Dimensions of the suspended toilet with installation, installation, feedback

Recently, the tendency of installing a toilet bowl of a hanging type has become fashionable. Such an option for installation works is considered quite affordable. Among other things, it is more hygienic, since the landlady will not have problems with washing the floors. Some home masters express the opinion that a suspended toilet bowl whose price may be slightly higher than usual is an unreliable construction. It's not like that at all. Before purchasing, you can independently choose the dimensions of the suspended toilet bowl with the installation, this will effectively distribute the free space.

The statement about unreliability can not be called justified. Using a standard frame, you get a guarantee of safety, among other things, it can withstand up to 800 kilograms. If you use attachments without installation, then it will withstand 400 kilograms of weight. If you decide to purchase such plumbing equipment, then you need to familiarize yourself with the order of the installation works.

Preparing for installation

Suspended toilet bowl, the price of which can vary within the limits of 2000-15000 rubles, should be mounted after carrying out preparatory works. In the process of manipulation will have to use a ready frame, which is to be fixed, and after collecting all the components. The master must consider that the finished frame is quite expensive, so the entire installation option will be costly.

A hinged toilet, the photo of which is presented in the article, can be installed and to a monolithic base made of concrete. In this case, the device must be mounted on the outlet of the rods, which are attached to the supporting wall. As a function of a monolithic base of concrete, the lower part of the sanitary device is held. In the concrete structure there must be a coupling, which is intended to ensure the discharge of impurities.

Technology of work

If you decide to purchase a Vitra hanging toilet, you will first need to mount a drain socket. After that, the master must determine the height at which the device will be located. If necessary, an adjustment can be made. For this purpose, the coupling is cut off, or the pipe is built up by means of a branch pipe. Professionals recommend the use of shields for formwork, the margin of which is 5 centimeters or more.

If you use the installation instructions, you should be aware that it requires the use of the most accurate measurements between adjacent mounting holes. Most often, as an optimal figure, choose 20 centimeters. In the role of the bill board, OSB or chipboard is perfect.

Recommendations of the master

The toilet panic Villeroy is installed according to the technology described in the article. It should be noted that before making holes, it is necessary to attach the product to the formwork. This will allow you to check how correctly the markup is done. The maximum deviation is a figure within 5 millimeters.

In the next step, it will be necessary to cut off the threaded rods of the required length. In this case, it is necessary to combine the thickness of the penetration with a step from the toilet to the wall, adding to this figure the thickness of the sanitary device at the installation point and the length of the free end, which will be necessary for the exact tightening of the nuts.

Installation work

Initially you have to determine the height of the installation of the suspended plumbing fixture. Fixation will be made through the wall, while you will need to prepare the nut M-20, as well as the washer. This method can be called as simple as possible, and also universal, while at the heart of the walls can be absolutely any material.

The main condition is the stability of the walls to bending. Before you will be the task of drill through them. After that, you have to install the rod and put a washer on it. At the last stage, tighten the nut.

Fixing the toilet to the most durable walls

If you purchased a hanging toilet with a micro-lift, it can be installed to very strong walls, without the master having to make a through hole. In this case, the rod can be fixed with the aid of glue intended for concrete. In this case we are talking about a chemical anchor.

This approach will ensure maximum reliability of fixation in walls, which are made of durable material, namely full-bodied or hollow brick, concrete blocks or wood.

Wall strength

The wall must be designed to withstand loads of an average level, whose weight is 400 kg or less.

If in a bathroom the walls are made of heat-insulating aerated concrete with a density of less than 400 kilograms per square meter, then it is necessary to refuse attachment by this technology.

Methods of work

In order to install the toilet Delfi hanging, you need to drill a hole, the depth of which is 15 centimeters. It will need to be cleaned well from the formed dust, and then pour glue inside. The master must install the rod, and then mount the shields. The first of these is the central one, in which the holes for the rods are located. The second shield is the one on which the toilet will be fixed, while the third will become lateral - when it is fastened, it is possible to close the openings of the coupling outlet.

What to look for

It is important to analyze how well the shields are located. To do this, use the building level. The next step will be the installation of rods to fix the plumbing fixture. In order for the formwork to become stable, it is necessary to tighten the nuts that will hold the suspension device.

Nuances of works

Installing the toilet, the photo of which is presented in the article, you need to check how accurately the marking was done. If there is a need, you can make some adjustments until the concrete is poured. In order to form a cavity in the concrete, it is necessary to fix a piece of foam plastic, this will later allow the connection of the drain to the device.

Pouring concrete

To carry out this step manually or with a concrete mixer, you need to prepare a special mixture, which will consist of crushed stone, cement, sand and water. Threaded rods are important to close the film to prevent the mixture from accidentally entering them. To compact concrete it is necessary to stitch it, which in particular concerns the angles. Formwork should be left for one week at room temperature.

Feedback on the features of the connection

In the store, you should check the set of the hanging toilet bowl - only so you can make the correct installation. As the domestic craftsmen note, corrugation with a diameter of 4 centimeters should be installed in the cavity of the plumbing fixture. The water is drained to the stop, and after that the free space needs to be poured with a universal sealant. Experts advise: to fix the corrugation it is necessary to stand for 3 days at room temperature. Home masters recommend: before installing the toilet , you need to use a silicone sealant, which is applied to the joints of the device with a rubber ring of the corrugation.

The toilet bowl should be put on the mounting rods of the rods, and after the washers are installed and tighten all nuts. This design is maintained for a day, after which it is possible to proceed to connect the drain tank to the toilet with a flexible corrugation. At the final stage, as consumers note, it is possible to install a cover of a plumbing fixture. On this, we can assume that the installation is completed.

Toilet bowl dimensions with installation

If you are interested in the dimensions of the suspended toilet bowl with installation, then it is worth more carefully to deal with this issue. Here you need to pay attention to some of the nuances. Manufacturers emphasize that the size of this plumbing fixture is much smaller compared to the dimensions of a traditional toilet bowl. This belief can be considered correct and erroneous at the same time.

If you plan to install such a device inside the hruschevka bathroom, then you will not be able to win with dimensions, alas. All due to the fact that the installation will occupy a certain space in the false wall. After installation, the dimensions of the hanging toilet bowl with the installation will really seem smaller, however the room itself will be reduced in size because the communications will hide behind the partition.

For owners of private houses, where there is no problem of a shortage of free space, the use of a suspended plumbing fixture is the most optimal solution. This model looks compact and modern.

Conclusion

If you are interested in the dimensions of the suspended toilet bowl with installation, it should be noted that such a device will take up more space in the bathroom than conventional analog sanitary equipment. However, looking like a room will be aesthetically pleasing, it needs to be taken into account when choosing a design. Only in this way you can equip the interior, which will look good and suit all household members.