HomelinessTools and equipment

Electromechanical lock: installation by own hands

Many consider electromechanical locking a useful and convenient device. When using such an invention, it is no longer necessary to run to the gate and check who goes. Unauthorized penetration into the entrances and under the hood of the machine can also be prevented using a simple electromechanical lock.

How to choose a device type?

There are two types of models: internal and external. If it is required to perform the installation of an electromechanical lock on the gate, it is appropriate to apply an outdoor model. The differences of the devices depend on the type and material of the door or other surface on which the device will be mounted, the permissible level of supply voltage.

The cost of such a product is higher than, for example, an electromagnetic lock, but at the same time it is more practical, durable and reliable.

Classical equipment consists of a number of elements, among which:

• Power Supply;

• intercom;

• Call panel;

• Castle;

• Keys;

• External patch panel;

• Postings;

• box for the device.

Having a lock with a full set of accessories, it can not be installed, and the process itself will not take much time. Even a beginner will cope with the installation of an electromechanical lock in 30-60 minutes.

Working with this technique, strictly follow the instructions to avoid mistakes. The lock can be opened with a key or by pressing the doorphone button.

Tools and consumables for mounting the structure

To carry out the installation of an electromechanical lock, you will need:

• Combined cable;

• metal wire (3-5 mm) of high strength;

• a set of power tools: a drill, a Bulgarian, a set of drills;

• Insulating tape;

• mounting collars;

• Locksmith tools: screwdrivers, wrenches, pliers.

Mounting the electric lock on the gate

When starting work, do not forget to read the installation instructions. In it the scheme of connection and features of installation of a product is described step by step.

Why read the instructions? Faulty actions can lead to breakage of the lock during installation, as a result, further operation of the product will be impossible.

Step-by-Step Guide to Installing Electric Locks

Of all kinds of anti-vandal devices, according to customers, the best device is an electromechanical lock. Installation instructions consist of a number of recommendations:

  1. The process of installing the external system begins with the marking of the holes. The product is applied to the intended fixing point on the gate and marks the places where the fixing holes will be drilled using the marker.
  2. Drill holes drill.
  3. The lock is placed on the gate and attached.

When installing an electromechanical lock of an internal type, the installation takes place in the following sequence:

  1. A small hole in the end of the door / wicket is cut with a Bulgarian, corresponding to the size of the electric lock.
  2. Make a marking of the hole for the entrance of the crossbar. You can use the metal response bar - so doing the markup will be easier.
  3. The bar must be attached to the attachment point. Align it so that it is directly in front of the lock, then mark the place under the bolt.
  4. Having coped with the previous step, it is necessary to note the fixing points for the counter plate.
  5. Drill holes.
  6. Cut the place under the bolt.
  7. Attach the bar to the desired location using the screws.

How to build a cable from the lock to the intercom

If the combination cable is not included, purchase it in the store. It is necessary to power the electric lock and transmit the signal and video to the doorphone screen.

To find out what brand cable is needed for the lock, you need to study his passport book, but you have to determine the meter yourself.

Experts recommend to lay the cable the shortest path from the gate or the entrance door to the near wall of the house. Sometimes it is stretched through the air, a fence or let it go underground. For the cable stretched in the air it will be necessary to build an additional support. Pull out the steel wire or rope to prevent a possible break in the connection. Running the same cable under the ground, it is placed in a metal or plastic tube of small diameter.

The call panel is mounted on the outside of the site. The height at which the mechanism is attached is indicated in the product passport. On this self-made installation of an electromechanical lock is considered complete.

Features of the installation of an electromechanical lock for the bonnet of the car

Electric locks belong to the category of protective devices. It is based on an electric drive blocking the car's hood. When the signal is received, an electromagnet is triggered, which causes the bolt to remain stationary.

To open the hood, the driver just press the button. After this, the rod will be attracted by an electromagnet. This design is suitable only if there is a direct current to supply the magnetic mechanism.

Advantages of the lock for the hood of the car

Electromechanical self-locking has several advantages over analogues, which makes it advantageous in the selection of anti-vandal devices. The advantages of such a mechanism include:

  • Simplicity in operation. One button press is enough to unlock the hood cover;
  • The security of the machine from intruders;
  • The installation of the electric lock is simple.

Along with the advantages, there are some drawbacks to such systems. In the event of a complete depletion of the battery, you will have to use an emergency cable to gain access to the engine compartment of the car. Owners say that this method does not always work and sometimes it takes a lot of time to unlock the car. Sometimes this is a lot of trouble.

The installation of an electromagnetic lock on the hood of the car with their own hands is under the power of any car owner. Despite the fact that it is necessary to encounter an electrically conductive device, its installation is simple in comparison with a mechanical lock for a machine.

To complete the tuning of the car, the owner, in addition to an external lock, will have to mount a hidden button inside the car.

Important! External and internal elements of the structure, as well as all the necessary details, go in one set and are sold in the kit.

Installation of the electromechanical lock of the hood is completed at the stage of laying the wires and connecting the button with the product, according to the instructions.

Mortise lock for the entrance door of the entrance

The most reliable thing is a door with a semi-mechanical lock. The installation of an electromechanical lock on the door takes place in the following order:

  1. Attach the lock to the door leaf and make it a paper template.
  2. Mark the housing niche and the locations for the mounting holes.
  3. Cut out the intended niche and bolt holes.
  4. Insert the locking mechanism into the hole and groove and secure it securely.
  5. Mount the code panel and connect it to the mechanism itself.
  6. At the door jamb, drill holes under the bolts and install the bar.
  7. Check the lock for functionality.

In the accompanying documentation for blocking (code) locks there is always a liner with instructive recommendations. If you follow them, the installation of an electromechanical lock in the entrance will not seem complicated.

Important! If you do not have a fitter, and you do not have the skills to work with such a tool - better consult a specialist.

Advantages and distinctive features of locking devices

Buyers note a number of advantages of electromagnetic locks, highlighting the main:

  • Unlike the lock and cylinder locks, the electromechanical blocker is reliable;
  • Such product is subject to continuous operation for more than one decade;
  • In the event of a breakdown, the lock is easy to repair, repairs are performed quickly and, as a rule, do not cause problems;
  • This design is suitable for mounting on the wicket, the hood of the car door in the entrance, the house, the office, the garage, the basement, which indicates the multivariance in use;
  • You can manage such a security system remotely, which, you will agree, is very convenient;
  • The lock is easily locked from the inside, and it can only be opened by means of an incoming signal;
  • Such products are characterized by a low price policy, because they are available for every average consumer.

If you buy a lock in a specialized store, complete with the product, you can order a package of additional services for installation and maintenance of the product. Electromagnetic locks from the leading companies in the market for the production of blockers are of good quality and reliability.

Hopefully, this article will help you determine the choice of anti-vandal system, lock the lock for the door of the entrance, electromagnetic device for the gate. And by purchasing such a product, you will appreciate all the advantages of using the device on your own experience and without any problems you will be able to perform the installation of an electromechanical lock.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.