HomelinessTools and equipment

Convector "Termia": reviews. Convector electric "Termia": description, price, photo

The convector "Termia", which will be reviewed in the article, is very popular among consumers today. This is due to the fact that such heating appliances meet all medical, environmental and fire requirements. The convector is connected to the network by means of programming devices, as well as temperature regulators, which allow you to adjust the operating modes in the desired temperature range.

general description

Convector "Termia", reviews about which will help you decide the choice, can have different design features. However, the internal element is an internal heating element, which is enclosed in a decorative case. The latter is made of stainless steel. Convector electric "Termia" has one distinctive feature, which is the presence of holes in the body, the upper ones are intended for hot air outlet, while the lower ones are for the intake of cold air. In the lower part of the body there is a thermal heating element, in the structure of which there is a hermetically sealed radiator with a metal tube. Among other things, there are conductive components in the structure. In the body of the unit there is a special safety sensor, which is responsible for shutting down the system in the event of an emergency.

Features of use

If you decide to buy a convector electric "Termia", then you should read all the reviews. Such equipment has certain disadvantages, expressed in certain features of functioning. When the device is operating, convection air flows constantly move through the space of the room. This may prevent the room from heating evenly. In particular, this applies to buildings in which the number of floors is limited to a small number. This includes the basement, which is not heated.

Tips for choosing

Convector electric "Termia" should be selected depending on the material of the shell and power. Experts advise to purchase energy-saving options. The most optimal variant is stainless steel or aluminum, which forms the basis of the case. In this case, you can expect a longer service life. Consumers are advised to buy models that are subject to free warranty service. You can prefer the unit, the warranty for which will last for 20 years. Consumers have recently increasingly purchased ceramic convectors whose characteristics are more impressive compared to metallic analogues.

Characteristics of some types of convectors

If you decide to buy a convector electric "Termia", then you should read all the reviews. Such equipment has certain shortcomings, expressed in the features of functioning. When the device is operating, convection currents of air are constantly moving through the space of the room. This may prevent the room from heating evenly. In particular, this applies to buildings in which the number of floors is limited to a small number. This includes the basement, which is not heated.

Convector electric "Termia" should be selected depending on the material of the shell and power. Experts advise to purchase energy-saving options. The most optimal variant is stainless steel or aluminum, which forms the basis of the case. In this case, you can expect a longer service life. Consumers are advised to buy models that are subject to free warranty service. You can prefer the unit, the warranty for which will last for 20 years. Consumers have recently increasingly purchased ceramic convectors whose characteristics are more impressive compared to metallic analogues.

Characteristics of some types of convectors

Convector electric "Termia", reviewed in this article, can be plinth or usual. In the first case, the height of the device does not exceed 20 centimeters, whereas in the second case this parameter is no more than 40 centimeters. High electric convectors are more popular among consumers, since they have more power.

Description of skirting convectors

If you decide to buy a convector electric "Termia", the reviews will help you evaluate its advantages and disadvantages. As for plinth models, their temperature is lower, but they are not inferior in performance to analogues with more impressive dimensions. With this device, it is possible to achieve more even heating of the room, resulting in smaller air convection currents. Such heaters better heat the lower part of the room due to the location. Convector "Termia" EVNA of plinth type has a length which is equal to 2,5 meters. This can lead to difficulties in selecting the location of the units. The upper part of the room will get worse due to the location of the device.

Description of the convector of the brand EVNA-2.0 / 230 С2 (сш)

Convector electric "Termia" EVNA can be used for heating any dry rooms. The capacity of 2 kilowatts will be enough to heat the room, the volume of which does not exceed 50 cubic meters. The point here is when the device is used as the main source of heat. If there is a need for additional heating, then such a convector can be used in a room, the volume of which does not exceed 80 cubic meters. In the role of a heater in such a device, a ribbon or needle element is used which has a low resistance and a large heating surface. After switching on the device immediately switches to the operating mode. This allows you to ensure accurate maintenance of the required temperature indoors. If the economy is important to you, then it is worth choosing similar equipment that meets these requirements.

The main characteristics of the convector EVNA-2.0 / 230 С2 (сш)

If you are considering the convectors "Termia", the price of this equipment should certainly interest you. When choosing the equipment of the above brand, you will have to pay 2600 rubles for the model. The device can be used in one of two modes - 1 kW / 2 kW. The unit is equipped with a thermoregulator electromechanical type. Before buying, you should count on dimensions that are 740 x 450 x 110 millimeters. The device can be installed independently, as its mass is 5.3 kilograms. The case is provided with brackets in the amount of 2 pieces for fixing to the wall surface. Within 5 years you can rely on the manufacturer's warranty.

Additional features

If in the store you paid attention to the convectors "Termia", the price of this equipment should be interesting to you. You may have to pay a cost that is different from the above. But the installation work in each case will imply the need for a certain technology. On the wall it will be necessary to make a markup for 4 mounting holes, and it is worth using the scheme given in the manual. The master drills holes, and then sets screws in them. By means of brackets the convector is hung on the wall. If necessary, the equipment can be installed on legs without wheels or with wheels, but they are not included in the delivery.

The equipment is equipped with a thermostat that prevents freezing of the room due to the presence of an automatic temperature maintenance system at a minimum level of +7 degrees. The legs for the convector "Termia" will allow you to place the device in the right place together, if necessary, moving the unit.

Reviews

Convector "Termia", reviews about which you absolutely must help in choosing heating equipment, has many positive features. In support of this, the opinions of consumers who use the described units for a long time in their homes and offices are voiced. Among the positive characteristics can be identified that the device does not promote the combustion of oxygen, the air does not overdry, the humidity in the room remains unchanged. Consumers also like the fact that the temperature of the external surface of the case does not exceed 65 degrees during operation, this makes the device completely safe for adults and children. Convector "Termia", reviews about which you should read before the moment of shopping, can be operated even in those rooms, the conditions of which are characterized by high humidity. Buyers especially emphasize that the unit is equipped with an autonomous power supply system, which indicates the possibility of uninterrupted operation even when the supply of electricity is cut off. Reviews advise you to choose equipment that is equipped with a special thermostat. However, the device will cost a little more. The importance of the thermostat is difficult to overestimate, among other things, it is possible to install a thermostat for a group of convectors if they are located inside the same room. As the modern consumer emphasizes, electric convectors, which have a special thermostat, are an advantageous and convenient acquisition for operation.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.