Cross-shaped set of knitting needles: detailed description

Knitting is one of the oldest ways of making clothes. But it is not enough to connect, it is necessary that the product is beautiful and durable. Work begins with the first row, the so-called typing edge. It can be performed in several ways. Further work depends on the skill of the needlewoman.

Ways to work with a thread

Each knitter works in her own manner. And you can not say that everyone equally uses knitting needles and thread. Someone prefers that the spokes are on top. In this case, the brush is also above the needle and the cloth. Other masters choose a different way of working, holding the spoke like a handle, from below. In any case, all needlewomen work in such a way that you simply admire it.

Interesting ways to work with the thread. If the needlewoman prefers that the thread is in her left hand, she uses the continental way of knitting, whereas if it is a right hand, this kind of work is called English.

The right-handers and left-handers are working differently. They have different directions of knitting. Some prefer to turn work from right to left, and others - from left to right. One of the ways of knitting does not involve turning the blade at work. The more skilled the needlewoman, the quicker and more intricate work turns out.

Set with a long string

Any knitting begins with a set of loops on the spoke. Craftsmen use two main methods. Some prefer to draw loops from a long thread, while others prefer a short one, or from the beginning of a tangle.

To start a set of loops from a long thread, it must first be unwound from the tangle. Often, needlewomen measure the length in their opinion and perform the first loop. The rest are tied up next. As a rule, having executed the necessary number of loops, they find out that a decent piece of the already unnecessary thread has remained. It should either be cut off, or continue knitting, weaving it into the product. It also happens that the exhausted thread is not enough to complete the series. In this case the needlewoman has to dissolve the work and start all over again, having rewound the longer thread.

The loop is set as follows. The master takes one or two spokes, on which the initial set of hinges is sprinkled. You can execute them in many ways. At the same time, the loops are fixed with the longest end of the thread. The method is suitable for both knitting from yarns of the same color, and for working with two colors.

Set with a short thread

Some masters prefer to work differently. They either use the end of the thread, not exceeding 10 centimeters, or work directly from the coil.

A sliding knot is performed on the spoke . It becomes the original loop. From this loop, the following is bound, which must also be returned to the spoke. Now there are already two loops. The rest are carried out in a similar way.

Skilled craftsmen know many options for the selection of loops. They are carried out and on auxiliary threads, and on junk, and by means of contrasting color. There is also a way in which a chain of air loops is preliminarily performed using a hook. It becomes the basis of knitting.

Ways to work with a long thread

In the overwhelming majority of cases, needlewomen prefer to start knitting from the first way of tying loops - using a long thread. It is basic and can be executed in a variety of ways. Which option is preferable in this or that case, the masters decide independently or are guided by the recommendations to the product scheme.

The completed set edge can turn out decorative, and elastic, and rigid. You can work with either a single thread, or with two, three, and so on.

If the skilled worker can choose the desired set of loops, then the product will turn out to be beautiful, and its edges will be strong and elastic. In the future, the thing will not lose its original form.

"Bulgarian Beginnings"

The cross-shaped set of knitting needles is one of the preferred ways to unearth the edge of the article. Also, this method is called "Bulgarian zachin." The cruciform set of loops is one of the oldest methods. Apply it when you need to tie the product in which there is no gum. As a rule, the main drawing of such things starts from the very edge. But nevertheless the cross-shaped set of loops with knitting needles is also suitable for tying gum with the rapport 2x2. The edge of the thing will turn out to be original.

A set of loops in a cruciform way provides the product with a smooth, neat edge. In this case, the three-dimensional interlacing of the used threads serves as an additional element of decorating the thing. If you want the edge of the product to be strong and hold the shape well, a double cruciform set of loops is suitable.

An obligatory condition for using this variant of the set-up edge is that after it needlewomen are tied with a series of inlaid loops. It is considered to be zero, that is, the starting row, from which the work is done.

As a rule, one or two needles are used for tying up the cross-shaped set of needlewomen. It depends on the thickness of the yarn. It is important to make sure that the length of the primary and secondary threads is the same. Only in this case the edge of the product will turn out to be excellent.

Running the set

Very many women prefer knitting to all kinds of needlework. Cross-shaped set of loops allows you to create products that perfectly hold the shape and at the same time are performed without gum. The edge itself looks neat, and the resulting thickened edge also performs a decorative function.

To work with this kind of set of loops is difficult, so it is used by skilled workers with experience. Nevertheless, after experimenting a bit, even the needlewoman with a little experience will understand what a cross-shaped set of loops is. The master class for this kind of knitting is simple.

Master Class

First you need to take the thread and fold it twice. The work begins in the usual way, as in the simple method of typing with a long thread. It is laid in the left hand so that the end bends around the index finger and hangs freely from it.

The first loop also does not represent anything unusual - it is done in a classic way. But then you need to change the position of the thread. It should be captured with your thumb. They need to move in a circle and counter-clockwise.

Then the knitting needles are inserted under the formed double filament. They must be on the inside of the job. Next, you should grab a single thread that is on the index finger. After that, the second loop is pulled out.

Again, you need to change the position of the thread in your hand. This time the finger should move clockwise. The spokes are now inserted from the outside. They should be under the resulting double thread.

Next, the master should take the thread that turned out on the index finger and pull out the third loop.

Cross-shaped set of loops consists of alternating arrangements of the thread and ways of its capture. The main thing is that the master does not get confused in the process of work.

It should be remembered that when the spokes are on the inside of the work, you can see the formed bulk jumper located at the top of the hinges. In the same cases, when the spokes are inserted from the outside of the product, the jumper is lower. If the needlewoman remembers this feature, then the cruciform set of loops can be performed with knitting needles without difficulty.

After the resulting set-up edge, you need to tie the series with the wrong loops. After that, you can start working directly on the pattern.

Finally

Using the cross-shaped set of knitting needles, needlewomen make sure that the edge of their product looks neat and smooth. It comes out beautiful and durable. It is not easy to perform such a set, but it is possible.