Free dress with your hands: pattern, photo. How to sew a free dress?

Today, as never before, in the trend, the simplicity of cutting clothes. Free dress is already a season in a row is a hit. Only the density of the material, the decor, and some modeling moments are changed, but basically the cut remains unchanged. The pattern of a free dress is quite simple in the construction, so even the most inexperienced seamstress can cope with the sewing of such a product. Of course, you can easily go to the store and buy the finished product. But independent tailoring has a lot of advantages, the main of which is the cost, which allows you to pamper yourself for the same money with a couple of updates. About how to sew a free dress at home, and will go further.

Material selection

Free dress is best sewn from knitted fabric. Choose it should be based on the time of year. For winter, you can take angora or wool, for spring and autumn - diving, footer, jersey, for the summer, the ideal option will be stretch culer and micro-oil. Also in the work can be used and linen with a transverse stretch. The advantage of stretch fabrics is that they shrink less. And given that the free dress is wide enough, this fact plays in favor of the appearance of the thing.

Preparation for sewing

Calculations and taking measurements are an integral part of the process of creating blanks for any product. The pattern of a free dress is based on the following measurements of the figure:

• Volume of chest, waist and hips;
• Chest height;
• Width of back and shoulder;
• Height of the backrest and transfer to the waist;
• length of the product;
• Girth of the upper arm;
• Neck circumference.

All measurements should be recorded on the leaf to make it easier to transfer to the drawing.

Creating a Pattern

A free dress, as a rule, has either a trapezoid shape or a straight silhouette. The template for the one and the other model is the same, and all additional elements are built during the modeling process. The template is best done on a cut of wallpaper or building film. The latter option is more practical if the plans do not create one, but several dresses.

So, to sew a free dress with your own hands, you will first need to develop a pattern based on the taken measurements. First you should draw a rectangle, in which the back half and the half of the gear will be built. The upper and lower sides should equal half of the chest circumference, and the lateral sides - the length of the product. From the upper corner it is necessary to retreat by the size of the measurements "chest height" and "back height and pass to the waist" and to draw additional horizontals. The first will be the line of the chest, and the second - the waistline. From the last one should retreat another 20 cm and designate the line of the hips. Continuing to create a basic grid, note the width of the back and calculate the width of the armhole to draw additional verticals. To do this, along the line of the chest from the left side of the rectangle, the value of the measure "width of the back" recedes and put the point from which the armhole begins. To calculate its length, you need to divide half the volume of the breast into 4 and add 2 cm. This value is also marked on the chest line and put a point. The remaining part will refer to the front shelf.

Then proceed to the designation of shoulder seams and neck. Here everything is quite simple: from the upper corners, the corresponding half of the neck girth recedes and allocates the shoulder area. In this case, the extreme point should be lowered by 1 cm, and on the side of the back, the rounding of the neck should be raised by 1 cm, and the shoulder suture is also drawn with a bevel of 1 cm. Then along the line of the chest in the armhole zone find the center and draw a rounded armhole to this Point, connecting it with the edges of the shoulder joints. From this central point, lower the side seams, which are slightly extended to the sides of the bottom line, in accordance with the volume of the thighs.

A loose dress excludes thawed tucks, which simplifies the construction of the template. However, if the landing is not satisfactory, the product can be slightly pritalit from the back.

Sleeve construction

For a summer dress free cut will be enough to handle the armhole. A warmer version will need to be completed with a sleeve. It can be intact or vnutrichnym. They are built in different ways. If you continue the shoulder seam and, cutting the details of the base of the dress along the side seam, withdraw the lower section of the sleeve from it, the whole-cut version will come out. For the hanging sleeve it will be necessary to fold the base parts over the shoulders and transfer the shear section to a separate sheet for the drawing. After the top rounding, you will need to climb 1.5 cm and finish the circle based on the contour of the resulting line. On the lower border of this figure on the center should place a measurement of the grasp of the upper part of the hand and draw the pellets descending along the boundaries of the circle and reduced to a straight line.

Decorative elements

The dress will come out really refined, if you use the decor correctly. For example, monophonic knitwear can be diluted with lace, inserted in the shoulders or around the neck. You can also beat a contrasting combination of identical quality sheets. Free dresses, photos of which are presented in the article, have various decorative ornaments that can serve as an example or inspire more interesting design ideas.

In addition to standard decorating options, you can experiment with textures. For example, make a dress with a light chiffon collar and sleeves on mother-of-pearl buttons. In combination with dark knitwear, this dress will be an excellent office option.

Do not forget about such elements as pockets, they will perfectly complement the free dresses. Photo finished products on the models will determine the most appropriate location of these elements. Proreznye, overhead and with a sheet, decorated with rag roses, rhinestones and sewn stones on the strict silhouette of a wide cut, they will look very harmonious and make the image interesting and stylish.

Assemblage of details

In order to make the product qualitative, you need to sew all its elements in the correct sequence. First of all, work is carried out with the front shelf, in particular, pockets and other model elements are made out. Next comes the turn of the shoulder seams and the sewing of the sleeves. After the side cuts are closed and the bottom is sewn up to the neck. Next comes the processing of the bottom of the sleeves and hem.