How do I clean the glass ceramic plate? Tool for cleaning glass-ceramic plates

Manufacturers of kitchen appliances constantly amaze their fans with new technological developments. Not so long ago, the popularity of models won plates with surfaces of glass ceramics. The new material has shown itself from the best sides in the most diverse aspects of operation - from safety to efficiency of heating. But also the most pleasant nuances of caring for him were quickly revealed. How do I clean the glass ceramic plate? This is one of the key issues that should be considered when purchasing such models, since standard maintenance methods in this case are indispensable.

The basic means for cleaning

The most reliable method of cleaning involves the use of tools recommended by the manufacturers themselves. Usually they also produce devices for the care of glass-ceramics. Cleaning kits include two main components - directly detergent and scraper.

As for the drugs, they are usually delivered in 500 ml vials. At the same time, this volume is sufficient for a long time, so it is not worthwhile to store additional mixtures. This cleaner for glass ceramic plates is specially designed to remove lime deposits, food residues and grease stains without harm to the surface. Moreover, some agents form a protective coating in the form of a silicone film. In turn, the scraper can be made of plastic or metal. The choice between these materials is not fundamental, since there are no special requirements for the reliability of the device in this case. Another thing is that the metal is durable, and the plastic is lighter and more practical.

Folk recipes

If, for one reason or another, there is no special cleanser at hand, you can resort to folk recipes. First of all, you can use the means for washing dishes, baking soda or a windshield wiper. It is best to prepare creamy pastes, which are easier to apply and handle the surface.

A good tool for cleaning glass-ceramic plates is a table vinegar, diluted in water. Together with effective solutions, removing the surface from dirt and stagnant spots, it also provides the effect of disinfection. If there is no special scraper in the household to work with glass ceramics, then it can be replaced with a melamine sponge with a soft structure. The main thing in the preparation for caring for folk recipes is to insure the stove from deep scratches.

Cleaning technique

Before working with food remnants and not stagnant prigarami it is necessary to wait until the stove completely cools down. The state of technology can be determined by means of a special temperature indicator. More important is the question of how to clean the glass-ceramic plate, if the foil particles were attached to it or the sugar melted on the surface. In this case, it is necessary to treat the non-cooled surface. The above-mentioned complete scraper is in use. It resembles a small razor, which is easy to remove foreign particles from the surface. But you need to do this carefully, without leaving cuts.

Detergents go to work after the main dirt is eliminated from the coating. It should evenly distribute the composition on the plate, then use a sponge to perform circular cleaning activities. The last stage is also very responsible. The answer to the question of how to clean the glass-ceramic plate so that no traces remain on it, also depends on the quality of the materials used. At the final stage, you should wash off the cleaning solution and wipe the surface with kitchen soft napkins, structurally resembling a fiber.

How can I clean glass ceramics?

First of all, you should not use specialized tools designed for working with ovens. As a rule, these are effective in the function of sprays and stain removers, which give a good cleaning effect, but because of chemical properties are not suitable for sensitive coatings.

A new glass ceramic induction plate often has an adhesive layer on the surface. With him mistakenly try to cope with abrasive coarse-grained tools. Do not do this because of the high risk of damage to the surface. Again, it is worth using the delicate function of the scraper, which will rid the glass ceramics and of this kind of unwanted coatings.

Nuances of cleaning models "Hansa"

Hansa belongs to the group of manufacturers who in any case do not recommend the care of unheated plates. Also, the manufacturer warns against the use of even soft-structured sponges, since they are capable of causing minor damage. How should the Hansa cooker be serviced in terms of compliance with the operating rules? Care should be as gentle and gentle as possible. These include emulsions and liquids designed to remove stains.

In extreme cases, in the absence of special solutions, a combination of warm water and dish washing agents can be used. As for the instrument itself, the Hansa cooker is supplied with the same scraper, which will help remove especially problematic particles from the surface of the glass-ceramics.

Nuances of cleaning Gorenje models

This manufacturer also does not advise you to look after the plates that are in a heated state. To remove stuck particles, the company recommends specialized compounds. She refers to such means as "Sidol", "Kerr" and similar to them on a set of components.

It is important to note that the Gorenje glass-ceramic plate is also afraid of rough cleaning agents, which include metal sponges, alkalis and powdered abrasives.

Care of plates AEG

The developers of AEG models are strongly advised not to wait until the melted sugar or plastic is solidified on the surface and further will cause even more problems in the cleaning process. The same scraper should immediately eliminate contamination, and then carefully remove the stains with a paper towel. In this case, the question of how to clean the glass-ceramic plate can be solved by heating the equipment. According to experts of AEG, this measure will help soften the structure of some types of scale and facilitate the process of their removal. At the final stage, the final cleaning is done with a dry napkin or a new towel on a paper basis.

Conclusion

The induction principle of modern kitchen stoves attracts an increasing audience of consumers. Such models are good and efficient warm-up, and ease of use, as well as a high degree of functionality in terms of management. But the electric glass-ceramic plate will be able to provide all the listed advantages only in case of competent care.

If you combine the recommendations for servicing glass ceramics from different manufacturers, then the rules are reduced to several principles. First of all, the choice of the cleaning method should be based on quite accessible special means designed for this type of plates. As for the restrictions, they are also quite certain - it is possible to spoil the glass ceramic surface with potent chemistry, rough abrasive brushes and sponges, as well as powders whose grains are capable of cutting a sensitive coating.