How to connect the sconce with a switch cord. How to choose the right wall bracket for different rooms

By equipping your home, you often have to do a lot of different work, this includes the connection of all kinds of electrical appliances. This article will tell you how to properly connect the sconce with the switch cord.

Wall light with lace

Modern lighting fixtures have a different type of inclusion: using a key, using a button, a lace or a chain. Wall sconces are an excellent complement to interior decoration, but one should not forget about another advantage - functional purpose - lighting certain areas of the room.

Wall sconces are great for installation in the bedroom, hall, bathroom. Quite often they illuminate long corridors or certain zones of utility premises with the help of them. It is very convenient to use sconces for reading or needlework, so they are often placed over a bed or over an armchair.

Lighting from wall lights like to use designers to translate their ideas, to emphasize certain elements of the interior and disguise the protruding details. To date, the range of such luminaries is huge, so it is possible to choose different shapes of plafonds, color solutions, as well as different performance of the luminous flux.

How to connect the sconce with the switch cord

Before you begin installing the wall, you need to accurately determine the location of the device, carefully make measurements. Especially this applies to twin lamps, which will be located in parallel. To determine the location of the luminaire, you must take into account the established rules - usually such luminaires are installed at a level of 1.5 meters from the floor. Here often there is a question on how to connect a sconce with a switch with a cord so that no unnecessary wires are visible. For this purpose, it is necessary to carry out concealed wiring in advance for the subsequent connection of the lighting fixture.

The installation itself begins with the connection of two or three wires. Before this, the network must be completely de-energized, and the work will be carried out using a sharp knife and an insulating tape. First, the insulation at the ends of the wires is cleaned - approximately 5-8 mm. Then the stripped wires must be bolted to certain terminals.

Possible types of connection

In this section of the article, we will discuss how to connect the switch bracket with a cord with two or three wires.

1. With the existing three wires: ground, zero, phase. They are connected to certain terminals, clamping the tip of the wire with a clamping bolt.

2. With the existing two wires: a white or brown wire (phase) is fixed to terminal L. The blue wire (here there can be any shades of blue) (working zero) is connected to terminal N.

After all the wires are connected, you need to close the housing by placing a protective cover. The lamp is attached to the wall with self-tapping screws.

So, how to connect the sconce with the switch with a cord, we figured out, it remains only to install the lights and check the lighting device.

Sconce for bedroom and children's room

Choosing a lamp of a certain model, shape, color, you need to think over in which room it will be installed, because different rooms are suitable for different lamps. For example, the sconce in the nursery or bedroom should be with soft diffused light. Such lighting relaxes and prepares for sleep. Here, a dense lamp shade on the lamp or matte shades is perfect. For the children's room you need to take care of everything else for safety: here the sconces can not be crystal or glass so that the child does not accidentally break them and get hurt.

It is very convenient when the brightness of the lighting changes on the lamp - you can replace the camera light with a brighter one when you want to read. For a children's room, this is also very convenient, because children are often left with a weak light all night, so the sconce can serve as a lamp and night light. In nightlights, the use of LED lamps is quite popular, as they save electricity.

Where to install sconces with a lace in the bedroom and children's room

Usually wall sconces with a lace in the bedroom are installed at the head of the bed. If the bed is double, then one lamp from each side. If the bed is single, then one lamp from one side. The way to install the sconce into the children's room is slightly different: here it is usually installed over an armchair, so that an adult can read stories to a child before going to bed, and the light does not prevent the baby from sleeping. At the same time, it is very convenient to use a switch with a cord switch to turn it on and off, without getting up from the chair.

Wall sconces are great for bedrooms and children's rooms, as they not only serve as decorations, but add functionality to the bedside area. They do not occupy seats on the bedside tables, thus giving the opportunity to put on it more necessary things.

Sconce for hallways and bathrooms

Lamps in the hallway and bathroom are selected by other criteria. Often these are small rooms, where the sconce is the main source of light. But for more effective design of these rooms the sconce is specially installed for illumination of mirrors and the most significant zones. Choosing a luminaire for the bathroom, you need to consider the humidity of this room: most likely, you will have to buy a waterproof lamp. And in order for this device to look better, you need to have plumbing materials combined with a lamp.

Fixtures in the hallway should be chosen according to the following principle: they should not differ too bright light, because a person here comes from the street or from the entrance and a bright light in the eyes causes not too pleasant sensations. If the hallway in the apartment is made in the form of a long corridor, then several identical sconces set in a row will look great here.