Copper sulphate for the pool: reviews, dosage

Put the pool on the site - the idea is very attractive. Especially since today there was a huge number of opportunities. It is not necessary to install a stationary pool, it is enough to collect a temporary construction for a summer period or even buy an inflatable pool. However, this does not solve the problem. If the volume exceeds 100 liters, then draining it daily is very problematic. And without it, the water starts to bloom and becomes unacceptable for bathing. Cleaning the pool with copper sulfate is attractive in terms of the fact that this drug is cheap and there are homes almost all.

What is copper sulfate?

Virtually all gardeners are familiar with this substance. Opening the package, you see a powder or crystals of blue. They have no taste, although they contain 24% of copper. The powder dissolves very well in water, and is gradually eroded in the air. It is produced by dissolving copper in sulfuric acid. The obtained substance is used in industry and construction, in food production as a preservative. But that is not all. Copper vitriol is widely used in animal husbandry, as a mineral fertilizer. In addition, it is used by physicians, since antiseptic, cauterizing and astringent properties of this substance have been known for a long time. Weak solution (0.1%) is recommended for gastric lavage during poisoning. This once again proves that in small amounts, any poison is a medicine, it's all about the correct dosage. Therefore, the pool can be cleaned with copper sulfate, but everything needs to be carefully calculated.

What you need to know about

Even before the installation of the pool, you need to think about how you will maintain the condition of the water in the norm. If there are small children, then such an assistant on the site can become very useful, and even necessary, but only if the water in it is of proper quality. Bathing will bring a lot of fun and keep your health. However, if children splash in it all day, by the evening the water will not be very clean, and soon it will be attacked by leaves, midges and other garden animals. But this is not the biggest trouble, you can simply collect the net. But when the water begins to turn green after a few hours, you need to take action. Very often copper sulphate is used for the pool. The reviews point out that this is an effective tool for preventing the flowering of water. Whether this is in fact, it remains to be seen.

Principle of cleaning

We need to learn from nature itself. Why does not the lake flower in the lake? The answer to this question has long been received. The fact is that the garbage is light and heavy. The second settles down, and the first climbs up and forms a film. It is he who causes the flowering of water. Standing lakes have solved this problem in the simplest way. Feeding the reservoir with spring water allows you to raise the level, which means that the top layer of contaminated liquid flows into the brooks. Stationary pools also use this way, but it requires solving two issues:

• Where to take clean water?
• Where to put dirty?

There were pumping filtration units that can effectively purify the water in the pool. But their cost is rather big, this is what drives people to find an alternative solution. In particular, one of the options is a copper sulphate for the pool. Reviews say that if you use it in the right proportion, then there will be no harm from the application.

Money issue

Indeed, copper sulfate is used at home by many. This is a cheap tool, which, moreover, is on the farm almost constantly. In doing so, add it to the water in a variety of proportions and sincerely believe that it is necessary to use copper sulphate for the pool. The reviews of some summer residents contain recommendations for adding blue powder to water, but do not take into account at all that this is the strongest poison. Of course, relatively recently there was no alternative, so this solution can be understood from the point of view of everyday necessity.

Today there are safer means, and therefore it is not recommended to use copper sulphate for the pool. Experts say that this connection can not be used for water purification, since it is difficult to calculate the required proportion, and it's dangerous to pour on the eye. In swimming pools, children swim most often, and they are very susceptible to various allergens and harmful substances. After all, you are sure that the fun in the water will add to the kids health, while themselves while adding vitriol to it, which is mixed with bleach.

Cleaning products or chemicals

In fact, there is a choice today. To do this, various household chemicals or ready-made plant products are used. Specialists say that purification of copper sulfate water is unreasonably popular.

• It is much safer to use factory products. They are specially created with the condition that the active ingredients break up after completing their task. There is a choice today, so buy funds on the basis of active oxygen. This is the safest option, but it should be used with great care, following the instructions.
• Chlorinated preparations. We are all accustomed to the specific smell in the urban basins, so if there is a question about how to clean the water in the domestic water area, chlorine is first of all recalled. This is far from safe chemistry, despite the fact that it is disinfected with drinking water. Yes, it is a necessity, but it is better to use other methods of cleaning.
• Preparations based on bromine are less aggressive than chlorine, but they are not completely harmless. However, it does not have a sharp odor and does not irritate the skin.
• Copper vitriol for water purification in the pool - this is folk art, not the safest. This is not a matter of concentration. Even if you carefully measured the required amount, this does not guarantee your safety. The matter is that copper sulfate actively reacts with many substances that are contained in water. Nobody will give a guarantee that the resulting connections will be loyal to your skin.

Our business is to warn

Despite all the caveats, many continue to use copper sulphate to clean the water in the pool. Then it remains to find out which dosage is the most safe. Due to its properties, vitriol kills all living things in the pool, and the water in it remains clean, but how safe is it for a person? Turning to the scientific literature, we can read that a dosage exceeding 0.6 g causes severe vomiting. But this is if the drug gets inside the body. Will you give a guarantee that the child does not swallow the water while swimming? That is, we can say that it is permissible to use copper sulfate for the pool. Dosage should be observed as accurately as possible so that there are no consequences. Better yet, consult the manufacturer of your water area and find out what to clean the water.

Proportions

How much copper sulphate is added to the pool? Let's find out. The following proportions are given on the packaging. It is necessary to prepare a solution from table salt, copper sulfate and water. To do this, take an accurate scale and measure out the required amount, based on the volume of your pool. For every 1,000 liters, you need 0.9 g of copper sulfate and 2.7 g of salt. This is a relatively safe tool. You can add copper vitriol to the pool directly into the mixers that are located on the pipeline for the supply of liquid.

Pool on site

If you intend to use it exclusively for the family, then you can not come up with complex cleaning schemes. Copper sulphate for water in the pool in this case will be just superfluous, it is enough to take a shower before you decide to swim, and lightly shade it from the scorching sun.

If you have many guests and they are not against water procedures, then the problem of cleaning gets more acute. But do not worry: carefully observing the proportions, you can use copper sulfate. It is quite cheap and safe. If adults mostly bathe in the pond, you can not worry about their health at all.

But if you grow up children who do not get out of the heat from the water, then it is recommended to think several times before using copper sulphate for the pool. The dosage indicated on the package may be safe, but who knows what it will lead to if the child swallows in the pool.

Instead of concluding

Can I use copper vitriol for water purification? This is a complicated question. The problem is that it is poison. In small doses, it is harmless, but exceeding the concentration is fraught with severe poisoning. Are you ready to risk your family's health? If not, then select factory water purification products based on active oxygen. Such solutions can even water the flowers, no harm from them will not. If you choose a budget option, then first read how much copper sulphate is added to the pool.