How to catch a beaver? Effective methods

Meat, skin, stream and beaver fat are quite valuable and will be useful in any farm. Only the animal needs to be unharmed, so the hunters began to apply different ways of catching beavers at different seasons. Only in this case, not everything is so simple, so strong and intelligent is the animal - beaver. How to catch, how not to be outlawed, what ways of catching better - this can be read in this article.

Weapons - the pros and cons

Probably the most common way to get a dead beast is to use a gun. But not always this way brings some advantages.

Pros:

- Quick killing of an animal. The hunter saw the beaver, fired, and got the killed beast. You do not need to mess with anything.

- The range of the bullet. Is the animal far away? A sharp shot will allow to hit the target and not miss the prey.

- Simple and easy to use. The weapon is not that heavy and does not require additional knowledge, so it's quite easy to handle it.

Minuses:

- Dead animal. Sometimes it is necessary to get the animal alive.

- Damage to the skin. If you need to get a whole skin, then the gun will not work, because the bullet or shot break its integrity.

Trap

If it comes to how to catch a beaver, then you should immediately pay attention to the trapped hunt. Of course, there are complications in this business, so you have to be ready for them immediately.

Trap selection

Beaver is a strong and fast animal. Therefore, you need to choose a good trap. The seventh trap with rounded arcs will be the best option. Of course, you can look at other versions of this kind of beaver catching, but do not forget about the physical data of the rodent.

Installation location

Before installing the trap, you should carefully inspect the area and find the most favorable place where the beaver often appears. How to catch in a trap after a good exploration, will remain a matter of time. During observation it is worth paying attention to the places where the beast goes to the land, where there is a place to get food and other materials for its life.

Direct installation

At first glance, it may seem that it is quite easy to install a trap. Only in practice, everything is different. If we talk about how to catch a beaver in a trap, it is also worth mentioning the maximum caution of the hunter. In addition, we must not forget about our own safety.

In most cases, this hunting tool is installed in the water, so it is necessary to mount it in such a way that the animal does not see the danger, but at the same time that the mechanism works in time. At a shallow depth, you can put a trap on the bottom, and if it is installed in a place where it is deep enough, then it is necessary to resort to the help of wooden stakes and a cable so that the rodent can not go ashore.

For disguise, you can use special items, as well as natural conditions. You can just shake the water so that sand and other small debris cover up the trap.

Catching the beaver in the winter

Probably, many people believe that the beaver sleeps in winter. Only in fact this does not happen, beavers simply reduce their activity, so it is worth mentioning the question of how to catch a beaver in winter.

It should be immediately said that winter hunting is not an easy task and it requires a lot of money, especially in physical terms.

Preparation of a hunting place

Winter catching of the rodent begins in autumn. When the ice has not yet appeared in the pond, it is necessary to find the deepest place where the beaver settlement is located. And note it. This is necessary in order that in winter it would be easy to find a place for future installation of the trap.

When the ice is normal thickness, withstanding the weight of a person, you can start hunting. In the marked place it is necessary to make an ice-hole, the size of 50x50 cm. It is necessary to find a small tree trunk of the appropriate length. One end of the cooked tree is stuck in the bottom of the reservoir in such a way that the trunk is at an angle of 35-45%, and the other should stick out with ice.

Setting the Trap

The answer to how to catch a beaver in the winter time implies the use of a trap. Accordingly, after preparing the ice hole, it is necessary to proceed with its installation. Only in the first place it is necessary to prepare a special strong pad for the mechanism to stand firmly. An excellent assistant in the manufacture of it can become a small chock.

It is also necessary to prepare a broom from aspen branches (bait for beaver). You can, of course, use another tree, but it is best to take aspen, the branches of which should not exceed a length of more than 1 meter.

After all the necessary preparations, you can install a trap. The area with a trap is put in the middle of the hole, then at a distance of about 50 cm the broom falls. After this, it remains only to wait for the beast.

Other ways to catch beaver

Trap is the most effective and widespread option. There are also other ways of how to catch a beaver. Before the appearance of the above mechanism, the hunters caught it with the help of dogs. They drove the animal out of their house, and the dogs drove him to the necessary place where a trap or a loop was installed.

At this point, you can talk about how to catch a beaver loop. Only this method of catching an animal is illegal, and the complexity is much greater than catching with the previously mentioned mechanism.

Beaver hunting period

In order not to get under the close attention of law enforcement agencies, it is necessary to remember the period of this hunt. Basically in all regions hunting for beaver is allowed in the cold season, namely from autumn to spring.