HomelinessTools and equipment

How to choose a heatpipe? How to choose a house heatpot? Photos, references, recommendations

The life of modern man can not be imagined without the use of various electrical appliances. Numerous devices for us prepare food, wash dishes and in other ways facilitate our life. Among those devices that are necessarily present in any kitchen, you can note a teapot.

In this article we will look for answers to popular questions of those for whom some devices are still new. Or rather, we learn how to choose a thermo-hood and what it is.

Modern teapots: how do they look?

Not everyone can imagine what they are talking about. In fact, it is a household electric appliance combining the functions of a kettle and a thermos. In other words, a functional and qualitative electric heatpot is able not only to burn water, but also for a long time to keep it warm.

To the reasons for which this device is purchased for the kitchen, carry the following tasks:

  • Preparation of tea, coffee and other drinks.
  • Brewing different foods.
  • Preparation of baby food, etc.

In other words, there are a lot of cases when hot boiled water is needed in the kitchen, so it is always useful to have such a device nearby. And many people are thinking about how to choose a thermo-horn so that it meets all the requirements.

Different manufacturers present their models, differing in size, some design features and, of course, appearance. It is on the basis of this that we must seek a reasonable compromise.

Main features of electrical appliances

A modern electric heatpipe is a very functional and practical device. It can significantly facilitate life, even in comparison with traditional household electric kettles. That is why many prefer it to him, even despite a slightly higher cost.

The main features of this device are:

  • Rapid boiling water.
  • Maintaining the set temperature for a long time.
  • Water filtration (depending on the model).

In the market among the presented assortment there are models which have won a good reputation. Usually the best heatpot is one that requires minimal intervention. It is enough just to fill the water in time, and it will always maintain the necessary temperature.

The main features of the device include the function of selecting the desired temperature - usually 60, 80 or 90 degrees. In the upper part there is a button, when you press on which the drain occurs, that is, you do not need to raise the kettle.

The most "advanced" models are equipped with water filters. This reduces the level of pollution, and the beverage becomes safer, and even beneficial to human health.

Structural features

Teapot-thermopot, despite its capabilities, is quite simple and reliable design. The main elements are:

  • Water reservoir.
  • Heating element (heating).
  • Control elements.
  • Filter for water (depending on the model).

In fact, such a device is no different from a conventional electric kettle, except for the presence of a filter. Also, for a long-term preservation of the temperature, the reservoir is covered with heat-insulating materials.

Advantages of these household appliances

The choice of this or that device is primarily determined by certain advantages and disadvantages. It is on the basis of their comparison that we can make the final choice. In addition, it helps to determine how to choose a thermo-peak among all the variety.

The merits are usually:

  • Possibility to have a constant supply of hot water.
  • Easy operation.

Understand the control is not difficult, therefore, once you have set the necessary settings, you can always have at hand hot water at the right temperature. In addition, unlike conventional teapots, thermo-receptacles accommodate a larger volume of water. And the lack of the need to raise them (thanks to the availability of a special drain) makes such devices attractive for the elderly, women and children.

Disadvantages of household treads

Along with this, it is necessary to tell about some shortcomings:

  • Longer heating of water.
  • Higher energy costs.

The power of modern thermo-potholes varies from 600 to 1000 watts, whereas for traditional electric teapots this figure reaches values of 2000-2500 watts. Thus, heating occurs 2-3 times slower.

Also maintaining a constant temperature requires more electricity. If the kettle can quickly heat the water, when necessary, the heatpipe will periodically turn on its heater.

Features of choice

When choosing in most cases it is not enough to be guided only by technical characteristics and descriptions from manufacturers. It's not enough to make the right choice. To understand how to choose a thermo, reviews Other users should learn to start.

Now many are ready to share their experience in the operation of a particular model, so there should not be any problems with this. The main characteristics that are worth paying attention to are:

  • The volume of the water tank.
  • Device power.
  • Options for customization (fixed temperature, timer, etc.).
  • Availability of additional functions.

It is necessary to determine for yourself what is most important. Some put in the first place a constant temperature control, while others are interested in economy.

Models of the budget price category

To inexpensive models usually carry the thermo-tip Polaris. This manufacturer is famous for offering inexpensive but practical solutions for a wide range of consumers. That is why many pay attention to this brand. Also there are interesting models from other manufacturers.

Worthy of attention thermopot in this price category can be considered:

  • Polaris PWP 3007.
  • "Fairy TP-401".
  • Supra TPS-3004.

The first model in this list pleases with its metal case with double walls. The power of the device is 750 W, capacity - 3 liters. There is a standard set of functions - temperature mode, interlocking, protection against electrical surges, etc.

