a skateboard for beginners, it is necessary to understand what the trick is itself. At its performance the skateboarder rises in air together with a board, at all without using hands. At first glance, it's unlikely that newcomers will understand how to make an "ollie" on the skateboard, which makes an impression on everyone around.

Already in 1978, Alan Gelfand was able to make a jump in the ramp, not using his hands, but working only with the body and legs. This is how the first "Ollie" appeared. And the first street trick was shown by a skateboarder named Rodney Mullen in 1983.

The high trick of the "ollie" looks very beautiful and interesting, that's why every novice aspires to learn how to do it as quickly as possible. The technique of performing a jump exists alone, but each person can slightly change it by placing legs wider or narrower.

Below is detailed about how to do "ollie" on a skateboard for beginners. It is clear that simply so it will not be possible to fulfill it. For a successful trick, you need to learn the theory and do everything in accordance with it.

Overclocking

The first step in performing the basic trick is overclocking. Before you do on the skateboard "Ollie", you need to accelerate a bit, because as you go the jump is much easier than with the place.

The leading leg should be placed in the middle of the board or slightly moved to the front bolts. The second leg (jogging) is required to be placed on the tail section of the deck. Finding a comfortable position, you should slightly bend your knees. When the legs get used to such a pose, you need to concentrate and get ready for the jump.

Click

The most important point, without which the trick can not be done in any way, is called a click. It is a sharp jerk or pushing the feet behind them to the tail of the board (teil). This movement must necessarily be sharp, otherwise the skateboard will not be able to rise into the air.

As soon as the sharp pressure is made, the skater starts to rise together with his board, quickly pushing away from the surface of the earth. This movement is very much like a normal jump on one leg.

It is necessary to push off with a solely jogging leg (the one that is on the tail part of the board). The driving leg, located in the middle of the deck or near the front bolts, should carry out the pulling movement, which is described below.

With proper performance of all actions, the nasal part of the skateboard will rush upward. It is at the second stage that it is necessary to understand that the height of the subsequent jump depends on the click force. But you should be careful when pressing the back foot onto the end of the board, so as not to accidentally break your own vehicle.

Extractor hood

At first glance it seems that the most difficult movement is a click, but in fact the future trick depends not only on him, but also on the hood, and, consequently, the third stage will not be easy.

When the front of the skateboard is pointing upwards, and the tail is torn from the ground, you need to start pulling out your board. A draft is called the second most important element of the "ollie" trick. The combination is an upward-forward movement, which is carried out by the inside of the foot of the front (i.e., leading) foot on the fluke (upper cover) of the skateboard.

It is due to this movement that the skateboard and its "driver" will rise into the air. Without drawing it will not be possible to make an "ollie". If you correctly click and climb high into the air, but without pulling the board with the leading leg, you can simply break the skateboard when landing to the ground, because the fragile deck will not withstand the collision with a solid surface.

Flight and Landing

The final step, which brings the skateboarder closer to a full performance of the trick, is a landing. It should be mastered already after it turned out to do the right click and pull out the board.

Each owner of this vehicle dreams of dispersal faster than the wind, a sharp click, drawing and hovering in the air. This picture looks especially good if the jump is made through a twenty-span span. All this looks, of course, cool, but without knowing how to land properly, the extraordinary steepness can easily turn into a broken board, broken ligaments, fractures, cracks, tucked up feet and other troubles.

In fact, in the landing on the ground there is absolutely nothing complicated. You just need to place your feet in the area of the bolts, which will reduce the chances of breaking the board in half. In addition, during the flight you need to control your center of gravity - it's best to transfer it to the center of the skateboard. In this case, you do not need to deflect the body body forward or backward, because in this situation the board can fly out from under the feet.

Conclusion

It should be understood that before you do on the skateboard "olly", you need to mentally prepare yourself for failure. From the first time to make a jump it turns out rather rarely, so many beginners with each new attempt earn additional abrasions, traumas and so on, but together with them they acquire experience too.

The only good way to do "olly" is to try and try, even if you can not do it from the tenth time. The longer the practice, the faster it will be possible to learn new tricks.

Now that you know how to do the trick of "ollie" on a skateboard, do not hesitate - it's time to start practicing!