Hardware manicure step by step: technique of implementation, features and recommendations

The modern girl first of all follows her hands, because they are her business card. Now, the technology of the hardware manicure pushes the simple ordinary back far back, because they are not only technically more modern, but also save a lot of time on creating a manicure.

What is a hardware manicure?

The main thing that distinguishes this type of manicure from the usual is the technique of its execution. The hardware manicure is performed step by step only on dry nails. They do not need to be steamed first. Also, the cuticle is not completely removed, it is only necessary to remove the necrotic parts.

You can perform a hardware manicure at home, step by step, and you can contact a specialist. In this procedure, a specially designed machine is used. It has several baits and the ability to perform several operations. In occasion of harm or advantage of spent actions it is possible to tell, that they will be more sparing, as the skin of fingers is disturbed minimally.

Hardware manicure step by step: what nozzles are used?

A very important point in choosing tools and adaptations for hardware manicure is the selection of the milling machine. Its quality and functionality play a leading role. However, in second place here is the number of baits in this machine and their quality. In general, all attachments are divided into two broad categories:

• Milling cutters;
• drill.

In this case, the nozzles can be bought separately, but their parameters must match your machine. The material from which they are performed plays a key role in their classification. Also, depending on the material may be different and scope.

Ceramic attachments

This kind of nozzles is made by baking special glue and mixed with it abrasive. The abrasive can be of different sizes, which can also distinguish the nozzles from each other. If you use this type of nozzle, then periodically have to clean them, because the grooves in their surface have a property to clog.

Ceramic attachments work with the skin, with the nails with their help it is not recommended to conduct any procedures. Also, by no means these nozzles can not clean arches under the fingernails. Otherwise, you risk ruining the nail.

Diamond attachments

This type of nozzles can be divided into two types: sintered and precipitated. Different in them and the scope. Sintered can not be used in the treatment of skin and gel, but they are very good when working with acrylic. It must be cleaned in time.
Precipitated tips are very well proven when working with gel, acrylic and nail treatment. However, when working with the skin, they are not very well behaved because of lack of sharpness.

Metal Cutters

The technology of the hardware manicure step-by-step involves the use of metal milling cutters. They are made, as a rule, from hard-alloy material. Their distinctive feature is that this nozzle can rotate in only one direction. They are used to remove coarse and keratinized skin, and also to reduce the thickness of the acrylic or gel coating. It is also possible to remove them from the burr and carry out preliminary treatment of the nail surface.

Silicone polishers

The technique of performing a hardware manicure step-by-step also involves the use of silicone polishers. They are perfectly polished gel and acrylic, and with their help you can give the skin silky.

It will be very good to use this tool if you need to remove gloss from the nail plate, and then carry out the procedure of building. Thanks to the softness of silicone, all procedures are painless.

Step by step execution of hardware manicure

Hardware manicure for beginners step by step is not so difficult. The main thing before starting to have good theoretical training and a little bit of fantasy. If you have purchased a machine and attachments for a hardware manicure, and all the necessary tools are available, you can begin to apply your knowledge in practice.

The first step is the preparation of the fingers. To do this, they are treated with a softening agent. This makes it possible to soften the cuticle and make its removal painless.

The second step will be the processing of the cuticle and skin around the fingers. To do this, you can use a diamond nozzle. The key point here is that you have to keep track of your feelings during this procedure.

The third step will be giving the nail a certain shape. For this, a cylindrical or trapezoidal milling cutter can be used. It should be remembered that above the bundles of fingers there should be at least 2 mm of nail.

The fourth step will be polishing, which is the most difficult process for beginners. Do not bring the edge polisher close to the nail. The attachment does not need to be held in place for more than one second.

The last, the fifth step, will be the treatment of hands with oil in order to remove the remnants of the nail. The oil must be well absorbed, and its residues can be removed. After that, the nails can be dyed.

Devices and tools for hardware manicure

In general, a full-fledged device for performing hardware manicure should be multifunctional and have in its kit all the necessary accessories. The kit includes the machine itself and a lot of different attachments. The principle of its work is the same as that of the dentist's drill.

It will be best if your machine is equipped with a built-in mini vacuum cleaner. This will make it possible to avoid inhaling the dust formed during the treatment of nails.

In addition to tools, you will need more oil and an emollient for the rough skin of your hands. If necessary, you can use a hand cream.

At the request of the client, after the procedure of the hardware manicure, additional means for the care of hands and nails can be used. After some time after the manicure, you can correct it with a normal nail file.

Advantages and disadvantages of hardware manicure

The technology of performing a hardware manicure step-by-step has a number of its features, which can represent both its advantages and disadvantages. First, this type of treatment proved to be the most sparing. Also it is very safe and protects you from small cuts and cracks, which are almost inevitable in the ordinary manicure.

The hardware manicure can step-by-step slow down the growth of the skin treated in this way, and this will prolong the period of re-holding these events. This kind of manicure is very suitable for use on dry or uneven nails.

Hardware manicure step-by-step also has negative aspects. First of all, this is the appearance of a burning sensation after the baits. Because of inexperience, there is a risk of damage to the nail plate itself and the appearance of streaks on it.

Hardware manicure does not work, if initially the nails are in a very neglected state. Also, the quality of the manicure and the achievement of the desired result depends directly on the number of available attachments. In this case, you will have to purchase the entire set of tools at once.

Some tips for doing hardware manicure

Hardware manicure step by step is not recommended for people who have thin or soft and elastic skin. Also, the application of this procedure is not desirable in the case when the cuticle grows very strongly on the nail.

Now the technology of hardware manicure is widely spread not only in beauty salons or manicure salons. Its implementation is quite possible even at home, having the most minimal set for nail care and manicure. However, one should not abuse this achievement and carry out the procedure very often, because in addition to the benefits, it can also have a negative effect on your nails, which will significantly spoil their appearance.

Those who are not confident in their abilities or have a negative experience of doing manicure at home, as well as girls who are going to march on a responsible event, it is better, perhaps, to seek the help of professionals and take advantage of their useful advice.