Homeliness, Building
Consumption of water-based paint per 1m2. Consumption of water-based paint for the ceiling
Water-based paint is used for painting mainly ceilings and floors inside the premises. There are also varieties designed to decorate the facades of buildings. This type of decoration has a huge number of undeniable advantages and is unusually popular with the consumer. In this regard, many are interested in the possible consumption of water-based paint per 1m2. Knowing this parameter, you can accurately calculate the number of cans needed in a particular case.
How to know the consumption of paint
The amount of money that should be expended per square meter of surface area is indicated by the manufacturer on the label.
What can depend on the consumption of paint
The amount spent in this or that case means directly depends on what type of surface will be processed. In the event that the material of the wall or ceiling is characterized by high porosity or roughness, that is, if it is untreated concrete or wood, the paint will go a little more.
In case of decorating the old surface, previously whitened, the consumption of water-based paint per 1 m2 will depend on the degree of its contamination. That is, on the basis of how many layers must be applied to obtain a qualitative result. Usually, for normal staining, two are enough. Accordingly, the paint consumption will increase by approximately one and a half to two times. Usually at home, the old layer is not removed. However, experts still advise him to clean. In any case, if it is heavily polluted, it's worth it.
Consumption of funds for the decoration of ceilings
Calculation of consumption for painting walls
As for the walls, in this case the calculation of the dye is made approximately the same as in the case of the ceiling. First, after reading the information on the label, you will learn which area can be processed by one liter of the tool, and then calculate the actual consumption. Water-based paint for walls is also applied to the acrylic primer. The flow rate is approximately the same as in the case of walls - 1 liter per 10 m2.
What else can depend on the consumption
The amount of material necessary for the coloring of a particular surface depends not only on the roughness, porosity or smoothness of the surface, but also on what kind of tool was used during operation. So, the most uneconomical are long-haired or foam rollers. A little less paint will go away when using a tool covered with a bag of wool with medium length villi.
How to properly make the color
With proper and accurate painting, the paint consumption, of course, will be somewhat smaller. Below we will consider the most economical ways of surface treatment with water-based paint.
If you use a fairly expensive imported paint, two layers are likely to be quite enough. In any case, in order to reduce the consumption of water-based paint per 1 m2, do not put it on the surface of a thick layer. A few thin - it's neater and more economical.
Apply the second layer only after the first one has completely dried. This condition must be observed. Otherwise, the surface will not be very smooth and attractive. The paint of this type dries out quickly enough - in about two hours.
Thus, the norms of consumption of water-based paint depend on several factors. First, it is the type of surface to be treated. Secondly, the type of tool used in the work. Also of great importance in this regard is how correctly all the works were performed. Of course, in many ways the expense depends on the choice of the dye itself. Expensive options require the application of no more than two layers on the surface. In the same case, if you buy a cheap dye, you will most likely have to process the surface at least three times.
Similar articles
Trending Now