The other two models are somewhat simpler, but they are reliable enough, so you do not have to worry that you need to repair the thermopot or there will be other problems.

Users comment on the model Polaris PWP 3007 quite well. Among the main advantages are low cost, as well as reliability. Such devices are used for many years. Model "Fairy TP-401" is a good alternative, although it is produced by a little-known Chinese company. And this is the only significant drawback.

Models of the middle price category

In the average price range, very different models come out on top. Here, the leader can be considered the Panasonic heatpipe. Although along with this a good position takes the products of Toshiba, which is not currently a world leader, but quite confidently sells its equipment.

The rating of the most popular medium-priced electrical appliances is as follows:

  1. Panasonic NC-PG30.
  2. Toshiba PLK-45SDTR.
  3. Toshiba PLK-30VETR.

Thermopot Panasonic Has the whole two temperature modes, as well as the function of delayed start. Separately it is worth noting the availability of a useful option "Lowering the chlorine level" and descaling.

Toshiba products attract a good appearance, high performance at affordable prices and a number of additional functions.

Panasonic products are traditionally a good combination of price and quality. Many consumers are positive about the products of this company and are ready to choose them, even with minor overpayments. The thermo-lot from Panasonic always provides hot water.

Models of premium segment

In this segment, the situation changes radically. When we need a heatpipe, the price becomes an important criterion. And while everyone wants to get an efficient, economical and reliable model.

In this case, it is worth paying attention to products manufactured under such well-known brands as:

  • Samsung.
  • LG.
  • Panasonic.

Among the presented variety of models it will not be difficult to find the most interesting and useful thermo-pin for yourself. He can satisfy even the most demanding taste. Such electrical appliances differ not only in functionality, but also in reliability, therefore repair of the thermo-pot is hardly required, at least not long after the purchase.

What do consumers say about this product?

Usually much attention is paid to functional features. Companies Samsung and LG offer advanced models, in the capabilities of which there is no doubt. Many also note a stylish and attractive design.

Features of choice: the main aspects

The most important characteristics of the device have already been mentioned above, but this is still not enough to answer the question of how to choose a heatpot for the house. A lot of subtleties are misleading, so you have to consult with experts or study the information from the manufacturer in more detail.

The cost of the device varies from 3 to 12 thousand rubles on average, although there are also more expensive devices on sale. But regardless of the price, you want to get just such a device that will satisfy all the basic requirements, which will not cause problems during long-term operation.

What criteria are most important in choosing, it was said above. Also it is necessary to pay attention to such moments as:

  • Appearance.
  • Method of supply of boiling water.
  • Design features.
  • Features of maintaining the temperature.

As for the appearance, the traditionally the most stylish, but at the same time expensive, are devices with a metal casing. It is not only strong, but also good indicators of heat resistance, thanks to the presence of double walls. Plastic models are cheaper, so they find their customers among those who are not going to overpay money for the design.

Volume is one of the most significant selection criteria, because it depends on whether the boiling water is available even with constant use of the thermospot. When choosing, consider the number of family members to calculate the approximate costs. The most optimal volume is usually considered to be 2.5-3 liters.

Do not forget about the way to feed boiling water. The teapot does not need to be tilted to get water, because it has a special pump. On sale there are models with both electric and mechanical pumping. In the second case, the kettle can be used even when it is disconnected from the power supply.

One of the key parameters is the peculiarities of maintaining the temperature. In fact, it is for this reason that such devices are acquired. According to this criterion, the models presented in the sale are divided into two main categories:

  • Capable of maintaining any temperature constantly (automatically warming up the water when cooling down).
  • Working on the principle of thermos - allow after boiling to keep for 6 hours a sufficiently high temperature.

Obviously, the first type thermo posts are more practical and convenient to use, but they require constant connection to the network and consume more electricity.

General conclusion

On sale there is a large number of interesting and fairly inexpensive electric appliances for the kitchen. They will help solve many problems and greatly simplify everyday life. However, when choosing it is necessary to pay attention not only to the pros, but also to the cons. Especially such as power consumption, management complexity, the need to provide special operating conditions, and so on.

If everything is done correctly, it is quite possible to buy a model that is inexpensive and reliable. The leading manufacturers at the moment are Panasonic, Polaris, Toshiba, Vitek and some others. A significant role in the selection is played by technical parameters - power, availability of additional functions (timers, "Delayed start", self-cleaning system, etc.), volume and much more. Although this should not be forgotten about such an important aspect as the design of household thermo-pothor, it should take a worthy place in the kitchen and fit into the overall interior.

Similar articles





Trending Now






Copyright © 2018 en.birmiss.com. Theme powered by WordPress.