Garden paint for trees: types and description

Spring and autumn processing of fruit trees implies mandatory whitewashing or painting. Although some gardeners and gardeners prefer to ignore this procedure, it is worth mentioning that the paint for painting garden trees protects the garden and increases its yield.

Undeniable advantages of the procedure

Ogorodniki regularly perform such a treatment of trees, they are well aware of the main advantages of whitewashing. And for those who still doubt, we recall that she:

• Increases winter hardiness of fruit trees;
• Protects from the first spring scorching rays;
• Prevents the appearance of frostbites, that is, cortex ruptures as a result of temperature differences;
• Disinfects trunks;
• Destroys insects and pests that hibernate under the bark of trees;
• Promotes disinfection, good and rapid healing of sections and spills.

Treatment of fruit trees with slaked lime

Lime, dissolved in water, is one of the most common means for processing fruit trees. The popularity of this recipe is proved by many years of experience. Buying powder, each can control the consistency and saturation of the solution. In specialized stores you can buy a ready-made product. Entering into it bactericidal and antifungal substances well protect the tree trunk.

Clay, copper vitriol or milk, judging by the experience of gardeners, will be good additives to the traditional solution of lime. The consistency of the composition becomes less fluid, better attached to the surface.

Beating the trees with slaked lime is also one of the cheapest methods of caring for plants.

Water-based paint

Some gardeners prefer to use white water-based paint. This, of course, is not a specialized garden paint for trees, but the resulting resistant film on the bark protects the trunk from frostbite. However, to destroy pests such a solution is beyond the power. To combat harmful fungi and insects, it is advisable to add to the paint components containing copper.

Alkyd paint

Alkyd paints for wood and outdoor work - this is another option for processing plants. It costs relatively cheap, protects against the destructive effects of moisture, air and sun, dries quickly, does not have a sharp or unpleasant smell.

Recipe for Paint for processing plants

Many gardeners prefer to use their own proven recipes. The components and their amount in the composition of the paint can vary depending on the needs. In a ten-liter bucket of water, two or two and a half kilograms of lime should be diluted, half a kilogram of copper sulfate. To increase durability, clay interferes with the solution (about a kilogram is required per bucket of water), paste, joinery adhesive or PVA. If the garden suffers from rodent's tricks, then a tablespoon of carbolic can be added to the mixture, the smell that neither mice nor hares tolerate.

The resulting mass should be thoroughly mixed and left to stand for several hours, after which the solution will find a good consistency, and it can be easily applied.

Modern alternative to hydrated lime

Garden paint for trees, like slaked lime, is able to protect the bark from damage due to severe temperature changes, sunburn, pests and fungi.

Such a product has a wide enough purpose. After all, garden paint, used for the whitewash, can also be used for painting the walls and roofs of greenhouses to protect the growing plants in them from sunlight. Wooden furniture, treated with paint, will be protected from pests and moisture and will last longer to its owners.

Aqueous dispersion of acrylic polymers with additives and antiseptics is the basis of the composition. Acrylic paint for garden trees contains antimicrobial and antifungal components, due to which the process of decay stops and the spores of mosses and lichens can spread up the crown. The same components frighten off rodents and hares and do not allow them to gnaw the bark from young trees. However, some gardeners argue that it is better not to process young plants with acrylics.

Garden paint, for trees used, forms on the surface of the thinnest breathable protective film, which does not interfere with natural air exchange.

Protective garden paint "Luck"

This product is processed fruit and decorative trees, berry and ornamental shrubs, as well as bulbous plants. Producers argue that the application of the paint "Luck" even in one layer will provide the tree with protection for two years, the young plant - for a year. Naturally, it protects plantations from pests, ensures the prompt healing of wounds, spills, cuts, breakages, protects against diseases such as fruit rot, coccomicosis, rust, scab, monlilliosis.

An aqueous solution of paint in the proportion of one kilogram to ten liters of water will protect the branches from acid precipitation, purify their lichens. The smell, allocated by means of "Luck", frightens off rodents and mice.

"Expert" - paint for garden trees

It is designed to protect and decorate plants.
After application retains its protective properties for one season. Insect pests that damage wood, spores of fungal pathogens and diseases are not harmful to plants when using this product.

The paint is sold ready for use, it should be mixed well before application. It is applied by brush, it is better in several layers. Moreover, the second layer should be applied only eight hours after the first application. The air temperature should not be below + 5 ° C.

Paint for garden trees, reviews about which are exceptionally positive, perfectly replaces the garden var when processing cuts and slices. Those who have ever used a similar product in their garden, are no longer returning to obsolete calcareous solutions.

Preparation of wood for painting

In order for the garden paint, used for the whitewash, to fulfill its purpose well, the plant must be prepared for processing.

To begin with, the surface should be thoroughly cleaned of all kinds of contaminants: dust, old lime paint, moss, lichen. The necrotic areas of the cortex should also be removed. For these purposes, you can use a scraper or a brush with a metal bristle. It is necessary to act carefully so that the tree trunk is as small as possible. It is unlikely to manage without damages at all.

Only after carrying out the above procedures can you start applying the product to the stem. The height of the painting each trucker determines for himself. In most cases, the trunk is stained at least one meter high.

Proper and timely care of fruit trees will bring horticulturists a rich harvest. Garden paint for trees will allow land owners to take care of their plantings without special effort and protect them from pests. Also they will admire the beautiful well-groomed garden.