HomelinessDo it yourself

Decorative pond in the dacha with your own hands: an original design solution for your infield

A few years ago, the presence of an artificial reservoir in the country in the garden or in the backyard was considered a rarity. Just imagine: the smooth surface of the water, the quiet murmur of the creek, the green plants blooming along the banks of the reservoir ... Having trimmed the ornamental pond in the dacha with your own hands, you can change the face of the site - it's unusual, and just pleases the eye.

Organize this composition can be any person. Here you can go in two ways: either make a pond of ready-made forms, or use film material.

Create a decorative pond in the country with your own hands from ready-made forms

This is the quickest and easiest way to create a pond on the site. Specialty shops have ready-made forms from polyethylene and fiberglass, as a rule, they are frost-resistant. By design and depth, they are different. Choosing the configuration and volume, you need to be guided by the size of the area on which the composition will be located. Also it must be remembered that the finished decorative pond, at the dacha with its own hands installed, will look much smaller than the form itself.

When purchasing a container, it is advisable to choose it with a marsh zone, which is intended for aquatic plantations. If you prefer a form without it, then you should take care of purchasing special containers for plants.

An important point in the construction of a reservoir is the installation of the form itself. First of all, you need to choose a suitable place, so that the pond fits into the overall landscape. Do not arrange it near trees, as this contributes to rapid clogging, and, most importantly, damage to the shape of the roots over time.

Installation begins with digging a moat in a form with an indentation of 20 centimeters for ease of work. It is important when installing the pond, or rather before filling the gap between the form and ground with sand, pour the bottom of the container with water for a more dense shrinkage. After installation, you can proceed to plant coastal plants and water in the marsh zone. Make a decorative pond in the country with your own hands can be using a metal container, if it is planned to be small. As such a tank, an old bath is quite suitable.

Artificial pond in the country with the use of film material

Another option for creating a decorative reservoir in the country is using PVC as the base . It is prudent to purchase expensive and high-quality material that can last up to 15 years. PVC flooring is made of various densities, for a 1.5-meter pond (in depth) a film with a thickness of more than 1.5 millimeters is suitable.

Installation of a "film" reservoir, unlike molding, is performed only in the summer at a temperature of at least 20 degrees, when PVC is the most elastic.

Digging a ditch can be of arbitrary shape, if desired - this is one of the advantages of a "film" pond. To avoid damage to the floor, the ditch is filled with gravel, then sand, a layer of geotextile or felt is applied to it. Only then the future bottom is lined with film. To hide its residual pieces in the coastal zone, the shore is peppered with pebbles or small gravel. After the work done, you can fill the water and start decorating.

Create a pond in the country with your own hands, the photo of which you see, you can and on a small terrace, but on condition that its design allows.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.