How to disassemble the tablet of the following manufacturers: Asus, Texet, DNS, Explay, Prestigio, Acer and Oysters

If you have a question about how to disassemble the tablet, but you are almost not familiar with modern technology and have never seen its interior before, do not do it on a fully functioning device. Even if something does not work, or you become very interested, but you almost do not understand it, then it will be more correct to refer the device to specialists. The fact is that modern electronics has a very complex device, and at the same time it is quite fragile in itself. That's why sometimes it happens that as a result of unprofessional and unsuccessful disassembly even specialists can not return the gadget to life.

How to disassemble the tablet: general instructions

It is worth noting that for carrying out such an operation you will need to arm yourself with special tools. In any electronics store or even on the market, they are easy to find. Before you disassemble the tablet, you must prepare a set of thin screwdrivers, which include straight and cross, as well as tweezers and a metal spatula. In some cases, you may also need a hex screwdriver, although such screws are not so common on the tablets, it should be prepared so that it does not need to be looked for when the machine is already at the disassembly stage.

The main stages of work

It is clear that it is difficult to describe in detail how all tablets are being disassembled, but there are several main stages of work.

Start

The first stage of work with almost any model of the tablet requires you to detach the display panel from the back cover. Depending on the manufacturer and the brand, screws or special fasteners may be used to connect them. Most often, there are no screws, but before you disassemble the tablet Texet, you will not only have to unscrew a few screws, but also snap off the special latches. And then you can walk around the perimeter of the display, poddevaya it through a metal blade. It must be done carefully at intervals of small size so as not to damage the display, and also to carefully detach it from the back cover.

Next step

If you talk about how to disassemble the tablet, you should continue. The second stage for most models involves disconnecting the cables, after which you can remove the battery. All these manipulations you must perform with the utmost care. If you do everything correctly, then all fasteners and parts should be disconnected as easily as possible. Take care not to accidentally leave the twisted screws, which are sometimes hidden, for example, under sealing gaskets or protective films.

When the battery is disconnected, you can proceed with the subsequent disassembly. This step requires the following actions from you: remove the speakers, disconnect the camera, if possible, and also unplug all available loops from the system board of the device. Now you can unscrew the system board, which is usually attached around the perimeter by means of special screws.

We disassemble a tablet of Chinese manufacture

It is not a secret for anyone that the majority of tablets are produced in China. It is clear that such products are out of order quite often, and tablet computers are hardly an exception in this regard. There can be a huge number of problems: the screen is broken, which needs to be replaced, the touchscreen refused to work, the sound disappears and so on. And immediately the question arises as to how to disassemble the tablet? Not all owners of such devices agree to carry them for repairs, but decide to repair themselves.

The subtleties of the process

Usually, the process of parsing such devices is not particularly difficult. You must arm yourself with a small screwdriver, find the bolts and get to work. Usually the tablet consists of a cover and the tablet itself. After unscrewing the bolts, the lid is removed. Usually fasteners are kept well enough, so you should try to remove the lid. You can use the plastic card that you want to insert into the slot, and then hold it around the device, which will make it easy to separate the cover.

You should show maximum accuracy, because the speaker can be attached to the cover, because of what you can tear off the wire. In addition to the dynamics, you should see a board, as well as a battery, which is traditionally fixed on the screen.

Replacing the screen

If we talk about how to disassemble a DNS tableboard or some other one, we first need to disconnect the screen ribbon, which is done with a screwdriver, gently prying it, then we need to find the bolts holding the board in order to unscrew them. The board should be carefully disconnected, and then put aside. As a result, you will only have a screen and a battery. Now it's time to disconnect the screen that you decided to replace. Carefully separate its corners from the adhesive tape when it is available or from the glue. The scotch is removed, then it is put aside, it will have to be used again. It is designed for more reliable fixation of the screen, so that dust does not fall under it.

Shoot the screen

This procedure will cause the screen to separate very easily from the plastic. Next, you need to separate the battery from it, which can hold on glue or double-sided adhesive tape. Therefore, all work should be done very carefully so that the battery pack is not damaged. You can disassemble the screen, and to do this, just poke it and remove it from the latches.

