Freddie Kruger's glove - how to make your own hands

Are you going to go on Halloween? Are you a fan of the horror film "A Nightmare on Elm Street" and plan to wear the main character's costume for the party? Then this article is for you. The main attribute of the suit is Freddie Kruger's glove, you can buy it or make it yourself. The article will tell you about several manufacturing options.

First option

To make this accessory, you need to prepare:

• Leather glove (not important, left or right);
• Wire diameter of five millimeters, one hundred centimeters long;
• Scotch;
• Sticking plaster;
• Satin ribbon;
• glue;
• file;
• Acrylic paint in the tone of the glove;
• Your skillful hands.

How to make a glove by Freddy Krueger

Take the wire and cut into five pieces. Each segment should be a length of fifteen centimeters. Finish the wire with a file. But do not get carried away. The made accessory should produce a frightening impression, and not be a dangerous weapon. Then, the opposite end of the wire bend according to the length of the finger.

Take the glove and put it on. Attach a piece of wire to the finger (to the back of the palm). Wrap tape or tape, impregnated with glue, from the tip of the finger to the base. You can attach the claws differently. To do this, at the end of each finger gloves make holes that are equal to the diameter of the wire. Fix the wire to the fingers with adhesive tape or tape. And gently put on the glove, pushing the claws into the holes. Do the same with the rest of your fingers.

Take the paint and dye your fingers wrapped in tape. But do not paint the wire, as it can oxidize and rust. It is possible to cover the claws with steel paint for protection. The mobility of the brush in such gloves is limited. The fingers are in a half-bent state. If you want the arm to be more mobile, then attach the claws to the middle, and preferably to the upper phalanx. But reduce the length of the wire, otherwise it will not hold properly.

Here is the glove Freddie Krueger, made with his own hands. To add color to the product, you can attach a red thread to the tip of the claw. When working, be careful not to cut yourself.

The second variant of making the main attribute of Freddy Krueger

For this you need: a leather glove, an adhesive tape, a foil, a cardboard and a paint. Take the cardboard and cut out of it four rectangles. The width of each should be four centimeters, and the length - no more than ten. Then fold the rectangles in half. Trim the tips in such a way that the claw turns out. Cover the cardboard with foil. Attach the finished "blades" to the leather glove. To do this, use an adhesive tape. To make it right, attach the nails to the already worn glove. Then paint the scotch in the tone of the accessory. You can use an adhesive plaster, it is easier to color. As everything dries, Freddy Kruger's glove is ready!

The third variant of manufacturing

Claws for a glove can be made from ordinary office paper. This is quite easy to do.
Assembly diagram:

1. Take a square sheet of paper. In half fold it on the diagonal. Reverse the fold.
2. Turn the leaf forty-five degrees and place it in front of you.
3. Both corners bend to the middle (according to the drawing).
4. Fold the workpiece in half. Should be a triangle.
5. On the long side of the craft, mark the middle, and bend the bottom of the part.
6. At the bottom, wrap the workpiece.
7. Do this twice.
8. Tip the tip of the paper.
9. Spread the resulting claw so that you can put it on your finger.

Each claw paint with silver paint. Then make holes in the glove. Carefully put it on top of the claws. Here is the glove of Freddie Kruger. The drawing can be viewed above.

As you can see, gloves can be useful not only in the cold season, they can also be used to create an awesome attribute for a carnival costume.

Addition to the image

So, how the glove of Freddy Krueger is made, was considered above. Now we need to complete the image of the hero-villain. For this it is necessary to find in old things:

• Two shabby black and burgundy t-shirts ;
• A hat, best eaten by a moth.

Then we proceed to interesting and creative work.

Completing the image

Take the scissors and T-shirt. Carefully cut out of it wide strips, but leave the side seams to hold the tank top. When the product is ready, put it on top of a whole T-shirt. Should be a striped jacket.

For a more awesome effect, apply make-up. Take a foundation. Press it into the bowl, add to it a thick gouache of the color you need. Stir well and let the mixture dry. Then dilute it with vegetable oil until necessary density. Apply makeup with a thick layer. Make appropriate irregularities on the face. At the top make up friable powder or talc.

Put on your hat, striped t-shirt and glove with claws.

We hope that the above options for making gloves with your own hands will help you create the inimitable image of Freddy Krueger for the celebration of Halloween, and you will not remain unnoticed at the party!