Homeliness, Do it yourself
How to build a drip irrigation from a plastic bottle yourself?
Each owner of the dacha tries to make his own plot not only beautiful, but also functional. If you want to organize a garden or a garden near the house, then all plants will require additional moisture. Drip irrigation from a plastic bottle is a way out of this situation, and to make it simple enough.
Drip irrigation from a plastic bottle can be superficial or underground. The second option is characterized by the fact that in the side walls and the cover of the element the holes are scrolled, and the capacity is buried near the root of the plant. However, in this case, it is necessary to take into account the soil type. For example, clay soil can very quickly pinch holes. To organize the irrigation system should use a fairly large container, designed for 3-5 liters of fluid.
Further, soil drip irrigation from a plastic bottle is done as follows: the bottom is cut off from the tank, which should not be thrown away - it will protect the water from rapid evaporation. The rest of the bottle is installed with a stopper down. In this case, several holes must be made in it. Bury the bottle carefully, so as not to damage the roots of plants. Set the capacity better during the transplanting. To ensure that the lid is not clogged underground, you should wrap the bottle with a nylon stocking. Since in such a system water is consumed slowly enough, it is possible to fill the container every few days. Bury it at a small angle (45 degrees).
Surface drip irrigation from a plastic bottle is built much faster and easier. For its organization you will need a support, to which it will be possible to tie the container over the plant. The bottle should be hung with a neck down, and in the plug you need to make holes or periodically twist it a little.
It is not difficult to make drip irrigation with your own hands . In order for all the beds to be equipped with water, it is possible to construct a simple structure with slats on which slingshots are installed. So that the soil in the places of irrigation is not washed out, it follows that under the places on which the drops fall, lay a small piece of oilcloth, lightly sprinkled with soil. This design is ideal for plants such as tomatoes, cucumbers, peppers.
Thanks to such a structure, you can not only create the most comfortable conditions for vegetable growth, but also save money on building a professional irrigation system. The more so that you can easily use the improvised means that are available at every dacha. That's the whole answer to the question: "How to make a drip irrigation?"
Similar articles
Trending Now