Now that you understand how to disassemble the DNS tablet, you can take a new screen to do all the operations described earlier, in the reverse order. A screen is mounted on the rubber seals, the board is screwed in and a loop is inserted. After all described manipulations, it is worth checking whether your gadget works or not, for which the charging is connected and the device is turned on. If everything works, you can attach the battery to a double-sided tape. Now you just put the lid on and screw it.

One can give one important advice. So that you do not forget how the screen was located, trains, etc., it's worth taking a picture still before the disassembly of the device, and also during the work. This must be done, especially if you do it for the first time. You can also note the fact that Chinese tablets screen models can be very much, but do not despair of looking for just such a model, because you can go and some other.

Causes of problems

Analysts say that this year the tablets should be sold more than laptops, but if the majority of users already know how to handle the latter, then not all are capable of successfully operating the tablets. Because of what suffer and fight screens of tablets? Due to the fact that they are very thin, fragile, and also due to inaccurate handling of them. Even the most accurate owners can become a victim of improper handling of the tablet by children, guests, animals and in other circumstances. In order not to need repair, it is important to keep the screen gadet whole.

How to save the tablet screen?

So that you do not have any questions about, for example, how to disassemble the Asus tablet to replace the screen, then it's worth sticking to several rules. First of all, careful handling is important. The tablet should not be dropped, left on sofas or chairs, given to inadequate people, always instruct children and so on. It is necessary to acquire a sheath, preferably having a rigid surface, which protects the screen. This allows you to keep the device in good condition, protecting it from certain causes of damage to the screen. Glue the screen with a protective film. It usually costs quite inexpensively, but gives the glass a fairly high degree of strength. Protective film should be glued on the new device, until the glass is not contaminated. It's best to choose a film for your specific tablet model, since all devices are equipped with different screens. Usually a good film can last at least a year.

The question of how to disassemble the tablet of Prestigio Multipad or another manufacturer, most often occurs when the screen is broken. Usually the screen consists of two layers: from a touch glass touchscreen and a matrix. Usually the matrix remains intact, but the touchscreen is broken. Even in a broken state, it can still work for a while, but do not delay with repairs, since in this case the probability of damage to the matrix increases substantially. In addition, the sensor decoder can be blocked, because of what it can not earn even after a replacement.

Such tablets as Prestigio Multipad allow changing the touchscreen without changing the matrix. But if the screen cracked at you from a fall or a blow, or you used a device with a cracked screen for a long time, it is likely that the matrix has suffered, but hidden damage often comes out only during the glass replacement or during further operation. In this case, you will need to replace both the touch glass and the matrix.

If we talk about how to disassemble the tablet Prestigio, then the process is similar to the previous description. You can consider working with devices from other manufacturers.

Acer tablets

If we talk about how to disassemble the tablet Acer, then it is worth paying attention to certain points. The device is equipped with a metal back cover and plastic side inserts. This is to ensure that the antennas are not covered with metal. Hold the lid special latches. Open it stands on the side of USB or HDMI. Then, reaching another corner, you can pull the lid in the middle to open one edge completely. Similarly, the second edge is detached. The upper part is simply pulled from the latches by pulling the entire cover down. Under the cover, where a memory card is usually inserted, there is a warranty sticker from the manufacturer.

Disassemble the tablet Explay

Explay is a fairly young Russian manufacturer, which managed to win the love of connoisseurs of excellent gadgets. But in this case, sometimes it becomes necessary to repair the device, which means that the question arises as to how to disassemble the Explay tablet. Usually, there is no particular difficulty in this. You need a small screwdriver. On the device you should find the bolts, and then start to work. The lid is then removed very simply. Remove it should be neat, because it is sometimes fixed to the speaker, and it does not need to be torn. In addition to the speaker, you will see a board, as well as a battery, which is usually fixed on the screen. Next, you can do with the disassembled tablet what you did it for.

If we talk about how to disassemble the Oysters tablet, then the sequence of actions has much in common with those that have already been described above. You can make only a few corrections to the gadget model.

In conclusion, it is worth saying that it is best to contact qualified specialists if you need to carry out repairs.